install netware components not installed in the 1st installation
I have a NW5.1 running file services and NW5.0 running GW3.6. Both servers
are installed in the same tree.
I now wish to install Netware components like Portal, HTTP, NTTP etc one my
NW5.1 server. I have SP6 installed on my NW5.1
What is the correct procedure I should adopt to successfully install these
On Wed, 11 Aug 2004 09:00:46 GMT, firstname.lastname@example.org
>What is the correct procedure I should adopt to successfully install these
Use the console GUI Install, and select the products you want to
inst...Connections not clearing on Netware Server
Question: how can we have the netware connections clear automatically from
the netware server without having to go to the Monitor.nlm and clear them
manually or reboot the Netware server?
Description: Connection do not clear and accumulate on the connection
information of the netware server.
Netware 5.0 server with latest patches
Windows 2000 server with clients accessing novell via terminal server
Latest patches on windows installed as well
Are these not-logged-in connections? If so, there no way other that what
you do, but there's also no reason ...Rights required to clear Netware connections
Does anybody know what rights are required to allow a administrator to clear
Netware server connections?
Thanks in advance.
Dave Parkes [NSCS]
Occasionally resident at http://support-forums.novell.com/
...Network Connectivity Problems after installing Netware Cl
I am in the process of trying to set up the evaluation edition of SLES
for the purposes of self education and possible deployment in the
As part of this, I have needed to install the NetWare client onto a PC
testing. The installation went smoothly, with no errors, and the
was fine, until the PC was rebooted.
At this point, no connectivity to the Internet or to any network
Using ping or any other troubleshooting tool is impossible - they have
reported winsock errors.
With DHCP enabled on the NIC, packets are being sent o...Install FTP after netware installation.
Using Netware 6.5 sp4, how can I after installing the pre-migration server
pattern install just the FTP server? Do I use the Install from the GUI or
do I use NWConfig?
I looked in the NW65PROD cd at the FTP directory, and just saw the ftp.zip.
I didn't see any .in or other 'installation' file to select from Install via
the GUI or NWConfig.
Thanks in advance!
S. D. Rose wrote:
> Using Netware 6.5 sp4, how can I after installing the pre-migration server
> pattern install just the FTP server? Do I use the Install from the GUI or
> do I use NWConfig?...User connections do not clear from Window users after logout
Question: Why doesn't Windows logout clear users in Novell?
More: This customer has a 5.0 server with all latest patches. He is running
Windows 2000 terminal server on a separate server that accesses an
application on Novell with client 4.91. The problem we are getting with this
install as well as other non terminal server installs (on other sites) is
that the Windows stations do not release the connection. As a result we are
running out of users.
I tried testing this by restricting only one login per username and it will
block users that are reentering Novell.
What can ...Rights required to clear Netware connections with NRM
After giving "Console operator" rights to a user, he still can't clear
connections with Remote manager... Is there anything else I have to do to
allow him to perform the action?
The user must have S rights to the server, or Console Operator rights PLUS
supervisor rights to the object whose connection is being cleared.
"Yann Laplante" <YLAPLANT@psc-cfp.gc.ca> wrote in message
> After giving "Console operator" rights to a user, he still can't clear
> connections with Remote ma...Stuck user ID; connection not cleared after logout
We limit our students to 1 simultaneous login. Recently at our high
school, some students randomly are prevented from logging in because the
system has not cleared them from the last computer they used, even
though they logged out.
We are using Windows XP SP3 workstations running the Novell Client 4.91
SP5, connecting to a NetWare 6.5 SP8 server running eDirectory 8.8 SP5
Patch 3 and NMAS 22.214.171.124.
Ideas? I have already tried shrinking the watchdog timeouts.
Do a search on &q...New WinXP install -- cannot connect to NetWare 5.1
My father is running NetWare 5.1 and four Windows 98 client computers. He
has asked me to upgrade the Windows 98 computers to Windows XP. I am not
familiar with Novell software or even the NetWare server configuration.
My dad contracted someone to have NetWare installed, but this particular
gentleman has since passed away.
There is one computer in his office that does not get much use, so I
started with that one. I fdisked and freshly installed Windows XP,
installed all device drivers, then installed Novell Client 4.91 SP2. The
Novell login window appeared upon reboot, but upo...Installing just connection licenses on a Netware 5 server
We are trying to install more licenses to a Netware 5 server. When I run
through the install on NWconfig I get the following error "Cannot install
this license certificate because doing so would exceed the limit on
installed license units <LICENSE_INSTALL-5-37>"
TID10055952 seems to be telling me the telling me that I cannot add part of
the server license to the tree. Furthermore, my licenses are not in the
TID's list of serial numbers that may need replaced.
I only want the connection licenses; is there any way to install the
connection licenses without...how to clear connections for *ONE* open file, like in NRM for NetWare?
the remote manager of oes2sp2 doesn't offer the same set of possible actions, like
NoRM of NW6.5 does:
Volume Management-> click down to the locked file -> INFO:
Global lock information:
Use count: 1
Open count: 1
Open for read: 1
Open for write: 1
Deny read: 0
Deny write: 1
File lock information by connection:
Select All - Clear All [close file for marked connections]
Close File | User name | Connection | Task | Lock status | Log status
[ ] | Admin ...Allowing Clear text passwords during Netware 6.5 Install
What are the advantages of allowing Clear text passwords in the LDAP
portion of the install. What difference does it make?
Does this just concern server to server comunication and if so if the
LDAP services are on the same box as the web server is this still
> What are the advantages of allowing Clear text passwords in the LDAP
> portion of the install. What difference does it make?
Some LDAP apps seem to require it.
> Does this just concern server to server comunication and if so if
> LDAP services are on the same box as the web server ...How to clear or close connection in connection pool mode?
I use ADO.NET in connection pool mode, however, we have password change
so that we need to close all existing connections in the connection pool
once the sybase password
In ASEConnection object, I can't find any method to close all connections.
What ways I should handle this situation? Any suggestions are welcome.
You must have the 2.0 Provider, Ase.AdoNet2.AseClient.dll
Use the props per the MS ADO.NET 2.0 spec on AseConnection:
ClearAllPools for all the pools
...Connecting Netware 4.1 and Netware 6 through a firewall
we have an Netware 4.11 Server with IPX (and IP) and a Netware 6 Server
with IP (and IPX) in the same NDS tree.
We want to bring the Netware 6 server in the DMZ of a firewall that does
not route IPX packets. How can we assure, that the Netware 4.11 server in
the trusted zone can still communicate (for NDS sync) with the Netware
Netware 6 server in the DMZ.
Can they communicate over IP (what ports have to be opened then at the
Thanks for you help.
> Can they communicate over IP (what ports have to be opened then at the