[PATCH 1/3] buildperl.pl: add patches to support gcc 3.x and 4.x when compiling Perl 5.6.x

---
 cpan/Devel-PPPort/devel/buildperl.pl |  144 ++++++++++++++++++++++++++++++++++
 1 files changed, 144 insertions(+), 0 deletions(-)

diff --git a/cpan/Devel-PPPort/devel/buildperl.pl b/cpan/Devel-PPPort/devel/buildperl.pl
index 49b7fbb..529c999 100644
--- a/cpan/Devel-PPPort/devel/buildperl.pl
+++ b/cpan/Devel-PPPort/devel/buildperl.pl
@@ -132,6 +132,32 @@ my @patch = (
               [ \&patch_sysv ],
             ],
   },
+  {
+    perl => [
+              '5.6.0',
+            ],
+    subs => [
+              [ \&patch_gcc_56 ],
+              [ \&patch_gcc_560 ],
+            ],
+  },
+  {
+    perl => [
+              '5.6.1',
+            ],
+    subs => [
+              [ \&patch_gcc_56 ],
+              [ \&patch_gcc_561 ],
+            ],
+  },
+  {
+    perl => [
+              '5.6.2',
+            ],
+    subs => [
+              [ \&patch_gcc_562 ],
+            ],
+  },
 );
 
 my(%perl, @perls);
@@ -425,6 +451,124 @@ END
   }
 }
 
+sub patch_gcc_56
+{
+  patch(<<'END');
+--- Configure
++++ Configure
+@@ -3380,6 +3380,18 @@
+ test "X$gfpthkeep" != Xy && gfpth=""
+ EOSC
+ 
++# gcc 3.1 complains about adding -Idirectories that it already knows about,
++# so we will take those off from locincpth.
++case "$gccversion" in
++3*)
++    echo "main(){}">try.c
++    for incdir in `$cc -v -c try.c 2>&1 | \
++       sed '1,/^#include <\.\.\.>/d;/^End of search list/,$d;s/^ //'` ; do
++       locincpth=`echo $locincpth | sed s!$incdir!!`
++    done
++    $rm -f try try.*
++esac
++
+ : What should the include directory be ?
+ echo " "
+ $echo $n "Hmm...  $c"
+
+--- makedepend.SH
++++ makedepend.SH
+@@ -58,6 +58,10 @@ case $PERL_CONFIG_SH in
+ 	;;
+ esac
+ 
++# Avoid localized gcc/cc messages
++LC_ALL=C
++export LC_ALL
++
+ # We need .. when we are in the x2p directory if we are using the
+ # cppstdin wrapper script.
+ # Put .. and . first so that we pick up the present cppstdin, not
+@@ -122,7 +122,7 @@ for file in `$cat .clist`; do
+     *.y) filebase=`basename $file .y` ;;
+     esac
+     case "$file" in
+-    */*) finc="-I`echo $file | sed 's#/[^/]*$##`" ;;
++    */*) finc="-I`echo $file | sed 's#/[^/]*$##'`" ;;
+     *)   finc= ;;
+     esac
+     $echo "Finding dependencies for $filebase$_o."
+END
+}
+
+sub patch_gcc_560
+{
+  patch(<<'END');
+--- makedepend.SH
++++ makedepend.SH
+@@ -136,6 +141,11 @@ for file in `$cat .clist`; do
+     $sed \
+ 	-e '1d' \
+ 	-e '/^#.*<stdin>/d' \
++	-e '/^#.*<builtin>/d' \
++	-e '/^#.*<built-in>/d' \
++	-e '/^#.*<command line>/d' \
++	-e '/^#.*<command-line>/d' \
+ 	-e '/^#.*"-"/d' \
++	-e '/^#.*"\/.*\/"/d' \
+ 	-e 's#\.[0-9][0-9]*\.c#'"$file.c#" \
+ 	-e 's/^[	 ]*#[	 ]*line/#/' \
+END
+}
+
+sub patch_gcc_561
+{
+  patch(<<'END');
+--- makedepend.SH
++++ makedepend.SH
+@@ -159,7 +159,12 @@
+         $sed \
+ 	    -e '1d' \
+ 	    -e '/^#.*<stdin>/d' \
++	    -e '/^#.*<builtin>/d' \
++	    -e '/^#.*<built-in>/d' \
++	    -e '/^#.*<command line>/d' \
++	    -e '/^#.*<command-line>/d' \
+ 	    -e '/^#.*"-"/d' \
++	    -e '/^#.*"\/.*\/"/d' \
+ 	    -e 's#\.[0-9][0-9]*\.c#'"$file.c#" \
+ 	    -e 's/^[	 ]*#[	 ]*line/#/' \
+ 	    -e '/^# *[0-9][0-9]* *[".\/]/!d' \
+END
+}
+
+sub patch_gcc_562
+{
+  patch(<<'END');
+--- makedepend.SH
++++ makedepend.SH
+@@ -126,7 +126,7 @@ for file in `$cat .clist`; do
+     *.y) filebase=`basename $file .y` ;;
+     esac
+     case "$file" in
+-    */*) finc="-I`echo $file | sed 's#/[^/]*$##`" ;;
++    */*) finc="-I`echo $file | sed 's#/[^/]*$##'`" ;;
+     *)   finc= ;;
+     esac
+     $echo "Finding dependencies for $filebase$_o."
+@@ -163,7 +163,9 @@
+ 	    -e '/^#.*<builtin>/d' \
+ 	    -e '/^#.*<built-in>/d' \
+ 	    -e '/^#.*<command line>/d' \
++	    -e '/^#.*<command-line>/d' \
+ 	    -e '/^#.*"-"/d' \
++	    -e '/^#.*"\/.*\/"/d' \
+ 	    -e 's#\.[0-9][0-9]*\.c#'"$file.c#" \
+ 	    -e 's/^[	 ]*#[	 ]*line/#/' \
+ 	    -e '/^# *[0-9][0-9]* *[".\/]/!d' \
+END
+}
+
 sub patch
 {
   my($patch) = @_;
-- 
1.6.0.3.517.g759a

0
book
10/29/2009 8:19:33 PM
perl.perl5.porters 48287 articles. 1 followers. Follow

11 Replies
953 Views

Similar Articles

[PageSpeed] 1
Get it on Google Play
Get it on Apple App Store

---
 cpan/Devel-PPPort/devel/buildperl.pl |   63 ++++++++++++++++++++++++++++++++++
 1 files changed, 63 insertions(+), 0 deletions(-)

diff --git a/cpan/Devel-PPPort/devel/buildperl.pl b/cpan/Devel-PPPort/devel/buildperl.pl
index 529c999..c0fbfa8 100644
--- a/cpan/Devel-PPPort/devel/buildperl.pl
+++ b/cpan/Devel-PPPort/devel/buildperl.pl
@@ -158,6 +158,23 @@ my @patch = (
               [ \&patch_gcc_562 ],
             ],
   },
+  {
+    perl => [
+              '5.8.0',
+            ],
+    subs => [
+              [ \&patch_gcc_580 ],
+              [ \&patch_gcc_58x ],
+            ],
+  },
+  {
+    perl => [
+              qr/^5.8.[1-8]/
+            ],
+    subs => [
+              [ \&patch_gcc_58x ],
+            ],
+  },
 );
 
 my(%perl, @perls);
@@ -569,6 +586,52 @@ sub patch_gcc_562
 END
 }
 
+sub patch_gcc_580
+{
+  patch(<<'END');
+--- makedepend.SH
++++ makedepend.SH
+@@ -58,6 +58,11 @@ case $PERL_CONFIG_SH in
+ 	;;
+ esac
+ 
++# Avoid localized gcc messages
++case "$ccname" in
++    gcc) LC_ALL=C ; export LC_ALL ;;
++esac
++
+ # We need .. when we are in the x2p directory if we are using the
+ # cppstdin wrapper script.
+ # Put .. and . first so that we pick up the present cppstdin, not
+END
+}
+
+sub patch_gcc_58x {
+  patch(<<'END');
+--- makedepend.SH
++++ makedepend.SH
+@@ -128,7 +127,7 @@ for file in `$cat .clist`; do
+     *.y) filebase=`basename $file .y` ;;
+     esac
+     case "$file" in
+-    */*) finc="-I`echo $file | sed 's#/[^/]*$##`" ;;
++    */*) finc="-I`echo $file | sed 's#/[^/]*$##'`" ;;
+     *)   finc= ;;
+     esac
+     $echo "Finding dependencies for $filebase$_o."
+@@ -167,7 +166,9 @@ for file in `$cat .clist`; do
+             -e '/^#.*<builtin>/d' \
+             -e '/^#.*<built-in>/d' \
+             -e '/^#.*<command line>/d' \
++            -e '/^#.*<command-line>/d' \
+ 	    -e '/^#.*"-"/d' \
++	    -e '/^#.*"\/.*\/"/d' \
+ 	    -e '/: file path prefix .* never used$/d' \
+ 	    -e 's#\.[0-9][0-9]*\.c#'"$file.c#" \
+ 	    -e 's/^[	 ]*#[	 ]*line/#/' \
+END
+}
+
 sub patch
 {
   my($patch) = @_;
-- 
1.6.0.3.517.g759a

0
book
10/29/2009 8:19:34 PM
---
 cpan/Devel-PPPort/devel/buildperl.pl |   56 ++++++++++++++++++++++++++++++++++
 1 files changed, 56 insertions(+), 0 deletions(-)

diff --git a/cpan/Devel-PPPort/devel/buildperl.pl b/cpan/Devel-PPPort/devel/buildperl.pl
index c0fbfa8..ca652d2 100644
--- a/cpan/Devel-PPPort/devel/buildperl.pl
+++ b/cpan/Devel-PPPort/devel/buildperl.pl
@@ -175,6 +175,23 @@ my @patch = (
               [ \&patch_gcc_58x ],
             ],
   },
+  {
+    perl => [
+              qr/^5.9.[0-3]/
+            ],
+    subs => [
+              [ \&patch_gcc_59x ],
+              [ \&patch_gcc_594 ],
+            ],
+  },
+  {
+    perl => [
+              '5.9.4'
+            ],
+    subs => [
+              [ \&patch_gcc_594 ],
+            ],
+  },
 );
 
 my(%perl, @perls);
@@ -632,6 +649,45 @@ sub patch_gcc_58x {
 END
 }
 
+sub patch_gcc_59x {
+  patch(<<'END');
+--- makedepend.SH
++++ makedepend.SH
+@@ -167,6 +167,7 @@ for file in `$cat .clist`; do
+             -e '/^#.*<builtin>/d' \
+             -e '/^#.*<built-in>/d' \
+             -e '/^#.*<command line>/d' \
++            -e '/^#.*<command-line>/d' \
+ 	    -e '/^#.*"-"/d' \
+ 	    -e '/: file path prefix .* never used$/d' \
+ 	    -e 's#\.[0-9][0-9]*\.c#'"$file.c#" \
+END
+}
+
+sub patch_gcc_594 {
+  patch(<<'END');
+--- makedepend.SH
++++ makedepend.SH
+@@ -128,7 +128,7 @@ for file in `$cat .clist`; do
+     *.y) filebase=`basename $file .y` ;;
+     esac
+     case "$file" in
+-    */*) finc="-I`echo $file | sed 's#/[^/]*$##`" ;;
++    */*) finc="-I`echo $file | sed 's#/[^/]*$##'`" ;;
+     *)   finc= ;;
+     esac
+     $echo "Finding dependencies for $filebase$_o."
+@@ -169,6 +169,7 @@ for file in `$cat .clist`; do
+             -e '/^#.*<command line>/d' \
+             -e '/^#.*<command-line>/d' \
+ 	    -e '/^#.*"-"/d' \
++	    -e '/^#.*"\/.*\/"/d' \
+ 	    -e '/: file path prefix .* never used$/d' \
+ 	    -e 's#\.[0-9][0-9]*\.c#'"$file.c#" \
+ 	    -e 's/^[	 ]*#[	 ]*line/#/' \
+END
+}
+
 sub patch
 {
   my($patch) = @_;
-- 
1.6.0.3.517.g759a

0
book
10/29/2009 8:19:35 PM
On Thu, Oct 29, 2009 at 09:19:33PM +0100, Philippe Bruhat (BooK) wrote:
> ---
>  cpan/Devel-PPPort/devel/buildperl.pl |  144 ++++++++++++++++++++++++++++++++++
>  1 files changed, 144 insertions(+), 0 deletions(-)
> 

Sorry, next time I'll use the --compose option.

This series of patches adds, er, patches to buildperl.pl, which is part
of Devel::PPPort. It "fixes" Configure and makedepend.SH so that older
perls can be compiled in "modern" environments (gcc 3.x, 4.x).

The patches themselves are a set of minimal changes
that made the make && make install complete on my Ubuntu box.

The patches themselves were obtained by using git diff against the latest
tag that "worked" (typically perl-5.8.9 and perl-5.9.5).

Boring details: http://use.perl.org/~BooK/journal/39818

-- 
 Philippe Bruhat (BooK)

 When you allow legends to rule your life, your world is based on fiction.
                                    (Moral from Groo The Wanderer #99 (Epic))
0
philippe
10/29/2009 8:44:58 PM


On Thu, Oct 29, 2009 at 09:44:58PM +0100, Philippe Bruhat (BooK) wrote:
> On Thu, Oct 29, 2009 at 09:19:33PM +0100, Philippe Bruhat (BooK) wrote:
> > ---
> >  cpan/Devel-PPPort/devel/buildperl.pl |  144 ++++++++++++++++++++++++++++++++++
> >  1 files changed, 144 insertions(+), 0 deletions(-)
> > 
> 
> Sorry, next time I'll use the --compose option.
 
(Just for the future, since Devel::PPPort is dual-life with upstream of
CPAN, we can't take patches until upstream incorporates them. And even
then, we should only be incorporating a new CPAN release.)


-j

0
jesse
11/2/2009 5:16:47 PM
--Sig_/IcMUavuPoT.XAPsogBk0/pQ
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

Hi Philippe,

On 2009-10-29, at 21:44:58 +0100, Philippe Bruhat (BooK) wrote:

> On Thu, Oct 29, 2009 at 09:19:33PM +0100, Philippe Bruhat (BooK) wrote:
> > ---
> >  cpan/Devel-PPPort/devel/buildperl.pl |  144 ++++++++++++++++++++++++++=
++++++++
> >  1 files changed, 144 insertions(+), 0 deletions(-)
> >=20
>=20
> Sorry, next time I'll use the --compose option.
>=20
> This series of patches adds, er, patches to buildperl.pl, which is part
> of Devel::PPPort. It "fixes" Configure and makedepend.SH so that older
> perls can be compiled in "modern" environments (gcc 3.x, 4.x).
>=20
> The patches themselves are a set of minimal changes
> that made the make && make install complete on my Ubuntu box.
>=20
> The patches themselves were obtained by using git diff against the latest
> tag that "worked" (typically perl-5.8.9 and perl-5.9.5).
>=20
> Boring details: http://use.perl.org/~BooK/journal/39818

sorry for the delay.

I've just applied your patches and after having a look at your
journal I trust you that the patches just work. ;)

Note that there was already some logic in buildperl.pl to handle
parts of that <command-line> / <built-in> problem by actually
patching the makefiles after Configure. While this is certainly
not as clean as patching makedepend.SH, it avoids shipping lots
patches for all different versions of makedepend.SH.

Shall I wait for more patches?

Cheers,
Marcus

--=20
Kime's Law for the Reward of Meekness:
	Turning the other cheek merely ensures two bruised cheeks.

--Sig_/IcMUavuPoT.XAPsogBk0/pQ
Content-Type: application/pgp-signature; name=signature.asc
Content-Disposition: attachment; filename=signature.asc

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.11 (GNU/Linux)

iEYEARECAAYFAkrvRXgACgkQ+WHr1iaAu0ZYhQCfaq1qk0/ciaN+RTIu28VVZ47L
5dQAoKDYc/RzzhSBzAHViqwmUp3giFiw
=FS3Q
-----END PGP SIGNATURE-----

--Sig_/IcMUavuPoT.XAPsogBk0/pQ--
0
mhx
11/2/2009 8:47:45 PM
On Mon, Nov 02, 2009 at 09:47:45PM +0100, Marcus Holland-Moritz wrote:
> 
> > Boring details: http://use.perl.org/~BooK/journal/39818
> 
> sorry for the delay.
> 
> I've just applied your patches and after having a look at your
> journal I trust you that the patches just work. ;)

They do. At least on my Linux box.

> Note that there was already some logic in buildperl.pl to handle
> parts of that <command-line> / <built-in> problem by actually
> patching the makefiles after Configure.

Ooh. I must admit I don't remember trying to run buildperl.pl without
the modifications. So maybe my patches are obsolete?

Maybe I should run my whole test script again, just to check that it
works without my patches? Or that some of the patches can be removed?

> While this is certainly
> not as clean as patching makedepend.SH, it avoids shipping lots
> patches for all different versions of makedepend.SH.

Yes, I was a bit bothered that I had to had so many routines to patch
the same file over and over again. In my recent changes, I have tried to
split the makedepend.SH patches so that I could use them more than once.

> Shall I wait for more patches?

Since the journal, I wrote patches for Perl 5.5.x, which I can send in.

-- 
 Philippe Bruhat (BooK)

 There is no solution to a problem of sheer greed.
                                    (Moral from Groo The Wanderer #94 (Epic))
0
philippe
11/2/2009 9:30:20 PM
On Mon, Nov 02, 2009 at 12:16:47PM -0500, jesse wrote:
> 
> (Just for the future, since Devel::PPPort is dual-life with upstream of
> CPAN, we can't take patches until upstream incorporates them. And even
> then, we should only be incorporating a new CPAN release.)
> 

Yes I know. But I was so excited to actually have a non-doc patch I
could send to p5p, that I just sent it. :-)

-- 
 Philippe Bruhat (BooK)

 True friends are friends to the end... and even after that.
                                    (Moral from Groo The Wanderer #53 (Epic))
0
philippe
11/2/2009 9:31:29 PM
--Sig_/DzDGJzYEFTJCt/miW/2j2VO
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

Hi Philippe,

On 2009-11-02, at 22:30:20 +0100, Philippe Bruhat (BooK) wrote:

> On Mon, Nov 02, 2009 at 09:47:45PM +0100, Marcus Holland-Moritz wrote:
> >=20
> > > Boring details: http://use.perl.org/~BooK/journal/39818
> >=20
> > sorry for the delay.
> >=20
> > I've just applied your patches and after having a look at your
> > journal I trust you that the patches just work. ;)
>=20
> They do. At least on my Linux box.
>=20
> > Note that there was already some logic in buildperl.pl to handle
> > parts of that <command-line> / <built-in> problem by actually
> > patching the makefiles after Configure.
>=20
> Ooh. I must admit I don't remember trying to run buildperl.pl without
> the modifications. So maybe my patches are obsolete?
>=20
> Maybe I should run my whole test script again, just to check that it
> works without my patches? Or that some of the patches can be removed?

It would be nice if you could test without. I *think* your patches
that fix the quoting issue have to be applied anyway. But the
<command-line> / <built-in> stuff can probably be addressed in
build_and_install() by adding more cases to the sed call.

> > While this is certainly
> > not as clean as patching makedepend.SH, it avoids shipping lots
> > patches for all different versions of makedepend.SH.
>=20
> Yes, I was a bit bothered that I had to had so many routines to patch
> the same file over and over again. In my recent changes, I have tried to
> split the makedepend.SH patches so that I could use them more than once.
>=20
> > Shall I wait for more patches?
>=20
> Since the journal, I wrote patches for Perl 5.5.x, which I can send in.

Yes, feel free to send :)

I can't promise to make a new release very soon, though.

Cheers,
Marcus

--Sig_/DzDGJzYEFTJCt/miW/2j2VO
Content-Type: application/pgp-signature; name=signature.asc
Content-Disposition: attachment; filename=signature.asc

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.11 (GNU/Linux)

iEYEARECAAYFAkrvUfEACgkQ+WHr1iaAu0YPLwCfUhyEC5Sb4E9WRsBeIhPDMdMw
TjgAni5qfZNB2VSFE9oP6vQJbrD4xRDb
=l3cd
-----END PGP SIGNATURE-----

--Sig_/DzDGJzYEFTJCt/miW/2j2VO--
0
mhx
11/2/2009 9:41:05 PM
On Mon, Nov 02, 2009 at 10:41:05PM +0100, Marcus Holland-Moritz wrote:
> > 
> > > Note that there was already some logic in buildperl.pl to handle
> > > parts of that <command-line> / <built-in> problem by actually
> > > patching the makefiles after Configure.
> > 
> > Ooh. I must admit I don't remember trying to run buildperl.pl without
> > the modifications. So maybe my patches are obsolete?
> > 
> > Maybe I should run my whole test script again, just to check that it
> > works without my patches? Or that some of the patches can be removed?
> 
> It would be nice if you could test without.

I just did. None of the following compiles:

> I *think* your patches
> that fix the quoting issue have to be applied anyway.

Indeed, the error I see is usually:

    ./makedepend: 1: Syntax error: Unterminated quoted string

> But the
> <command-line> / <built-in> stuff can probably be addressed in
> build_and_install() by adding more cases to the sed call.

OK. So I'll refine my changes by adding the quoting patch and ensuring
the sed call does everything that's needed.

Should I send a patch against blead, or against the latest release on
CPAN or against some other repository?

-- 
 Philippe Bruhat (BooK)

 When it is time for voting-      /     In the West or in the East-
 Why must we always settle for-   /     The man we hate the least?
                                (Intro poem to Groo The Wanderer #108 (Epic))
0
philippe
11/2/2009 10:26:24 PM
--Sig_/gFoMq.CJUQSp7N87Ra0tIGt
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

Hi Philippe,

On 2009-11-02, at 23:26:24 +0100, Philippe Bruhat (BooK) wrote:

> On Mon, Nov 02, 2009 at 10:41:05PM +0100, Marcus Holland-Moritz wrote:
> > >=20
> > > > Note that there was already some logic in buildperl.pl to handle
> > > > parts of that <command-line> / <built-in> problem by actually
> > > > patching the makefiles after Configure.
> > >=20
> > > Ooh. I must admit I don't remember trying to run buildperl.pl without
> > > the modifications. So maybe my patches are obsolete?
> > >=20
> > > Maybe I should run my whole test script again, just to check that it
> > > works without my patches? Or that some of the patches can be removed?
> >=20
> > It would be nice if you could test without.
>=20
> I just did. None of the following compiles:
>=20
> > I *think* your patches
> > that fix the quoting issue have to be applied anyway.
>=20
> Indeed, the error I see is usually:
>=20
>     ./makedepend: 1: Syntax error: Unterminated quoted string
>=20
> > But the
> > <command-line> / <built-in> stuff can probably be addressed in
> > build_and_install() by adding more cases to the sed call.
>=20
> OK. So I'll refine my changes by adding the quoting patch and ensuring
> the sed call does everything that's needed.

Very good, thanks! :)

> Should I send a patch against blead, or against the latest release on
> CPAN or against some other repository?

Blead and CPAN should be identical, so either one is fine.

Cheers,
Marcus

--=20
Peace, n.:
	In international affairs, a period of cheating between two
	periods of fighting.
		-- Ambrose Bierce, "The Devil's Dictionary"

--Sig_/gFoMq.CJUQSp7N87Ra0tIGt
Content-Type: application/pgp-signature; name=signature.asc
Content-Disposition: attachment; filename=signature.asc

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.11 (GNU/Linux)

iEUEARECAAYFAkrvXWkACgkQ+WHr1iaAu0ZqsQCdE1ZrTM+m5P2OnAUivlzLNfRv
Yk0Al1tEihcsoVRt/KvDTfa1mAMzGuY=
=+N9q
-----END PGP SIGNATURE-----

--Sig_/gFoMq.CJUQSp7N87Ra0tIGt--
0
mhx
11/2/2009 10:29:55 PM
On Mon, Nov 02, 2009 at 11:26:24PM +0100, Philippe Bruhat (BooK) wrote:
> > 
> > It would be nice if you could test without.
> 
> I just did. None of the following compiles:

Oops. I sent the email before the end of my script...

Anyway, as expected, none of the following compiles with the buildperl.pl
on blead:
5.005 5.005_01 5.005_02 5.005_03 5.005_04 5.6.0 5.6.1 5.6.2 5.8.0 5.8.1
5.8.2 5.8.3 5.8.4 5.8.5 5.8.6 5.8.7 5.8.8 5.9.0 5.9.1 5.9.2 5.9.3 5.9.4

-- 
 Philippe Bruhat (BooK)

 In war, the only winners are those who sell the weapons.
                                                 (Moral from Groo #3 (Image))
0
philippe
11/2/2009 10:37:25 PM
Reply:

Similar Artilces:

EAS 3.6.1 with jdk 1.3.x/1.4.x
Hi, Experts ! Has anyone tried using JDK 1.3.x/JDK 1.4.x with EAS 3.6.1( C5 )? If so, have you found any problems. etc... Can you share your experience? I am interested in using it and see with better JVM and JVM options what difference will it make in performance. I may NOT care about 'certified for JDK 1.x.'only. Thanks Hemant NB: We have EAS 4.1.3, but our components ( CORBA components ) were developed using OLD powerJ( 3.5/3.6.1) version.When I use PowerJ 4.1 to deploy Jaguar components, it fails after compilation stating that it is not an EJB component. Techni...

Can individual websites be migrated (3.x to 3.x or 3.x to 4.x)?
I see the means to export a template of a website, but would like to export the entire website including content and if possible security settings including the User membership associated with that site. Any tools available anyone knows of? I found a tool on snowcovered for migrating only Users although I'm not sure if it's specific to a website or the entire Membership database for the entire installation instance. TIA, Tony...

(mozilla 1.3.1 or 1.4) x (flash 5 and 6) x (windows 98)
Subject line pretty much says it all. In all four situations, I get consistent crashes when I got to www.ebay.com or www.nasa.gov. By crash I mean that browser just freezes up, and never comes back. The talkback agent appears to be killed also. Anyone else have this problem with those sites? ...

Load 11.5.1 dump (AIX 4.x) to 12.5.3 server (AIX 5.x)
Hi, I've been tasked with loading data from an old 11.5.1 server to a more up-to-date server. Trying to load the first sample db dump that I've been given results in: [110] DBA_SQL.master.1> load database testing from "/pdata/sybase/backup/fsb_050619"; Backup Server session id is: 58. Use this value when executing the 'sp_volchanged' system stored procedure after fulfilling any volume change request from the Backup Server. Backup Server: 6.28.1.1: Dumpfile name 'fsb0517014CD0 ' section number 1 mounted on disk file '...

Dynamic background KDE 3.5.x/4.x.x
Hi all, I want to know how can i set/have a dynamic wallpaper (with smooth transitions) on KDE like the ones bundled with Mandriva 2008? Using OpenSuse 11.0 x64_86 - KDE 4.2 Beta 2 / 3.5.9 -(I thought about using 4 wallpapers with a timer of 6hours, but there won't be smooth transitions, and also background won't change at 100% depending the time of the day).- -- hotus ------------------------------------------------------------------------ HI HOTUS, I HAVE THE SAME QUESTION. IF YOU'RE INTERESTED, CHECK OUT MY REPLY TO HAVOC65. BYE, MARK ...

FF 3.0.5 is OK; FF 3.1.x & 3.2.x keep crashing
I just discovered FF 3.0.5, FireFox-3.1b3pre.en-US.os2.zip and Firefox-3.2a1pre.en-US.os2.zip and wanted to give them a try. While 3.0.5 at first glance continues to work fine, the latter 2 keep crashing here (even with new profile) shortly after the browser window comes up with: Killed by SIGILL pid=0x022f ppid=0x0022 tid=0x0001 slot=0x0094 pri=0x0200 mc=0x0001 N:\MOZILLA-TEST\FF3.X\FIREFOX.EXE LIBC063 ffffffff:ffffffff cs:eip=005b:200c3e80 ss:esp=0053:0011cfb8 ebp=0011f570 ds=0053 es=0053 fs=150b gs=0000 efl=00212246 eax=0011d564 ebx=20911d00 ecx=...

enigmail-1.0.1 for TB-3.0.x and enigmail-1.1.2 for TB-3.1.x available
Hi, enigmail-1.0.1 (TB-3.0.x) and enigmail-1.1.2 (TB-3.1.x) are available at http://enigmail.mozdev.org. Note for Seamonkey-2.0.x you can download and install enigmail-1.0.1. Have fun, Walter ...

superreview requested: [Bug 273624] NSS_Initialize diagnostics aren't sufficiently precise; regression from 3.3.x to 3.9.x : [Attachment 168361] Bob's proposed patch
Wan-Teh Chang <wtchang@gmail.com> has asked Nelson Bolyard <nelson@bolyard.com> for superreview: Bug 273624: NSS_Initialize diagnostics aren't sufficiently precise; regression from 3.3.x to 3.9.x https://bugzilla.mozilla.org/show_bug.cgi?id=273624 Attachment 168361: Bob's proposed patch https://bugzilla.mozilla.org/attachment.cgi?id=168361&action=edit ------- Additional Comments from Wan-Teh Chang <wtchang@gmail.com> Using 'dbtest', I verified that this patch makes the softoken's C_Initialize return the right CKR value if either cert8.db ...

superreview granted: [Bug 273624] NSS_Initialize diagnostics aren't sufficiently precise; regression from 3.3.x to 3.9.x : [Attachment 168361] Bob's proposed patch
Robert Relyea <rrelyea@redhat.com> has granted Nelson Bolyard <nelson@bolyard.com>'s request for superreview: Bug 273624: NSS_Initialize diagnostics aren't sufficiently precise; regression from 3.3.x to 3.9.x https://bugzilla.mozilla.org/show_bug.cgi?id=273624 Attachment 168361: Bob's proposed patch https://bugzilla.mozilla.org/attachment.cgi?id=168361&action=edit ------- Additional Comments from Robert Relyea <rrelyea@redhat.com> sr=relyea ...

superreview requested: [Bug 273624] NSS_Initialize diagnostics aren't sufficiently precise; regression from 3.3.x to 3.9.x : [Attachment 168361] Bob's proposed patch #2
Nelson Bolyard <nelson@bolyard.com> has asked Robert Relyea <rrelyea@redhat.com> for superreview: Bug 273624: NSS_Initialize diagnostics aren't sufficiently precise; regression from 3.3.x to 3.9.x https://bugzilla.mozilla.org/show_bug.cgi?id=273624 Attachment 168361: Bob's proposed patch https://bugzilla.mozilla.org/attachment.cgi?id=168361&action=edit ------- Additional Comments from Nelson Bolyard <nelson@bolyard.com> Basec on feedback from Andreas Sterbenz of Sun, (Thanks!, Andreas), I'm giving this bug r+, and passing the sr reuqest on to Bob ...

selecting ? selecting of 1., 2. , 3., 4., 5., 6. is slow (1-3 second) then selecting of 7.,8.,9. go on is so fast (0.1 second or more fast).. how can i get fast for selecting of 1., 2. , 3., 4., 5., 6
hello friends selecting of 1., 2. , 3., 4.(sometime even 5., 6.) is slow (1-3 second) then selecting of 7.,8.,9.(sometimes 5., 6.,) go on is so fast (0.1 second or more fast).. how can i get fast for selecting of 1., 2. , 3., 4., 5., 6. is slow ?? recordcount is almost 1.050.000.. i do selecting 1.2.3. go on same page with treeview1.. treeview1 in masterpage.master.. gridview1 and datasource1 are in pagelist.aspx (it connets datasource1)..productnumber is primarykey for index.. kategori, kategori1 and kategori2, price, datemin are index from keys/index in table1 (right clicking menu)....

Information regarding NSS versions 3.16.2.x, 3.16.x, 3.17.x
This message is to clarify the status of the latest NSS releases. We'll shortly announce NSS 3.16.2.3 The motivation is to support the Firefox 31.x extended support release (ESR) branch. The NSS 3.16.2.x releases still contain the set of root CA certificates used by Firefox 31 ESR. NSS 3.16.3 and newer contain an updated list of root CA certificates with several legacy roots removed. Users of NSS 3.16.3/4/5/6 should upgrade to the latest NSS 3.17.x release. Kai ...

Undocumented fix in Active Directory driver version 3.5.14 Patch 8 or 3.6.1 Remote Loader patch 3
Just in case anyone else experiences the same problem. We resolved an issue at a client yesterday where some password change events from AD were discarded and never sent to the engine. The resolution was to update to AD 3.5.14 Patch 8 and IDM 3.6.1 Remote Loader patch 3 The environment was previously running IDM 3.6.1 Active Directory Driver Patch 4 and IDM 3.6.1 Remote Loader patch 2. The domain controller was Windows 2008r2 A powershell script was used to mass set pre-determined passwords on approx 2000 AD users that had been provisioned previously by IDM. A level 5 ...

Found All IP from x.x.x.1 to x.x.x.256
 For example i need: 123.123.123.1123.123.123.2....123.123.123.256-------------------------------------------I write code: 1 String IPadresas = Request.UserHostAddress; //Found visitor IP2 for (int i = 0; i < IPadresas.Length; i++)3 {4 IPad_cut[i] = IPadresas[i];5 if (IPad_cut[i] == '.') { dotCOUNT++; }6 if (dotCOUNT == limit) { break; }7 saveLong = i;8 }9 saveLong = saveLong + 2;10 Char[] IPad_cut2 = new Char[saveLong]; //New Char, cut IP address 11 ...

ANN: X-DBGrid Component 5.3 and X-Files Components 5.3 has been released!
Dear Developers, I'm pleased to announce the new version of X-DBGrid Component 5.3 and X-Files Components 5.3 has been released. What's new in version 5.3 ? ====================== - Support for new StyleElements property introduced in RAD Studio XE3 - New StyleElements property introduced and supported also in RAD Studio XE2 - New SystemStyleElements property for Windows >= Vista (RAD Studio XE2, XE3) - New IsSystemStyle function to detect new System Style (RAD Studio XE2, XE3) - Improved drawing of fixed and/or selected cells in TXDBGrid (System...

Web resources about - [PATCH 1/3] buildperl.pl: add patches to support gcc 3.x and 4.x when compiling Perl 5.6.x - perl.perl5.porters

Resources last updated: 1/11/2016 11:27:57 PM