Running PB 3.0, 4.0, 5.0 and 6.0 on same PC

I am attempting to run PowerBuilder 3, 4, 5 (both 16 and 32 bit), and 6
on the same PC. I know that sounds crazy but all of those releases are
still in use at my company.
The only problem I am having is I can't get 6.0 to use its own pb.ini
file.  I am running NT 4.0 and have made the following entries in my
WIN.INI in the [Powerbuilder] section: INITPATH=c:\......   statement
for PB3, INITPATH040 for PB4, INITPATH050 for PB5, and INITPATH060 for
PB6. This method works for PB3, 4, and 5 but not 6. PB6 seems to be
using the INITPATH statement but ignores the INITPATH060 statement. Most
of these versions are running from a network file server so I can't keep
the PB.ini in the normal place. Any suggestions on this?

0
John
1/23/1998 8:22:55 PM
sybase.powerbuilder.general 62418 articles. 18 followers. Follow

1 Replies
798 Views

Similar Articles

[PageSpeed] 7

Try a registry entry:

Key:
HKEY_CURRENT_USER\Software\Powersoft\PowerBuilder\6.0

Entry:
InitPath

Good luck,
Terry [TeamPS] and Sequel the techno-kitten

On Fri, 23 Jan 1998 14:22:55 -0600, John Legenhausen
<jlegenhausen@pillsbury.com> wrote:

>I am attempting to run PowerBuilder 3, 4, 5 (both 16 and 32 bit), and 6
>on the same PC. I know that sounds crazy but all of those releases are
>still in use at my company.
>The only problem I am having is I can't get 6.0 to use its own pb.ini
>file.  I am running NT 4.0 and have made the following entries in my
>WIN.INI in the [Powerbuilder] section: INITPATH=c:\......   statement
>for PB3, INITPATH040 for PB4, INITPATH050 for PB5, and INITPATH060 for
>PB6. This method works for PB3, 4, and 5 but not 6. PB6 seems to be
>using the INITPATH statement but ignores the INITPATH060 statement. Most
>of these versions are running from a network file server so I can't keep
>the PB.ini in the normal place. Any suggestions on this?

0
tvoth
1/26/1998 12:57:54 AM
Reply:

Similar Artilces:

0.0.0.0 ????
Obviously a local IP, but what are its functions/purpose? Thanks for educating the uneducated. In article <MPG.18bf7ade16e851cb989680@news.grc.com>, shr@p.com says... > > > Obviously a local IP, but what are its functions/purpose? > > Thanks for educating the uneducated. > Any available adapter - i.e. not bound to specific IP address. -- Bloated Elvis In article <MPG.18bf7ade16e851cb989680@news.grc.com>, shr@p.com says... > > > Obviously a local IP, but what are its functions/purpose? > > Thanks for educating the une...

0.0.0.0
Can someone tell me the function of this scan? FWIN,2001/08/28,20:06:43 -6:00 GMT,0.0.0.0:800,255.255.255.255:800,UDP "Ben" <notben@home.com> wrote in message news:9mhion$2hf9$1@news.grc.com... > Can someone tell me the function of this scan? > FWIN,2001/08/28,20:06:43 -6:00 GMT,0.0.0.0:800,255.255.255.255:800,UDP Ben, I haven't a clue. 800 TCP mdbs_daemon 800 UDP mdbs_daemon http://www.robertgraham.com/pubs/firewall-seen.html http://www.robertgraham.com/pubs/firewall-seen.html#3.6 http://www.robertgraham.com/pubs/firewall-seen.html#3.2 -- ...

PB 5.0.4 and ASA 6.0.3 with ODBC 3.0.28.xxx
Hi, I've tried applying ODBC 3.0.28 over the 3.0.51 version from ASA 6.0.3 and still have problems, but this time it's the "no catalogue tables" and "xxx has no columns" when opening a table. No database access is successful. I've applied the PB 5.0.4 EBF #3 from the support library too. Please help. Thanks and regards, Andre Lipinski hello... I'm facing the same problem but my PB is version 6.5.1 Any solution yet from sybase pertaining to the problem........ Thanks a lot Andre Lipinski <AndreL@globalserve.net> wrote in messa...

Upgrading 4.0 to 5.0 then 6.0 or go straight to 6.0
Hi All, I think the subject speaks for itself Thanks in advance Mustafa You should have no trouble going straight to 6 from 4. Once you do this, go back and get rid of the obsolete function calls. -- Regards, Millard[TeamPowersoft] -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ mf3@gatesys.com Co-Author of PowerBuilder 5.0: Object Oriented Design and Development McGraw-Hill, ISBN 0-07-024469-3 Co-Author of PFC Professional Reference (Block, Brown, Gasin, Green & Tauber) McGraw-Hill, 0-07-913267-7 -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+...

1.5.0.0.3 vs 1.5.0.0.4
I have had numerous difficulties with FF 1.5.0.0.4, in particular, some sites often just hang when I click on links. A particularly bad site is Dell http://www.dell.com/, which - when I try to configure a computer - gets all kinds of "waiting for dell" status bar messages. I tried it with a clean profile, to no avail. It works flawlessly with IE. I downloaded fresh copies of 1.5.0.3 and 1.5.0.4 with the intent of uninstalling the latter and then trying the former. *The uninstall process hung*. So I installed 1.5.0.3 on top of 1.5.0.4. The Dell site now works fl...

substrating(0, 4) and substrating(0, 3) run but (0,5) or (0,17) doesnt run.. length is 27.. what can problem be ?
hi  substrating(0, 4) and substrating(0, 3) run but (0,5) or (0,17) doesnt run.. length is 27.. what can problem be ? (my min record length is 4) my code is below and substrating have underline... error msg releated to lenght when it doesnt run <asp:hyperlink id="HyperLink1" runat="server" Width="120px" Text='<%# IIF(Eval("ilanbasligi").ToString().Trim().Length< 19, Eval("ilanbasligi").ToString().Substring(0,Eval("ilanbasligi").ToString().Trim().Length), Eval("ilanbasligi").ToString().Substring(0,4)) %...

63.0.0.0.0/255..0.0.0
Has anyone ever heard of this or know where it goes to.It was asking permission to act as a server? Thanks in advance for any help. "pb" <nothing@nomail.com> wrote in message news:9pa1u4$38b$1@news.grc.com... > Has anyone ever heard of this or know where it goes to.It was asking > permission to act as a server? Thanks in advance for any help. If it shows in your firewall log, can you post a copy of it? -- � -- Robert grc.com forum FAQ - http://grc.com/discussions.htm grc.com forum quick reference - http://grc.com/nntpquickref.htm grc.com forum disclaim...

Using PB5.0.3(32bit) and PB 6.0 on the same development NT 4.0 PC
To whom it may concern, Help please if you can! When PB6.0 was installed on a PC (running NT4.0) that was in use as a PB5.03 (32bit) development workstation an apparent problem arose: connectivity to MS SQL Server 6.5 from PB5 was lost. What follows is the error message that is displayed when one attempts to connect to a db: PB050.exe - Bad Image The application or DLL c:\Program Files\Common Files\Powersoft Shared\pbmss050.dll is not a valid Windows NT image. Please check this against your installation diskette. The dll in question was reinstalled and connectivity ...

Bugfixes for PB 6.0? Back from 6.0 to 5.0?
Hi there, since there are so many troubles with PB 6.0, does anyone know if there are any bugfixes for PB 6.0 out yet or even planned for the NEAR future? Is there a way to migrate back from PB 6.0 to PB 5.0.0x? Regards, * gerald * You sound pretty upset - if you don't mind me asking what are these troubles you are having? Gerald Znidaric wrote in message <34C86F5A.778A0197@mgm-edv.de>... >Hi there, > >since there are so many troubles with PB 6.0, does anyone know if there >are any bugfixes for PB 6.0 out yet or even planned for the NEAR future? ...

New versions after 1.5.0.12 2.0.0.3 and 2.0.0.4 do not work properly
Name: Jelle van Buuren Email: jelleatvan-buurendotnet Product: Firefox Summary: New versions after 1.5.0.12 2.0.0.3 and 2.0.0.4 do not work properly Comments: Helleo, I'm sorry to say I am not a webdeveloper expert at all, just a loyal and up till now satisfied daily user. I got lost in your official bug-reports-system, so had to do it this way. I don't even know if my problem can be called a bug, but please take a look to f.i. www.nbrecords.com or www.ns.nl through the new browser FF 2.0 etc. and then do so through FF 1.5.0.12 or IExplorer and you will notice immedi...

IP Address 0.0.0.0.0
Some Agent which crosses proxy (MS ISA proxy) are register to the database with 0.0.0.0. When the agent send a request to the server for register, the field ContactAddress has 0.0.0.0 .0 The same PC - Agent without passing a proxy (another location) send a good ContactAdress IP when it register to the server. (Proxy or not) how agent defined addresses IP before to send for registration ? (Locally, with a service network, patchlink network) christian Astinx, can you post the agent update log? -- Shaun Pond PatchLink Update Agent.log 2006/10/23 10:45:14.033...

!27.0.0.1 vs. 0.0.0.0
I can use any number of tools to see what ports I have listening and/or connected. But among the *Listening* ports, some are 127.0.0.1 and some are 0.0.0.0. What is the difference between 127.0.0.1 and 0.0.0.0 ? Since I've got both - there MUST be a difference. Thanks, Alan 0.0.0.0 stands for all interfaces (example: yourIPaddress,127.0.0.1-127.254.254.254) 127.0.0.1 stands for local interface only (127.0.0.1) > 0.0.0.0 stands for all interfaces > (example: yourIPaddress,127.0.0.1-127.254.254.254) > > 127.0.0.1 stands for local interface only (127....

PB 4.0.03 & PB 6.0.0 issues
I HAVE TWO QUESTIONS READING PB PRODUCTS: 1. WE HAVE USED PB 4.0.03 ENTERPRISE FOR YEARS NOW, ARE THERE PATCHES FOR Y2K CONCERNS THAT WE CAN DOWNLOAD? 2. WE HAVE ALSO PB 6.0.0 PROFESSIONAL, AND ENCOUNTERED SOME ODBC 4.0 GLITCHES RELATING TO MS-ACCESS 97 ("... Program type out of range ..."), ARE THERE PATCHES ALSO FOR THESE CONCERNS AND Y2K ISSUES. I read a response pointing where to find the different patches. I did not see though any patches specific to PB 4.0.03 and PB 6.0.0. I would great...

Netware 5.1 to 6.0 upgrade with zen 3.0 to 4.0 upgrade
Wondering if anyone has any suggestions or experience with this scenario? We have 3 Netware 5.1 sp6 one with zenworks 3.0. We are going to upgrade all servers to Netware 6.0sp5 and zen 4.0. What should be done first....netware or zen upgrade? Any input on the sp's of either? Do all servers have to be at the same netware version? IE. can I upgrade just the zen server to netware 6.0 and leave the master at 5.1? Any guidance would be great! Thanks, Alex Miller On Fri, 21 Jan 2005 13:58:34 +0000, Alex Miller wrote: > What should be done first....netware or ze...

Firefox 2.0.0.6 Reverts back to 2.0.0.5 reinstalls 2.0.0.6, wipes out user settings
Firefox is turning into a piece of crap. First, there is only 1 profile, the default profile. Second, after the first 2.0.0.6 update wiped out the profile settings (again), the automatic check for updates was turned off. This morning the customized profile settings went MIA again, Firefox decided it was version 2.0.0.5 (per the help, about firefox) and automatically downloaded 2.0.0.6; even though 2.0.0.6 had already been installed on July 31. It now thinks it is 2.0.0.6, the home page and other profile settings have been reset, and automatic updates turned off for everyt...

PowerBuilder 5.0 to 5.0.0.2
I hope this the correct venue for this question. I have a fresh install of PB 5.0 and I need to upgrade it to 5.0.0.2. I have found plenty of reference/downloads to 5.0.0.4 on the sybase website, but I need to go from 5.0 to 5.0.0.2. Where can I download the correct patch/upgrade? Thanks 5.0.0.2 is no longer available. You can choose between 5.0.03 (bug infested) and 5.0.04 (stable). -- pbm_hopethishelps, Roy Kiesler [TeamSybase] Sybase Developer Network (SDN) - http://sdn.sybase.com MySybase - http://my.sybase.com "Dwayne Bordelon" <dwayne.bordelon@shawinc...

Firefox 2.0.0.3 and 2.0.0.4
In order to fix a small number of serious regressions, we are looking to do a very quick 2.0.0.3/1.5.0.11 release to pick up some fixes for recent regressions. 2.0.0.4/1.5.0.12 will be the next regular security/stability releases. 2.0.0.3 blockers https://bugzilla.mozilla.org/buglist.cgi? keywords_type=nowords&keywords=fixed1.8.1.3 +verified1.8.1.3&field0-0-0=flagtypes.name&type0-0-0=equals&value0-0-0=b locking1.8.1.3%2B&order=map_assigned_to.login_name,bugs.bug_id We are going to be looking at nominations over the next few days, based on the follo...

PB 5.0.04 on NT 4.0 running MS SQL Server 7.0?
Anyone running PB 5.0.04 on MS SQL 7.0? We're running against MS SQL 6.5 and are considering upgrading to take advantage of some of the new features. Are there new SQL drivers available or required? TIA, pat yuen pyuen@carmafinancial.com 5.0.04 doesn't work with SQL7, you'll need to upgrade to PB 6.5.1 or 7.0 Simon Pat Yuen wrote in message ... >Anyone running PB 5.0.04 on MS SQL 7.0? We're running against MS SQL 6.5 >and are considering upgrading to take advantage of some of the new features. >Are there new SQL drivers available or required?...

Connection of PB 6.0 to SQL Server 7.0 & Version B/W PB 6.0 and PB 7.0
Can anyone tell me about connecting PB 6.0 to SQL Server 7.0. Please remember we are not planning to upgrade both software. When I was trying to connect PB 6.0 to SQL Server 7.0, error occurred " SQLSTAT 1003". OS=NT 4.0 Server PB=6.0 Enterprise Edition SQL SERVER=7.0 Corporate Edition I also want to know the versions between PB 6.0 to PB 7.0 If your are using the ODBC, which I assume you are, include Disablebind=1 in your DBParm. If your deployment environment is also NT, you will have to turn SQLSPY=1 using PFC services. Autocommit=FALSE and SetTransObject() ra...

[ID 20000315.018] OK: perl v5.6.0 +v5.6.0-RC2 on MSWin32-x86 4.0, MSVC 5.0
This is a success report for perl from fisherm@tce.com, generated with the help of perlbug 1.27 running under perl v5.6.0. Perl reported to build OK on this system. For some unknown reason, t/io/fs.t fails tests 14, 16, 19, 28 when running under the harness ("nmake test"), but runs fine standalone. I'm on NTFS, if that makes a difference. --- Site configuration information for perl v5.6.0: Configured by FisherM at Wed Mar 15 13:32:21 2000. Summary of my perl5 (revision 5 version 6 subversion 0) configuration: Platform: osname=MSWin32, osvers=4.0, archna...

Sending proxy ID type 4 0.0.0.0/0.0.0.0 --How can I populate these BM3.8
I have narrowed a previous issue to this problem. My IPsec compliant firewall (PIX) expects these to have values (I'm assuming that they should contain the IP and subnets of the BM38 server and the other firewall) populated. The IKE screen on the BM3.8 server reports "Sending proxy ID type 4 0.0.0.0/0.0.0.0". The PIX reports "testpix(config)# IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) dest= 192.168.1.1, src= 192.168.1.2, dest_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), src_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), protocol= ESP, t...

Help me about connecting PB 6.0 to SQL Server 7.0 & Versions B/W PB 6.0 and PB 7.0
Can anyone tell me about connecting PB 6.0 to SQL Server 7.0. Please remember we are not planning to upgrade both software. When I was trying to connect PB 6.0 to SQL Server 7.0, error occurred " SQLSTAT 1003". OS=NT 4.0 Server PB=6.0 Enterprise Edition SQL SERVER=7.0 Corporate Edition I also want to know the versions between PB 6.0 to PB 7.0 I don't believe this is going to be possible without at least upgrading to the latest maintenance release of 6.x. On Mon, 23 Aug 1999 00:59:56 -0700, in powersoft.public.powerbuilder.database Abdul Lateef <abdul_lat...

PB 5.0.3 -> 5.0.4
Hi! Is it possible to replace the PB 5.0.3 runtime with the PB 5.0.4 runtime without recompiling the program? TIA Volker I've never had any success doing something like this. No harm experimenting, but I'd suspect you'd need to recompile. Good luck, Terry [TeamSybase] and Sequel the techno-kitten On Mon, 14 Jun 1999 15:29:31 +0200, "Volker Reher" <vreher@template.de> wrote: >Is it possible to replace the PB 5.0.3 runtime with >the PB 5.0.4 runtime without recompiling the >program? On Mon, 14 Jun 1999 13:47:16 GMT, in...

Running PB 6.0 and PB 5.0 on Same Machine
I would like to start reviewing PB 6.0. Will there be problems if I load on the machine I used for PB 5.0 development? Any tricks or warnings I should know about? >I would like to start reviewing PB 6.0. Will there be problems if I load >on the machine I used for PB 5.0 development? Any tricks or warnings I >should know about? > I haven't seen any problems. The files are all named differently, so there should be no problem. Larry Cermak [Team Powersoft] | Moderator forums.powersoft.com.database Branick Consulting,Inc. | Moderator forums.powersoft.com.pow...

Web resources about - Running PB 3.0, 4.0, 5.0 and 6.0 on same PC - sybase.powerbuilder.general

Running - Wikipedia, the free encyclopedia
This article is about the type of locomotion in humans. For running in horses, see Horse gait . For locomotion in dogs, see Gait (dog) . For ...

Mina Guli: Australian woman running 40 marathons in 49 days in 7 Desert Challenge
A FEW days ago Mina Guli was running on a polar ice cap, it was minus 20 degrees and there was a white out.

Malcolm Turnbull running bad scare campaign over negative gearing, Labor says
Labor says the Prime Minister has contradicted himself while fighting against its negative gearing policy.

90 percent of Android devices are running an outdated OS
According to new research over 90 percent of Android devices are running an out of date version of the OS. In addition, 32 percent of those in ...

9 new battery technologies that ease your fears of running out of juice
Smartphones are becoming more and more sophisticated mobile PCs, yet device makers still haven't figured out how to significantly improve their ...

Lunatics running the asylum @BloggersRus
Lunatics running the asylum by Tom Sullivan The sooner America legalizes marijuana and collectively lights one up, the better. At the risk ...

Trump Starts Talking About Running Mates After Nevada Win
A day after running the tables in the Nevada caucuses, Republican presidential candidate Donald Trump said he'd likely look for someone with ...

***Horse Race LiveWire*** Trump Not Running Ads In Any Super Tuesday States
***Horse Race LiveWire*** Trump Not Running Ads In Any Super Tuesday States

GOP Gov. Brian Sandoval takes himself out of the running for SCOTUS
His decision comes only a day after CBS News confirmed the White House had been vetting him

Apple Watch’s biggest competitor is running into problems
We still don’t have exact sales numbers on the Apple Watch, but something is clearly having a big impact on Fitbit, Apple’s biggest rival in ...

Resources last updated: 2/28/2016 3:12:30 AM