upgrade edir 8.7.3 to 8.8.2 or 8.8.3?Our tree: Netware 6.5SP7 and OES2/Linux, edir 8.7.3.10b ftf1 and edir
8.8.SP2 ftf2
I started to install new servers with edir 8.8 some month ago, some of the
edir 8.7.3 servers will be switched of before long. Now I want to upgrade
the remaining 8.7.3 servers to 8.8. It seemed clear to me that I wouldn't
install 8.8.2 if 8.8.3 is out. But after reading the postings here, I am
quite unsure...
My questions:
Isn't it dangerous to stay at 8.8.2? Some of the fixed problems are
overflows - these might be security relevant?
I saw two problems with 8.8.3 here: the ldap probl...
how to backrev edir 8.7.3.8 to 8.7.3.7Im need to back rev 8738 to 8737 for Netware 6.5 SP5 server. I've looked
though TID 10100930 but am not sure if it applies since FACT only list
this is for Solaris, Linux or HP. Please let me know if it's ok to follow
this TID if not, please point me in the right direction.
Thank you!
Hi,
ralph@canon.com wrote:
>
> Im need to back rev 8738 to 8737 for Netware 6.5 SP5 server.
Why? You should have a damn good reason to do this. Backrevving
eDirectory isn't something that should be done lightly.
CU,
--
Massimo Rosen
Novell Product Support Forum Sys...
eDir 8.7.3 and eDir 8.7.3.3This is a multipart message in MIME format.
--=_alternative 0078B44D85256F94_=
Content-Type: text/plain; charset="US-ASCII"
I have about 30 NW6 and 10 NW6.5 server. I want to upgrade to eDir 8.7.3.3
across the board.
I was also thinking of upgrading NICI 2.6.5 and adding the SECUPD2a and
NMAS 2.3.5
This requires me to reboot the server 5 times fro the NW6 servers and 4
times for the NW65 servers.
Is there a consolidated support pack that I can build to upgrade all or
some of these together.
Just cycling the server 5 times will take about an hour!
--=_alternat...
Edir 8.7.3.5\ 8.7.3.6\8.7.3.4Ok Iam confused with the roll back issue. What is the Edir that is working
Iam hearing Novell rolled back 8.3.6 but I can only see that 8.7.3.4 is
stable but Iam not hearing if 8.7.3.5 is ok. Iam on 8.7.3.5 and Iam having
issue with keeping edir healthy. So is this my issue and or how do you roll
back if I need to. Also I see some said " dsrapir full attened is not the
preferred way of getting ds healthy so what is this about I have not heard
of this before.
Thanks to anyone who can clear this up while I wait for ssupport to get
back to me on the phone.
Hi,
8735 came with N...
eDir 8.7.1.3 to eDir 8.7.3I have NW5.1+SP7 servers and NW6+SP3 servers. All severs run edir
8.7.1.1 (2 run
8.7.1.3).
Must I upgrade to eDir 8.7.3 ?
What are the changes ?
Thanks
Jean-Pascal Laux
No, you don't HAVE to upgrade the NW5.1 servers.
8.7.3 comes with the NW6.5sp1a CDs (I only install with the overlay CD).
--
Timothy Leerhoff
Principal Consultant
Independant Experts
Novell Support Forums Sysop
...
Upgrade of eDir 8.6.2 to 8.7.3 / 8.8I have a couple of NW6 servers running eDir 8.6.2 - I'd like to update
them to 8.7.3 to take advantage of all the features of iManager 2.5
1. Is this a free upgrade or am I required to purchase 8.7.3 ?
2. Is 8.8 a better upgrade option ?
Steve
Hi,
Steve Babcock wrote:
>
> I have a couple of NW6 servers running eDir 8.6.2 - I'd like to update
> them to 8.7.3 to take advantage of all the features of iManager 2.5
>
> 1. Is this a free upgrade
On Netware yes.
> 2. Is 8.8 a better upgrade option ?
No. 8.8 is a complete brand new *Version* wi...
[IDM 3] eDir 8.7.3.8 or 8.8Hello,
I'm going to install a IDM 3 on SLSE 9 in a production environment to
synchronize some systems. What is the best solution for the identity vault
version , eDir 8.7.3.8 or eDir 8.8 ?
This meta directory will be used only to consolidate some information that
will be accessed with a web interface and will do some provisioning. Are
there some known bugs with eDir8.8 ?
R�mi.
If you are ever going to want to go to 8.8 and above I would start with
it. It probably isn't quite as stable as 8.7.3.8, but upgrading to 8.8
once IDM is installed is problematic and requires ...
EDIR 8.7.0.3 & EDIR 8.7.3NW5.1 SP7
EDIR 8.7.0.3
I am about to update to EDIR 8.7.0.4, i was wondering should i be
looking to update to EDIR 8.7.3 or newer? or is EDIR 8.7.3 NW6 specific
I will not be updating to NW6.5 till next year.
many thanks
8.7.3 is supported on NetWare 5.1 with the current support packs.
Just be aware that the webapps that come with 8.7.x won't run on NW 5.1
because of the apache/tomcat requirements.
Jim
--
Jim Henderson, Novell Support Forums Volunteer SysOp
Homepage at http://hendersj.dyndns.org
eDirectory Training info at http://ediratt.dyndns.org
So...
eDir 8.8.2 install failure in conjunction with eDir 8.7.3.10Hello NG
On our SLES10 SP2 we tried to install eDir 8.8.2. In our environment we have
different Netware server with eDir 8.7.3.10 working
On the Sles10 Server i ran ./nds-install for the installation procedure.
After this procedure i started the following command.
ndscondig add -t mytree -n ou=server.o=abc -a cn=admin.o=abc -w 12345
The setup procedure began to run but then we received the following error
The nds schema in this tree is out of date. You must run ndsrepair to
correct it.
Error -6 setup for nds installation failed.
I ran dnsrepair on the netware server and c...
edir 8.7.3 edir 8.8 Coexistence
We are currently running OES1 Linux, and are planning the installation
of OES2 Linux servers. OES1 has eDir 8.7.3.10, and OES2 will have
8.8.
Can these two versions coexist, or do I have to upgrade the OES1
servers to eDir 8.8?
Thank you.
--
bdkmcgl
------------------------------------------------------------------------
Thank you. That will make my life much easier.
EricVeysey;1618320 Wrote:
> We currently have 3 edir 8.7.3 OES1 servers and co-existing 3 OES2 8.8
> servers in the same tree running smoothly.
--
bdkmcgl
--------------------------...
eDir 8.7.3.2 to 8.7.3.4Can the 8.7.3.4 patch be installed on only one server of a multi-server
network?
We currently have 6 5.1SP6 and 3 6.5SP2 servers all running 8.7.3.2 but
only one of the 6.5 servers is needing the patch at this time.
It can, but if your goal is to fix the dsloader memory leak in 6.5 sp2,
every 6.5 server requires the fix.
--
Andrew C Taubman
Novell Support Forums Volunteer SysOp
http://support.novell.com/forums
(Sorry, support is not provided via e-mail)
Opinions expressed above are not
necessarily those of Novell Inc.
Andrew C Taubman wrote:
> It can, but...
Edir 8.7.3.10aDoes anybody know what is different between Edir 8.7.3.10a and
8.7.3.10? At least I hope, that the TID 7000100 issue has been resolved
- but it is nowhere mentioned, that this is the case.
--
W. Prindl
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
10a was released specifically to resolve those issues.
Good luck.
W_ Prindl wrote:
| Does anybody know what is different between Edir 8.7.3.10a and
| 8.7.3.10? At least I hope, that the TID 7000100 issue has been resolved
| - but it is nowhere mentioned, that this is the case.
-----BEGIN PGP SIGNATURE-----
Version: Gnu...
eDir 8.7.3.8 v. 8.8Hello everyone. We're currently running eDir 8.7.3.7 on several NetWare
6.5 sp5 servers. What are the pros/cons of upgrading to eDir 8.8 vs.
applying the 8.7.3.8 patch? Any compelling reason not to do the upgrade?
Thanks,
Travis
Travis Montgomery,
> What are the pros/cons of upgrading to eDir 8.8 vs.
> applying the 8.7.3.8 patch?
>
Basically that so many apps have ptroblems with 8.8. It should really
have been called 9.0. Lots of new features though.
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
...
eDir 8.8.2I'm looking for information re: coexistence with eDirectory 8.8.2 on new
OES2 Linux servers installed in an existing tree that largely consists
of OES NetWare 6.5 SP7 (eDirectory 8.7.3.9) servers. Is 8.8.2 backwards
compatible? I read through the OES2 documentation, including section
14.2.3 (eDirectory Coexistence and Migration), but found the information
to be lacking.
I have also reviewed article 3171434 (What Novell products are support
with Novell eDirectory 8.8 SP2,
http://www.novell.com/support/php/search.do?cmd=displayKC&docType=kc&externalId=3171434&sli...