site - to - site VPN

Hi,

I am trying to establish a site to site VPN with two BorderManager 3.6

servers running on Netware 6.0.  I have loaded patches nw6sp3e and 
bm36sp2a. I have configured one server as a master and one as a slave.

Time is the same on both servers and routing is working properly
between 
servers prior to setting up the vpn.

The problem I have is that the VPN tunnel does not establish
correctly.  
In the audit log on the master server is get :

- Failed VPN member notifications.
- Failed configuring VPN member SBSPXI01
- Configuring VPN Memeber SBSPXI01
- Computed outbound shared key for connection SBSPXI01
- Created a connection for SBSPXI01
- Created rc5 shared secret for connection SBSPXI01
- Failed VPN member notifications
- Failed configuring VPN member SBSPXI01
- Initiated an IP call to SBSPXI01@10.104.1.4
- The VPN tunnel has been initialized

The SBSPXI01 server is the slave VPN server. If I look at the audit
log 
on the slave server it just shows the slave server ready and waiting
for 
a connection.

I have run out of things to check.....can anyone give me some
suggestions 
on what could be causing this problem.


Reagrds.....Stephen



0
swilcox
11/11/2003 3:05:52 PM
novell.bordermanager.vpn 2677 articles. 0 followers. Follow

4 Replies
862 Views

Similar Articles

[PageSpeed] 41
Get it on Google Play
Get it on Apple App Store

Try dropping the filters (UNLOAD IPFLT) for a bit, in case you are 
missing a filter exception.  (LOAD BRDCFG should put in the required 
exceptions).

Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on 
BorderManager, go to http://www.craigjconsulting.com ***




0
Craig
11/12/2003 1:04:41 AM
> Try dropping the filters (UNLOAD IPFLT) for a bit, in case you are 
> missing a filter exception.  (LOAD BRDCFG should put in the required

> exceptions).
> 
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on 
> BorderManager, go to http://www.craigjconsulting.com ***
> 

Craig,
 I have already unloaded filter support on both BM Servers but still
have 
the same problem.

Regards....Stephen



0
wilcox
11/12/2003 8:45:41 PM
Do you have same NDS tree on both servers?

wilcox@rsl.co.nz wrote:
>>Try dropping the filters (UNLOAD IPFLT) for a bit, in case you are 
>>missing a filter exception.  (LOAD BRDCFG should put in the required

>>exceptions).
>>
>>Craig Johnson
>>Novell Support Connection SysOp
>>*** For a current patch list, tips, handy files and books on 
>>BorderManager, go to http://www.craigjconsulting.com ***
>>
> 
> 
> Craig,
>  I have already unloaded filter support on both BM Servers but still
have 
> the same problem.
> 
> Regards....Stephen




0
Ales
11/14/2003 10:43:46 AM
What VPTUNNEL IP address did you give each VPN server?

Can the servers ping each other?

Have you tried 'synchronize all' in the VPN control menu in NWADMN32?

Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on 
BorderManager, go to http://www.craigjconsulting.com ***




0
Craig
11/16/2003 1:26:41 PM
Reply:

Similar Artilces:

Bordermanager vpn vs Cisco router vpn etc
I have a small client with a Novell 5.x server with about 35 clients, many of which are needing some sort of vpn access. Trying to figure out if it is easier to setup border manager for vpn access on the server or simply get a router that will provide vpn access. Which would be easier or more cost effective in this scenario over a dsl connection. Any suggestions or comments are appreciated. Thanks Paul I guess it depends a lot on cost. Do you already have BMgr? (A copy that includes client-site VPN?) If so, just install that and configure it. As for using ...

BorderManager VPN
Hi, I have a customer who is looking for a VPN solution (No more details yet...) Anyhow they have Border Manager 3.8 for proxy. However another site of theirs uses ISA. I know very little about either products. and would like to know peoples views? is BM a good product for VPN, are their better 3rd Party products? Thanks Hi, I use BM vpns all over the place & rate them highly. The 3.8 release was a major step forward as we now use the ipsec standard for site to site transport & can now talk to any other industry standard ipsec vpn endpoint. Client to...

legacy vpn + new vpn
Hi, I am running a bordermanager nw6 3.7 server configured as a master vpn server. The slave is also a nw6 3.7 server and is in another country. Now we need to put another slave to this vpn, however w'd like to do that with bordermanager 3.8. The question is if we update this server from 3.7 to 3.8, will the legacy vpn run without a problem, while 3.7 on the other side is running. (I think this will be no problem, correct me if I am wrong) On the other hand I want to configure a new master vpn on the same server by use of imanager. The other slave will be the new company. I...

VPN
Where might I find/configure a log of who connects to our VPN, whether or not they login to Netware once connected, etc. The login to Netware portion is relatively unimportant, but I would like to track basic information like remote IP, username, connect time, disconnect time, etc. Netware 6.5, BorderManager 3.8/SP4/IR3. Client is 3.8.11 for all remote users. We currently have two working VPNs - different servers, different OU's. TIA. -S- I don't know if this has changed in later versions of BM but this is how I monitor activity in BM 3.7. Open NWADM...

vpn to vpn connection question
Hello: I've been asked to look into a vpn to vpn connection with a third party vpn server connection to our bm38sp2 vpn. Last week I had asked if this was possible and the answer was yes (but). Currently I have our vpn up and running to allow me secure access from home for remote management. The vpn is setup as the master vpn server. Now, if I try to connect to a third party vpn, will our server be a client in this case (I assume so)? If so, how does this impact our current setup as a master server? Thanks in advance, Chris. PS. Others have suggested (strongly) to si...

vpn
hi i setup my vpn connection i setup it on desktop pc and connected successfully i setup it on laptop(dell inspiron 1520) as like as my desktop and connected but i didn't have any receive what can i do? -- morteza13581358 ------------------------------------------------------------------------ I am not entirely sure what you are trying to get at. What kind of VPN did you try to set up? Is this Vpn on your local computer or in a remote location? -- ghostwind ------------------------------------------------------------------------ ghostwind's Profi...

VPN
I have BM 3.7, I can authenticate, but can't log in to Netware "Tree or server can't be found". Thank you Craig If you add an entry for the server to your local HOSTS file, does it work? -- Lance Reynolds, CNE I can use VPN fine when I connect to BM from the same subnet(I have a switch on the public side with a test box), however when I try from dialin or on broadband/ADSL from another subnet I get tree or server can not be found. At the moment we are only using BM for VPN. Thank you Cheers Craig Craig, Ok, but the pro...

VPN
I am about to install VPN services with BorderManager 3.8 and have been reading some of the documentation. Can someone please explain to me the concept of tunneling and it's implementation with BM as this seems to be one of steps to setting up VPN. Any help is appreciated, as this concept is very new to me. Cheers, hi, tunneling is a process for which IP packets are encapsulated within some other protocol at one end of the VPN (like a wrapping that hides a gift, so the recipient cannot tell what's inside), transmitted over the internet to the other end of the VP...

vpn
hi i setup dsl connection on my laptop but i can't use it via kinternet kinternet don't show it what can i do? :( -- morteza13581358 ------------------------------------------------------------------------ Please see my post here. 'Bryan 手札 — 生活記趣 � Opensuse information' (http://lifestory.moqin.com/?cat=344) It will be able to help you. -- Regards, Bryan Yu http://lifestory.moqin.com/ ------------------------------------------------------------------------ df6269's Profile: http://forums.opensuse.org/member.php?userid=7...

VPN
I am using a Sonicwall for VPN connectivity. We are using NetWare 6.5. Can someone please point me to a TID that will explain all the necessary things I need to do to get my remote client to connect to the NetWare servers. Border Manager is NOT being used at all in this environment. thanks On 5/17/2005 dlorenzen@vtg.biz wrote: > I am using a Sonicwall for VPN connectivity. We are using NetWare 6.5. > Can someone please point me to a TID that will explain all the necessary > things I need to do to get my remote client to connect to the NetWare > servers...

vpn
pcanywhere?!?!?! what kind of encryption does that do? not much AFAIK best to use something that encrypts the traffic I have an SME server (e-smith.org Linux) on my cable modem that is my firewall, webserver, email server, router, NAT, etc.... Been using for years, no problems, very secure. The SME has pptp VPN (128bit) built in. works like a charm, (not as secure as 3DES) I routinely nmap my home server and my work server running checkpoint and my home server gets a higher difficulty rating, much higher, FWIW. you could then use pcanywhere thru the tunnel, this is how I ssh into...

VPN
If I'm using VPN on an unsecured wireless connection can someone see my files if I have file sharing on? It depends on the VPN service, if you are using the Standard Sharing Ports & they are not Encrypted Everyone can see all your files & gain access to them. Check the information on the VPN Service First! "lbc" <ghost@whatever.com> wrote in message news:dlv8cv$8eh$1@news.grc.com... > If I'm using VPN on an unsecured wireless connection can someone see my > files if I have file sharing on? > > ...

VPN
We are currently using a Cisco VPN 5001 concentrator authenticating to a Cisco Secure Radius Server. I do not manage this hardware/software. I authenticate just fine to the organization itself but as in any organization, the organization spans multiple subnets, networks, etc. The dilemma I am having is logging into my server once I get authenticated. I have a Novell client installed but I cannot login to the server because it does not find it -- here I'm listing the server name, server tree and context. I've also tried mapping drives to the server by IP addres...

BMEE VPN and Cisco PIX VPN
Quick question on VPNs. Finally got my Bordermanager VPN to work thru my PIX firewall by being a little creative...by VPNing within a VPN. To explain, the connection goes from my ISP > PIX 515 > Bordermanager 3.7 > Internal network. I have enabled VPN on both the PIX and Bordermanager servers so I connect to the PIX VPN and then to my Bordermanager VPN (within the PIX VPN). The PIX vpn is darned quick, but connecting to my BMEE box is almost too slow to consider useful. I can run programs, but drive mappings come and go and launching any executable from the internal ne...

VPN and iManager
--____QYNABXMVMFKNILQFHXTH____ Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 Content-Disposition: inline; modification-date="Fri, 17 Jul 2008 15:28:53 +1000" SGksDQoNCldlIGp1c3QgaW5zdGFsbGVkIEJvcmRlck1hbmFnZXIgdjMuOSBTUDEgKHVwZ3JhZGUg ZnJvbSBCTSAzLjcpIGFuZCBhcmUgcnVubmluZyBpTWFuYWdlciAzLjYNCg0KSW4gaU1hbmFnZXIg djMuNiB3ZSBjYW4gc2VlIGFuZCBjb25maWd1cmUgQWNjZXNzIFJ1bGVzLCBQcm94eSwgZXRjIGJ1 dCB0aGUgVlBOIG9wdGlvbiBkb2VzIG5vdCBsaXN0IHVwLg0KDQpDb3VsZCBzb21lb25lIHBvc3Qg aG93IHRvIGdldCBWUE4gbGlzdGVkIGluIGlNYW5hZ2VyIHN1Y2Nlc3NmdWxseS4gVW5kZXIgSW5z dGFs...

Web resources about - site - to - site VPN - novell.bordermanager.vpn

John Moltz's Very Nice Web Site
John Moltz's Very Nice Website

Nevada National Security Site - Wikipedia, the free encyclopedia
November 1951 nuclear test at Nevada Test Site. Test is shot "Dog" from Operation Buster , with a yield of 21 kilotonnes of TNT (88 TJ). It was ...

RIAA lawsuit kills Popcorn Time-like free music streaming site
Piracy site Aurous is disabled forever, according to lawsuit settlement. (credit: Aurous ) A music piracy site for the truly lazy that debuted ...

Site News – Hiccups Coming Soon!
Folks, I just wanted to give you some warning on the upcoming hiccups. I have to update the site’s theme, and that will temporarily overwrite ...

Protecting your site for free with Let's Encrypt SSL certificates and acmetool
... Encrypt here . The certificates from Let's Encrypt have a short life of 90 days, and this is done on purpose so that they encourage web site ...

Members of Eagles of Death Metal revisit Paris attack site
The California rockers revisited the ravaged Paris theater where they survived a massacre by Islamic extremist suicide bombers

Pinterest Acquires Shopping Site The Hunt
With its acquisitions of shopping site The Hunt and meme app Pext, Pinterest is zeroing in on its shopaholic users. With its millions of Pins ...

YouTube Rewind's 2015 Video Enlists the Site's Biggest Stars - Fortune
And reenact some of the best videos from the past decade.

Sinclair Acquired And Will Relaunch Mobile News Site Circa
... Group , Inc., the owner of the most local TV stations in the country, has purchased and next spring will relaunch the defunct mobile news site ...

Hayden Christensen Star Wars Rumor Continues To Circulate The Internet As Some Site Claim ‘It’s Confirmed’ ...
Will Hayden Christensen return to the Star Wars Universe to reprise his role as Anakin Skywalker/Darth Vader? For months, now the rumor has circulated ...

Resources last updated: 12/11/2015 9:44:02 AM