Browser Details: Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9b2) Gecko/2007121120 Firefox/3.0b2
From URL: http://hendrix.mozilla.org/
Note to readers: Hendrix gives no expectation of a response to this feedback
but if you wish to provide one you must BCC (not CC) the sender for them to
Product: Gran Paradiso Alpha 1
Browser Details: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9a1) Gecko/20061218 Minefield/3.0a1
Product: Gran Paradiso Alpha 1
Browser Details: Mozilla/5.0 (Windows; U; Windows NT 5.1; tr; rv:1.9a1) Gecko/20061215 Minefield/3.0a1
...12 to 12.5
I want to create a 12.5 server with 2K pagesize, and with the same device
names and sizes. (Except for the system devices). Should be able to do a
simple dump and load from the 12 to the 12.5 without mixing up the data and
log, correct? Thanks.
If the database is created with the same order and size of fragments
(rows in sysusages), and assuming same OS platform, yes.
> I want to create a 12.5 server with 2K pagesize, and with the same device
> names and sizes. (Except for the system devices). Should be able to do a
> simple dump and load from the ...Mobilink synchronisation with Ultralite and UltraliteJ
If you start a Mobilinik server, can you connect to it from both Ultralite
and UltraliteJ databases on the same port?
On 12/10/2010 8:20 AM, Shao Chan wrote:
> If you start a Mobilinik server, can you connect to it from both Ultralite
> and UltraliteJ databases on the same port?
Yes, assuming they are all using the same protocol (HTTP for example).
SQL Anywhere clients (dbmlsync) would also be able to connect using the
same protocol on the same port.
Reg Domaratzki - Sybase
Please reply only to the newsgroup
Documentation : Exer...sqlanywhere and sqlanywhere server
Currently i am using sqlanywhere and powerbuilder tool as my system
development. And i am developing a standalone system. Let say, if i want to
migrate my standalone system to client-server system, how do i do that? I
heard that i need to have sqlanywhere(server engine) to deploy my system as
client-server system. If so, do i need to install sqlanywhere(server engine)
into window NT or just normal pc(treat as server).
For client-server system, do i need to install sqlanywhere server at server
and sqlanywhere client as normal pc where my program is installed?
Could someone tell me where...Data case sensitive in ultralite and ultraliteJ
I have a problem about case sensitive of data in ultralite and
If I have a table articles like this :
And I have the request SQL like this:
select * from articles where name like 'd%' order by name
I test the request in ultralite and ultraliteJ.
I find that I can get 'Desktop' and 'drop' in ultralite and get only
'drop' in ultraliteJ.
It means that ultralite is case-insensitive and ultraliteJ is case-
My question is : Is ultralite case-sensitive about data?
...ERROR CONNNECTING POCKETBUILDER WITH SQLANYWHERE ULTRALITE 10
Hello!! I am developing a program in pocketbuilder 2.1.1042
with SQLAnywhere Ultralite developer edition 10.0.1.3579 for
an equip HTC S621 with WINDOWS MOBILE 5.
For the connection I am using a file .ini that contains the following thing:
I already have installed SQLAnywhere Ultralite developer edition
10.0.1.3579 in the equip HTC.
The connection in the application I maded it using connecti...SQLAnywhere and Novell 3.12
I have a site where there is a server with Novell 3.12 (will be going to
Win NT at some point) and SQLAnywhere 5.0.03 build #884 running on it.
The utilization (as shown by MONITOR.NLM) occasionally hits 100
whereafter the system freezes almost permanently. The network manager
resorts to the 'big red switch' to get the system going again.
Occasionally is happening more frequently than tolerable now. Are there
any suggestions as to what to look at or what can be done.
1) upgrade to 5.5.04
2) Look at your queries/procedures. Make sure your execution ...SeaMonkey Triage Week (2010-12-06 to 2010-12-12)
The SeaMonkey project needs your help triaging our bug reports in
Bugzilla, to reduce the amount of bugs with an unknown status (see ).
We have many UNCONFIRMED or NEW bugs where it's not clear if they are
still an issue or not. To get these numbers down to a reasonable level
while focusing especially on the UNCONFIRMED bugs, we need your help
looking at those bug reports.
To make it easier for you, we look at different components each day and
have three time slots each day so everybody should have the chance to
join us on irc.mozilla.org in channel...Perl 6 Summary for 2005-12-05 through 2005-12-12
Perl 6 Summary for 2005-12-05 through 2005-12-12
Welcome to another Perl 6 summary. This week, like last, Parrot has
produced the highest volume of emails. Fine by me, Parrot tends to be
easiest to summarize. This summary is brought to you by Snow (the lates=
soft toy in the house). I would say you should get one, but apparently
Borders stores everywhere are sold out of them. He is quite soft and a
little mischievous. Maybe he belonged to a samurai once...
Perl 6 Compiler
Mike Li wondered how to make his sample code w...is there a way i can get just this part of date 12/12/2007 as opposed to 12/12/2007 17:42:00 by using getdate()
is there a way i can get just this part of date 12/12/2007 as opposed to 12/12/2007 17:42:00 by using getdate()
select convert(varchar ,getdate(),101)Thanks, Mahadeo-----------------------------------------------Best is Not the END point, but a starting point for Innovation------------------------------------------------Remember to mark posts as the "Answer" to help future users.
101 gives mm/dd/yyyy format. If you need dd/mm/yyyy, try
select convert(varchar ,getdate(),103)
See this for other formats -- Please Mark Posts that helped you a...SQLAnywhere 5.04 running on Novell 3.12
Has anyone out there experienced any problems with the NLM for
SLQAnywhere running on Novell 3.12. We are seeing some very weird
results. After the database server runs for a while (that can be
anywhere from 4 hours to 4 days) it will just up and unload itself or
the server will abend. Sometimes it also abends the file server,
sometimes not. All that appears to be consistent is the fact that after
DBSRV50 unloads - there is a message stating that xxxx resources could
not be recovered (from the Novell server).
We have tried 5.01 - 5.04 and appear to be getting the same results. ...pbcat tables from SQLAnywhere 5.5 to ASE 12
What's the best, easiest way to get the info from the pbcat tables (namely
pbcatcol, pbcatedt, and pbcattbl) in a SQLAnywhere 5.5 database to the new
database on ASE 12?
We are moving from SQLAnywhere to ASE and we would like out edit styles and
everything else to be migrated to the new database.
The short answer would be to use pipelines to get the data in the five PB
tables from one database to another. However, as one database may have
issues with certain datatypes and formats... etc. you may have to tweak them
a little as the need arises.