To install or not to install?
What's the difference between installing qpsmtpd as in...=0A=0Aperl Makefil=
e.PL=0Amake=0Amake test=0Amake install=0Amake clean=0A=0A... or running it =
directly from /home/smtpd/qpsmtpd?=0A=0APresently I'm running ./qpsmtpd fro=
m xinetd, so the installed copy is probably wasted, right?=0A=0AIs there an=
y benefit/downside in running an installed copy, and how would I do that?=
There is no benefit to installing. I've been running under xinetd for
a couple of years, directly from an svn checkout in /var/qpsmtpd. In
fact, I dont even make changes ...How to include 2 installers(msi) in one installer(msi)?
I have made two installers for two different applications ie. msi
files. Now I want to make a single .msi file which installs
these two applications.
Any help is appreciated. Regards Regards,N@vEeD Kh@N
You can create a master MSI then executes the 2 other MSIs.
Currently I am doing the way you suggested. It will install the things.But how the uninstall will performed.If the user uninstall the mater Setup then it should uninstall the child installers too.How this will work? Regards,N@vEeD Kh@N
here is a Good Articlehttp://www.codeproject.com/KB/cs/Ins...If you had to install a Windows fileserver would you install AD on it, too or would you let it work in a DSFW domain as member server?
Unfortunately our main business application has a big performance boost
if run against a Windows 2008R2 file server compared to an OES2SP3
server. The differences between real Windows and Novell Cifs or Novell
Samba are tremendous and between real Windows and NCP are noticeable.
As I already have a DSfW server in place the easiest thing would be to
add the Windows server as member server and use it just for file
serving. Or I could migrate the DSfW domain to the Windows server and
run the Windows Domain in native mode synced to eDir via IDM.
What would you do?
-...ZenWorks Patch Management Agent fails to install: Registrati
I'm trying to setup ZenWorks Patch Management... I have the server up
running, and now I'm trying to install the agent on SLES servers...
I'm getting the following error:
Installing ZENworks Patch Management Agent 6.4185
Copyright (c) 2006 Novell Corporation
Performing tests for Silent install...
Checking Group List
Silent installation tests successfully completed.
Constructed Inet with: 192.168.9.166
Connecting on port: 80
Returning cached address: 192.168.9.36
This machine's IP Address is: 192.168.9.36
This machine...Zenworks agent install
Is there a way to install the zenworks agent onto multiple desktops that
dont have it already installed? and set all the options and settings?
cheers in advance
Sure, do you want to do it via login script or NAL?
If these TIDs don't help or you have other questions, please ask.
Jared L Jennings
Novell Support Forums SysOp
Systems Engineer for Data Technique, INC.
Using XanaNews 18.104.22.168
I tried the login sc...msi install with zenworks
I am creating an app object to do an client update install of GW7.01.
There seems to be quite a few problems with the msi based install when I
read through the kb on the subject.
Some of the problems I have seen so far are not installing for all
users, install error 1603, Sendto not working.
It isn't clear if all of these problems have been put to rest with 7.01
or 7.02. Does anyone know where I can find an answer on which problems
still exist and what version they are gone in?
Probably best asked in the ZEN forums.
Novell Support Foru...MSI install for Zenworks
I have a question regarding the setup of a nal application for the .MSI file for zenworks? I have setup the application object but I would like to install additional features like remote management and inventory, and I found a tid (# 2966875) regarding this however it still doesn't install additonal features, it keeps the orginal install, is there anything else that I need to setup for that? I have manually installed it on some computers but I would like to roll it out to the rest of the company. Thank you for any help that you can offer,
> I have manu...install netware components not installed in the 1st installation
I have a NW5.1 running file services and NW5.0 running GW3.6. Both servers
are installed in the same tree.
I now wish to install Netware components like Portal, HTTP, NTTP etc one my
NW5.1 server. I have SP6 installed on my NW5.1
What is the correct procedure I should adopt to successfully install these
On Wed, 11 Aug 2004 09:00:46 GMT, email@example.com
>What is the correct procedure I should adopt to successfully install these
Use the console GUI Install, and select the products you want to
inst...MSI installer only installs aspx and web config
I created an MSI installer prog at home last night and installed at the office today.It only installed:
2) web config etc.
It didn't install the code behind or the solution files.(I had wanted to work on the project today)I assume that I can't somehow alter the MSI so that it installs ALL the files?(obviously, all the source code and solution files are at home)Do I have to wait till I get home tonight and "recreate " the MSI, so that it installs all the files?
Can someone confirm / deny?
yogibuy an old van and drive round oz.
OK, ...Why did you remove xpi install and user agent install?
Why did you remove xpi install and user agent install?
I tried to install the user agent uabar it. No tool bar is their.
Greg P Rozelle
Greg P Rozelle wrote:
> Why did you remove xpi install and user agent install?
> I tried to install the user agent uabar it. No tool bar is their.
Old incompatible extensions cause crash, hang, or other major problems.
Also, typically when a new release is out, the extensions *have* to be
updated as well.
There are problems with it, but I'm not a programmer, so don't ask me
...(1) MSI installs to my local "web" (2) config problems (3) strange VS installer while creating MSI
Thanks for any help on the following three issues:(1) When I put the MSI that I generated on my FTP server, it tries to install to the virtual web directory from whence it came on my local machine. (2) I then put a copy of the project directory on the web server. When I ran some of the controls on the first page, I received errors (see below) possibly having to do with web.config, but the description is so vague it's hard for me to tell. I did as I understood the instructions below but I'd appreciate resources. All references to deploying projects didn't ...superreview granted: [Bug 290312] Installer fails: Error occurred during installation
Brendan Eich <firstname.lastname@example.org> has granted Mike Shaver
<email@example.com>'s request for superreview:
Bug 290312: Installer fails: Error occurred during installation -
Cross-Platform COM: -229 SCRIPT_ERROR
Attachment 180718: Patch: permit either FileOp or Install classes for the
------- Additional Comments from Brendan Eich <firstname.lastname@example.org>
r=brendan, sr=me too if it helps. Thanks again,
...Occassional appearance of Install/Install.aspx?mode=Install
Since upgrading to 3.1.1 I am getting the occasional redirection to Install/Install.aspx?mode=Install. Is anyone else recieving this or does this suggest the installation script didn't complete?Jonathan Palmer
Check your web.config and see if install=true....
In a previous version this was happening to me until i turned it off.
...Is there a Gzip installer that I could install ?
Trying to make things easier I have a question about the linux desktop
interface .. is direct package installed that I could use opening it on
files using the right click method from windows ? "open with" / "chosen
freeware" = click !
> Trying to make things easier I have a question about the linux desktop
The linux desktop interface can be a lot of things, KDE,GNOME, windowmaker
to name but a few.
> .. is direct packa...