Replacing Crashed Server w/ new w/ same ID# and name

I am installing a Netware 5 server to replace a Netware 5 server that
has crashed. Since it will perform the same funtions as the one it is
replacing I thought I would just leave the old server containers in the
Tree. This way once it is installed it will be ready to go.

Problem is, when installing I get to the NDS Installation phase and it
hangs. I am also getting two Novell Message Popups on another server.

The first being: POLICY MANAGER - The NLS licensing services are not
available on Server SC_WG. Please make sure the NLSLSP.NLM is loaded.
Error # C0001003.

The next being: POLICY MANAGER - The Server SV_WG is running without a
Server Base license. Please install a Server Base license. Please
install a Server Base license immediately to stay in compliance with the
license agreement for the server.

I am confused. Should I remove the old instance of the server from the
tree and let it install a new instance? Name it something else with a
different IP and then once it is stood up migrate the users and groups
from old to new? Run some sort of repair utility. I really have no idea
and no experience with Netware 5. 

In advance thanks to anyone who can help me. It would be greatly
appriciated.


-- 
tsteinmann
------------------------------------------------------------------------



0
tsteinmann
3/17/2011 9:36:03 PM
novell.netware.5x.install 3340 articles. 0 followers. Follow

3 Replies
641 Views

Similar Articles

[PageSpeed] 37
Get it on Google Play
Get it on Apple App Store

Those two errors are solely to do with licensing and nothing to do with
the server objects. You will have to install the server license on this
new server, once the eDir issues are resolved.

That's said, you cannot expect the server installation process to just
take over the existing objects that related to another physical server.
> Should I remove the old instance of the server from the tree and let it
> install a new instance? Name it something else with a different IP and
> then once it is stood up migrate the users and groups from old to new?
Either of these are viable strategies; in the second case once the old
server and related objects are gone from the tree completely, you can
change the new server's name and address (not both in the same move!) to
match the old one.


-- 
Andrew C Taubman
(Sorry, support is not provided via e-mail)

Opinions expressed above are not
necessarily those of Novell Inc.
------------------------------------------------------------------------
ataubman's Profile: http://forums.novell.com/member.php?userid=34
View this thread: http://forums.novell.com/showthread.php?t=435090

0
ataubman
3/17/2011 10:36:01 PM
From what I can remember...I am almost certain you need to remove the
Old server objects and Volume objects.  They will be recreated when you
install the server into the tree.

Now, about your licensing...you don't have a license in the tree?  Take
a look with nwmanager or ConsoleOne...you should be able to find it...if
it is not in the root, then check elsewhere.  If not, you will need to
manually install the license to the server.  C1 can do this, I beleive,
as well as NWMgr.   

You might also want to check where you master license server is...is it
the one that crashed?  You're coing to have to reinstall that as well.

There are plenty of TIDs and docs on Novell Support to point you in the
right direction on that.

Good luck!

--El

ataubman;2087020 Wrote: 
> Those two errors are solely to do with licensing and nothing to do with
> the server objects. You will have to install the server license on this
> new server, once the eDir issues are resolved.
> 
> That's said, you cannot expect the server installation process to just
> take over the existing objects that related to another physical server.
> 
> Either of these are viable strategies; in the second case once the old
> server and related objects are gone from the tree completely, you can
> change the new server's name and address (not both in the same move!) to
> match the old one.


-- 
El LaGrew
elbert.lagrew#katun.com
elagrew on twitter
------------------------------------------------------------------------
elagrew's Profile: http://forums.novell.com/member.php?userid=10240
View this thread: http://forums.novell.com/showthread.php?t=435090

0
elagrew
3/18/2011 1:06:01 AM
Tsteinmann,
> I am installing a Netware 5 server to replace a Netware 5 server that
> has crashed. Since it will perform the same funtions as the one it is
> replacing I thought I would just leave the old server containers in the
> Tree. This way once it is installed it will be ready to go.
>
See:
http://www.novell.com/support/php/search.do?cmd=displayKC&docType=kc&externalId=3338221&sliceId=1&docTypeID=DT_TID_1_1&dialogID=214156767&stateId=0%200%20214158772

- Anders Gustafsson  (Sysop)
  The Aaland Islands (N60 E20)


Novell has a new enhancement request system, 
or what is now known as the requirement portal.
If customers would like to give input in the upcoming 
releases of Novell products then they should go to
http://www.novell.com/rms

0
Anders
3/18/2011 6:56:02 AM
Reply:

Similar Artilces:

regex excluding \w.\w\w\w.\w
I'm trying to figure out how to exclude upload files with 2 periods at the end (b/c of that virus which I forgot the name of, maybe nimba?) Anyhow, this is what I have but it doesn't work. When I try to submit with the double periods the test always results in false and never gives the error msg. if ($filename=~/(\w.\w\w\w.\w)$/) {error($q, "Invalid file name; files must only contain one period. Please push the back button on your browser and try again."); } -- ------------------------------- - Teresa Raymond - - Mariposa Net ...

\W and [\W]
Hi list, Can anyone enlighten me as to why \W behaves differently depending on wether it's inside or outside of a character class, for certain characters: This sample program: use encoding 'utf8'; $x =3D 'Gro=C3=9Fbritannien'; $\ =3D "\n"; print '1 ', $x =3D~ /(\W+)/; print '2 ', $x =3D~ /([\W]+)/; print '3 ', $x =3D~ /(\w+)/; ....prints: 1 2 =C3=9F 3 Gro=C3=9Fbritannien I do not understand why the Eszett matches [\W] in #2. Same behavior if I replace the Eszett with another, non ASCII, "letter", e.g. &...

Replacing a server w/new hardware
I must be typing in the wrong keywords doing a search. I am looking for a TID that explains how I can replace an existing NW6.5SP2 server with a new server. I'd like to keep the IP address, name, volumes, etc.. I appreciate any assistance. The NetWare Migration Wizard will do this for you. You should be able to find documentation on the Novell site. http://download.novell.com/Download?buildid=nMihwfdEES8~ don.altermatt@state.or.us wrote: > I must be typing in the wrong keywords doing a search. > > I am looking for a TID that explains how I can replace an e...

A transport-level error has occurred when receiving results from the server.
We've devoted a resource to this today, but I have to believe it's something easy that we're overlooking.  The scneario is that we have a production Web application that until last weekend had a SQL 2000 back end.  This weekend we installed a new instance of SQL 2005 and everything works (we tested in a sandbox environment, but someone must not have load tested enough) and never saw these exceptions.   So, after the upgrade we now receive 100's of thexe SQL excptions per day:A transport-level error has occurred when receiving results from the server. (prov...

Help w/ Deployment of Netware 6.5 to 24 new servers.
We are receiving 24 new servers in the next month. All the servers have to be loaded with Netware 6.5 and then will be distributed to 24 locations replacing Netware 5.1 servers. We are planning on a migration of the data on the Netware 5.1 servers. What is the best way to get all the servers loaded with Netware 6.5? They will all be identical hardware. We were looking for something like ghost that will allow us to make an image. Portlock Storage Manager is a good solution. http://www.portlock.com/ <bbowers@lexington1.net> wrote in message news:a4NFf.5520$yL4.5201@p...

Adding a new Netware 6.5 server into a 5.1 tree w/edir
We currently have 8 netware 5.1/sp8 w/edir 8.7.7.3.3 smp. Is it ok to add a 6.5/sp5 server to this tree or do we need to upgrade the existing 5.1/sp8 servers first? Thank you. On 09/11/06 chris1234@aol.com wrote: > We currently have 8 netware 5.1/sp8 w/edir 8.7.7.3.3 If this is 8.7.3.7 you are OK. If it is 8.7.3.3 you need to update it first, I suggest edir8739 just released. -- Andrew C Taubman Novell Support Forums Volunteer SysOp http://support.novell.com/forums (Sorry, support is not provided via e-mail) Opinions expressed above are not necessarily those...

new nw6.5 install w/ sp1a several errors hang downing of server
Hello all, I've just done a fresh install of nw6.5 w/sp1a, the server comes up fine, however when downing the server it hangs and reports the following error messages. - Module NTLS.NLM not unloaded - must unload NPKIT.NLM before it can be unloaded. - HTTPSPK: Listening thread() on xxx.xxx.xxx.xxx:81 exiting after error - HTTPSPK: Listening thread() on xxx.xxx.xxx.xxx:8008 exiting after error - HTTPSPK: Listening thread() on xxx.xxx.xxx.xxx:8009 exiting after error - BTCPCOM : A TCP/IP accept() error (50) has occured. - ProcessXServerConnectionRequest() RET: ffffffff...

Installing NW 5.0 on new Dell PowerEdge SC420 server /w SATA
Hello, we have received a new Dell PowerEdge SC420 server and I am trying to install Netware 5.0. The problem I am having I believe stems from the two SATA HDs. Basically, when the installation reaches the screen where the "Select a Storage Adapter" appears, only IDEATA is listed. I found this webpage that seems to offer a solution: http://www.answersthatwork.com/Download_Area/ATW_Library/NetWare_5.x/NW5__2 -Tip-Serial-ATA_SATA_Support_in_NetWare_5_0.pdf I downloaded the SATA.HAM file and whatnot and added it to the list of storage adapters, but the problem I am having...

new dnn on a hosted server w/ sql server
Hello all, I have created a blank database, setup a user for that database, copied all of the DNN files to the web root, modified the connection string of the web.config and when I go to run the website to setup the portal, all I get is an error about customErrors message telling me to set it to Off. The weird thing is the code in the web.config file is already in there and it is correct. I have setup several local copies of the DNN portal and I did nothing different. Perhaps the hosting company has the site setup incorrectly? Please help, -D Did you type 'off' rather ...

superreview granted: [Bug 65303] new folder created with same name as (and folder renamed to) previously renamed folder contains phantom mail
Scott MacGregor <mscott@mozilla.org> has granted David Bienvenu <bienvenu@nventure.com>'s request for superreview: Bug 65303: new folder created with same name as (and folder renamed to) previously renamed folder contains phantom mail - crashes when read https://bugzilla.mozilla.org/show_bug.cgi?id=65303 Attachment 187415: fix problem m-wada described in comment 31 https://bugzilla.mozilla.org/attachment.cgi?id=187415&action=edit ...

new server r/w replica stuck in new state. DIGESTMD5 issue.
--____CAZYHINMDVESQWKQCQUQ____ Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline; modification-date="Thu, 29 Aug 2007 13:40:36 -0400" Added a new server HCCS-NW1, NW65sp6. Added a R/W replica of root. (Stuck in 'new' state) Time sync between all servers if perfect. 4 servers are NW6.5sp6, 1 NW6.0sp5 Found DIGESTMD5 in Security, Authorized login methods. Can not delete. How do I 'fix' this? Thanks, Rick DSREPAIR FILE FROM REPORT SYNCHRONIZATION STATUS: NetWare 1602.00 Directo...

Replacing a Netware 4 server with a NetWare 6 server...
I have been hired to set up a netware 6 server and transfer some data from an old nw4-server. It�s a quite simple environment, just file-sharing, printing and some simple policies... I have some questions and thoughts about it... I have most been working with Netware 4 and a bit with netware 5. What is the biggest differences with Netware 6? What sizes of volumes and partitions would you recommend on a netware 6 server? The old netware 4 server is running Zenworks starter pack with some policies and a few applications (for simple installation). How would they be affected ...

\w differs from [\w]
--001485f626849e6383046e5e0be4 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Is this a known bug? -------- BEGIN -------- use open qw/:locale/; BEGIN { require locale; locale->import() if shift; } use Data::Dumper qw( Dumper ); sub dump_str { my ($s) = @_; my $internal_enc = utf8::is_utf8($s) ? "utf8" : "iso-latin-1"; local $Data::Dumper::Useqq = 1; local $Data::Dumper::Terse = 1; local $Data::Dumper::Indent = 0; print("Input = ", Dumper($s), " [$internal_enc]\n&quo...

Can a Windows 2003 server see a Netware 6.5 server w/ CIFS loaded?
Apparently the answer, at least w/ the W2k3 server as configured out of the box, is no. What, if anything, must I do in order for the Windows server to see the Netware servers? I would like to avoid installing a Novell client on the Windows server just because it will add a layer of complexity I'd like to avoid, but if that's the only way, please let me know. TIA. -S- If the 6.5 server has IPX on it, it might be possible to use the Microsoft client (if they provide on 2003) to see the 6.5 server. If it doesn't you have two choices. 1) Set up NFA and ...

Web resources about - Replacing Crashed Server w/ new w/ same ID# and name - novell.netware.5x.install

Facebook Tests Replacing Keyword Ad Targeting With Broad Category Targeting
Facebook is testing a major functionality change for its self-serve performance ad tool that would replace the specific Like keyword targeting ...

Replacing a Pebble Smartwatch screen - YouTube
I got a broken Pebble from a friend, and fixed it with a dremel, some epoxy, and a replacement screen. Total cost of $30.

School apologises for taking cane off blind boy and replacing it with pool noodle
A primary school has apologised for taking away the cane of an eight-year-old blind boy and replacing it swimming pool noddle as a form of punishment. ...

Music teachers outraged over CDs replacing accompanists
Whether it is violin, flute or percussion, each year tens of thousands of nervous children across Australia are guided through their music exams ...

Replacing China's broken economic gauge
As Chinese growth shifts away from its reliance on heavy industry, we need a new index to the track the ups and downs of the economy.

Matt Toomua focused on Brumbies, not replacing Quade Cooper in Wallabies
ACT Brumbies flyhalf Matt Toomua is refusing to get caught up in Wallabies distractions this week.

Apache Software Foundation unveils Hadoop 2, replacing MapReduce with YARN
The Apache Software Foundation unveiled its latest release of its open source data processing program, Hadoop 2. It runs multiple applications ...

No talk of replacing Bill Shorten as Labor leader: Anthony Albanese
Labor frontbencher Anthony Albanese says he's not interested in taking over the leadership, and the party remains united behind Bill Shorten. ...

Reject Shop names Ross Sudano as new chief replacing Chris Bryce
Discount variety retailer The Reject Shop has appointed a former beer and grocery industry executive, Ross Sudano, as chief executive.

A case of one bad government replacing another
THERE is a widening gap between the sort of government a Tony Abbott-led Coalition will need to become to steer the nation successfully in the ...

Resources last updated: 12/13/2015 12:27:41 PM