Future of PowerBuilder #2Hi,
Can anybody point me to a good documentation or an article
about the future or the prospect of PowerBuilder??
Any feed back would be appreciated.
Thanks
AK;
There are MANY threads in sybase.public.powerbuilder.futures.discussions NG.
Here is a link to a very knowledgeable website:
(http://www.techno-kitten.com/Changes_to_PowerBuilder/powerbuilder_s_future2
/powerbuilder_s_future2.html)
HTH,
Austin
<AK> wrote in message news:3f3bf83f.5e1.846930886@sybase.com...
> Hi,
> Can anybody point me to a good documentation or an article
> about the future or t...
The Future of Powerbuilder #2I work for a fortune 500 company who is looking at developing a client
server software package. It is of course geared to be web enabled as well
as normal client server. As a Powerbuilder and Visual Basic programmer for
more than 8 years I believe that going with Powerbuilder on this project is
a good decision, my colleagues and managers does not. It has been rumored
for some time now that Powerbuilder is dying a slow but eminent death and
I'm rather saddened by this since I personally feel Powerbuilder is a great
tool to work with. I couldn't find any substantial informa...
Smoke [5.12.2] v5.12.2 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu) #2Automated smoke report for 5.12.2 patch 7a3b65c9d99f69553fffe01f73d49fe9abf=
95120 v5.12.2
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using cl version 13.10.3077
smoketime 6 hours 55 minutes (average 41 minutes 30 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M ...
Smoke [5.12.2] v5.12.2-2-gdd885b5 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu)Automated smoke report for 5.12.2 patch dd885b5817deb1a8363f3336897bc364bcf=
2882b v5.12.2-2-gdd885b5
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using bcc32 version 5.5.1
smoketime 6 hours 45 minutes (average 40 minutes 34 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D...
Problem installing ASE 12.5.2 (FREE edition) on Fedora Core 2When I'm trying to install ASE 12.5.2 Free Edition on Fedora Core 2, I
receive this error:
Building Adaptive Server 'ORION':
Writing entry into directory services...
Directory services entry complete.
Building master device...
Master device complete.
Writing RUN_ORION file...
RUN_ORION file complete.
Starting server...
Server started.
Building sysprocs device and sybsystemprocs database...
sybprocs device and sybsystemprocs database created.
Running installmaster script to install system stored procedures...
Task failed
Open Client message: 'ct_send(): network...
Smoke [5.12.2] v5.12.2-4-g6b6803c FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu) #2Automated smoke report for 5.12.2 patch 6b6803ca5cc042a20bd63333defdcf9b4b5=
a045c v5.12.2-4-g6b6803c
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using bcc32 version 5.5.1
smoketime 6 hours 54 minutes (average 41 minutes 26 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D...
Smoke [5.12.2] v5.12.2-3-g4ffae9c FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu) #2Automated smoke report for 5.12.2 patch 4ffae9cec64e9dd4150c249b8d63bdceb4e=
65fb2 v5.12.2-3-g4ffae9c
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using cl version 13.10.3077
smoketime 6 hours 31 minutes (average 39 minutes 12 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =...
Smoke [5.12.2] v5.12.2-RC1-2-g1728fe3 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu)Automated smoke report for 5.12.2 patch 1728fe3709563d2544d110e15567e2ff15f=
340a5 v5.12.2-RC1-2-g1728fe3
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using cl version 12.00.8804
smoketime 6 hours 50 minutes (average 41 minutes 4 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, ...
Smoke [5.12.2] v5.12.2-5-g60a58e9 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu) #2Automated smoke report for 5.12.2 patch 60a58e98bf9da0f7e06e47974d829b42b2c=
c834e v5.12.2-5-g60a58e9
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using cl version 12.00.8804
smoketime 6 hours 29 minutes (average 38 minutes 56 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =...
Smoke [5.12.2] v5.12.2-4-g6b6803c FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu) #2Automated smoke report for 5.12.2 patch 6b6803ca5cc042a20bd63333defdcf9b4b5=
a045c v5.12.2-4-g6b6803c
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using bcc32 version 5.5.1
smoketime 6 hours 53 minutes (average 41 minutes 23 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D...
Smoke [5.12.2] v5.12.2-40-g05571b7 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu) #2Automated smoke report for 5.12.2 patch 05571b730ab4be3bed6df4217c897bbadde=
bc6b3 v5.12.2-40-g05571b7
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using cl version 15.00.30729.01
smoketime 6 hours 49 minutes (average 40 minutes 55 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure...
Smoke [5.12.2] v5.12.2-RC1-1-g28e61b3 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu) #2Automated smoke report for 5.12.2 patch 28e61b373366f2434addc3fad22d10a27e9=
c1b0c v5.12.2-RC1-1-g28e61b3
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using cl version 15.00.30729.01
smoketime 7 hours 6 minutes (average 42 minutes 41 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configu...
Smoke [5.12.2] v5.12.2 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu)Automated smoke report for 5.12.2 patch 7a3b65c9d99f69553fffe01f73d49fe9abf=
95120 v5.12.2
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz=
) (x86/2 cpu)
on MSWin32 - WinXP/.Net SP3
using cl version 12.00.8804
smoketime 7 hours 4 minutes (average 42 minutes 29 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =...
12.2.11: still shows 12.2.9I just installed Version 12.2.11 (XE2) but in the stand alone server it stays 12.2.9.
In the IDE The IWServerControler shows the right version.
Do I need to worry or is it just the wrong label?
J.
> {quote:title=Joe B. wrote:}{quote}
> I just installed Version 12.2.11 (XE2) but in the stand alone server it stays 12.2.9.
> In the IDE The IWServerControler shows the right version.
> Do I need to worry or is it just the wrong label?
>
> J.
Hi Joe,
You are probably linking with old DCU files. 12.2.11 really shows 12.2.11 in SA server window, I'm positive. P...