Re:[wxperl-users] wxPerl-0.21 Mac Install Problem #2
> Any help would be appreciated. I think there may be a problem with the=0D
> Installer for Mac. Has anyone successfully installed 0.21 on Mac yet?=0D
if it hangs for you surely there is a problem. The
$1M question is: =
running "wxPerl foo.pl" works for you?
IOW: did the installed hang befor=
e or after completing
___________________________________________________=0ARegala e regalati L=
ibero ADSL: 3 mesi gratis, navighi veloce e scarichi a 1.2 Mega. =0AAbbon=
ati subito senza costi di attivazione su http...[wxperl-users] wxPerl-0.21 Mac Install Problem
The Installer hangs on installing the last stage of wxPerl.pkg:
Running Installer Script
Time Remaining: less than a minute
It sat there for over two hours before I quit the Installer.
Win a castle for NYE with your mates and Yahoo! Messenger
--- David Rogal <firstname.lastname@example.org> wrote:
> The Installer hangs on installing the last stage of wxPerl.pkg:
> Processing wxPerl
> Running Installer Script
> Time Remaining: less than a ...Fwd: wxPerl on the Mac; was: [wxperl-users] Re: problems with wxPerl
>To: Jouke Visser <email@example.com>, firstname.lastname@example.org
>From: Christian Jaeger <email@example.com>
>Subject: wxPerl on the Mac; was: [wxperl-users] Re: problems with wxPerl
>Date: Sun, 30 Sep 2001 23:08:19 +0100
>I'm crossposting this reply to the macosx-perl mailing list because
>there is some interest, too.
Actually I forgot to put the macosx-perl adress on it.
>At 14:02 Uhr +0200 24.9.2001, Jouke Visser wrote:
>>I wondered if anyone yet tried to compile wxPerl on a Mac. If not, I'...Re: [wxperl-users] [ANNOUNCE] wxPerl 0.21
> wxFileOffset is not available in 2.5.2,
> so streams.cpp/streams.h nee=
> #if WXPERL_W_VERSION_GE( 2, 5, 3 )
> ... wxFileOffset ...=0D
Is this the only change required for 2.5.2
___=0ARegala e regalati Libero ADSL: 3 mesi gratis e navighi veloce. 1.2 =
Mega di musica, film, video e sport. =0AAbbonati subito senza costi di at=
tivazione su http://www.libero.it=0A=0A
--- "firstname.lastname@example.org" <email@example.com> wrote:
> > wxFileOffset is not available in 2.5.2,
> > so streams.cpp/streams.h need a
> > #if WXPERL_W_VERSION_GE( 2, 5, 3 )
> > ... wxFileOffset ...
> Is this the only change required for 2.5.2
Looks like (only issue i encountered).
I only tested dll (non)?unicode configuration, all tests passed.
I never test debug version.
Do you Yahoo!?
All your favorites on one personal page � Try My Yahoo!
so far i can see there is no gentoo package for wxperl but even for
is there a reason or lack of activity?
On Fri, 24 Dec 2004 12:48:05 +0100 herbert breunung <firstname.lastname@example.org> wrote:
> so far i can see there is no gentoo package for wxperl but even for ...Re: [wxperl-users] Problem for installing last wxPerl on Windows
The last version of what ?
All the versions I use are the last on=
What can be newer ?
De : email@example.com [mail=
to:firstname.lastname@example.org] De la part de Mattia Barbo=
Envoy=E9 : dimanche 24 d=E9cembre 2006 13:07
=C0 : wxperl-users@lists=
Objet : Re: [wxperl-users] Problem for installing last =
wxPerl on Windows
On Fri, 22 Dec 2006 17:15:36 +0100
"Beule, Franck" =
> D:\Wx-...Re: [wxperl-users] Problem for installing last wxPerl on Windows #2
Is there anyone that can give me a windows binary of wxPerl-0.67 ?
should have been located at http://wxperl.sourceforge.net/download.html
but the last version updated is only 0.26, a one year old version !
's been 3 days I try to compile it and don't find out how to do it.
configuration is :
System : Windows XP
Perl : Active Perl 5.8.8 Buil=
d 819 (last existing version)
wxWidgets version 2.8.0 compiled in all mo=
The error I get is described at the end of the message.
g that I should install Alien::wxWidgets, I tried to do it w...Re:[wxperl-users] Mac OS X / wxPerl / PARl: symlink problems
> Mac OS X Panther 10.3.4
> perl 5.8.1 (came w/OS)
> PAR 0.87
> wxPerl 0.22
> I've been trying to pack a wxperl program=
as a standalone executable
> that will run on systems without perl or =
wx installed. Even when I use
> the -l option to include the wx library=
file, though, running the
> program on anything besides the developmen=
t machine always gives me the
> dyld: ./CDArchiveCalculat=
or can't open library:
> /usr/local/lib/libwx_mac_adv-2.5.3.dylib (No =
such file or direc...Re:[wxperl-users] Re: wxPerl 0.23 release
> Mattia Barbon
> > On Tue, 28 J=
2005 22:44:29 +0200
> > Under Windows
the change in the
default font is to
> > be expected=
> I'm using Fedora
:-) I suppose I
could not be m=
Anyway: the font
change looks like a
vs 2.x ch=
the button width you
r the buttons that
need to be smaller
=0A=0A=0A...Re: [wxperl-users] Re: wxperl
its really time to help more mattia.
things i could offer are beside bug reports is to help to buil a better brwosable doku,
this is one of my long time wish so are so.
"Graciliano M. P." <email@example.com> schrieb am 11.12.04 03:29:27:
> > hey all,
> > I just tried downloading the cvs snapshot, Wx-0.20, Wx-0.19, and Wx-0.18
> > and trying to install them on solaris (without luck). I tried both
> > and wxWidgets-2.5.3.
> > Furthermore, I went to the wikis for more information, and noticed that
> > been spammed, and according to the mailing list, they have been so for the
> > couple weeks or so..
> > So - is wxperl still being supported? And could someone point me in the
> > of a wxPerl that can compile on solaris?
> I think that for now the work of wxPerl will be much more about make it 100%
> stable in all the plataforms than just wrap new classes, since we already
> have a lot of resources wrapped.
> Mattia is always working and in the other side of the line to answer our
> questions. But I think that now the community that uses wxPerl need to start
> to make much more tests, reports and patches, since now the work can't
> continue to be done alone by Mattia. Of course that we have the folks that
>...[wxperl-users] wxPerl 0.21 uploaded
the official announce will follow later today. I hope
I have not b=
___________________________________=0ALibero ADSL: 3 mesi gratis e navigh=
i a 1.2 Mega, senza costi di attivazione.=0AAbbonati subito su http://www=
...[wxperl-users] [ANNOUNCE] wxPerl 0.21
A new version of wxPerl, the Perl bindings to wxWindows, is out!
You can download the sources from CPAN.
Binary packages for ActivePerl/Win32 6xx and 8xx builds, and Red Hat
Linux are available along with documentation in HTML and MS HTML Help
format from http://wxperl.sourceforge.net/download.html
Changes since the last release:
- Fixed installation of 'wxPerl' command on Mac OS X.
- Fixed running in the embedded case (still requires the
application to call ExitMainLoop at the right places).
- Wrapped wxNavi...[wxperl-users] wxPerl 0.13 problems (again)
Hello to all,
I am currently still having problems installing wxPerl
0.13 on a RedHat 8.0 system with GCC 3.2 and Perl
5.8.0. I have wxGTK 2.4.0 installed as well as the
contrib extras (stc, and others that are required by
wxPerl). However, I am having problems with getting
the tests to work after compiling.
The package compiles fine, but the tests fail at the
STC testing. The Error I get is the follwing:
make: Entering directory
"-MExtUtils::Command::MM" "-e" "test_harness(0,
...Re: [wxperl-users] wxPerl 0.49_01
> There are a few files missing from Wx-0.49_01.tar.gz. (I grabbed it off=
> 1. the whole of directory \ext\media
> 2. \ext\datetime\XS\DateSpan.xsp
> 3. \ext\datetime\XS\TimeSpan.xsp
Fixed. Also fixed the #ifdefs for wxLaunchDefaultBrowser
(it is a bug in xsubpp). 0.49_02 being uploaded to PAUSE as I write.
...[wxperl-users] Problems installing wxperl on debian
Hi, I'm having some issues getting wxperl 0.17 up and running on debian. (I got it
running on windows just fine suprisingly)
I've got the following packages installed
karl@krack:/work/fork2$ dpkg --list '*wx*' | grep ii
ii libwxbase2.4 18.104.22.168 wxBase library (runtime) - non-GUI support c
ii libwxbase2.4-d 22.214.171.124 wxBase library (development) - non-GUI suppo
ii libwxgtk2.4 126.96.36.199 wxWindows Cross-platform C++ GUI toolkit (GT
ii libwxgtk2.4-de 188.8.131.52 wxWindows Cross-platform C++ GUI toolkit (GT
ii wxwin2.4-heade 184.108.40.206 ...[wxperl-users] wxPerl 0.21 prerelease
I will try to upload the Mac DM=
The Windows Unicode version is compiled with
try and report problems.
_____________________________________________=0ALibero ADSL: navighi grat=
is a 1.2 Mega, senza canone e costi di attivazione. =0AAbbonati subito su=
Pulled down and got this failure on make (Linux, wxGTK2-2.5):
/usr/bin/perl /usr/lib/perl5/5.8.1/ExtUtils/xsubpp -noprototypes
-nolinenumbers -typemap /usr/lib/perl5/5.8.1/ExtUtils/...Re:[wxperl-users] wxPerl 0.24
> I hope to have it
Share and enjoy
_____________________________=0A6X velocizzare la tua navigazione a 56k? =
6X Web Accelerator di Libero!=0AScaricalo su INTERNET GRATIS 6X http://ww=
...Re: [wxperl-users] Compile problems for wxPerl 0.10 on OS X 10.1.3
I just downloaded the latest CVS snapshot, and it compiles. However, it doesn't work. I sent Mattia a log of output from `make test`, so maybe some workaround can be done...
--- Jouke Visser <firstname.lastname@example.org> wrote:
>On Tue, Mar 12, 2002 at 08:56:18PM +0100, Mattia Barbon wrote:
>> > Hello all. As I said before, I compiled and installed wxMac 2.3.2 without problems. The samples look nice :). However, I had problems compiling wxPerl 0.08. Mattia sent me a workout, and that didn't work. 0.10 came around, and I tried that. Still doesn't work, but the wx...[wxperl-users] WxPerl installation
Hi - I've been having an extremely difficult time installing WxPerl on
my debian stable (sarge). There are no instructions on how to do that
nor are there any recent .deb files (do please consider adding them to
the sf.net repository). I even tried to get the files directly from
CPAN and that too died due to some dependency issues (directly from CPAN).
Note that the CPAN page,
states that one should 'Please see docs/install.txt in source package'
which is not intuitive since there are no directions of what package
that ...Re: [wxperl-users] Plans for wxPerl 0.23, wxWidgets 2.6.0
> Mattia Barbon wrote:
> > I am going to provide only w=
xWidgets 2.6.x releases from now on,
> >and I will consider if I will ke=
ep distributing Perl 5.6.x-enabled
> >binaries. If anybody is willing to=
take the time to compile and relase
> >wxWidgets 2.4.x binaries, I will=
most gratefully grant him/her the
> >appropriate permissions, otherwise=
I will just drop those combination from
> >binary releases (I will keep=
support in the sources).
> If there is anyone who would sti=
ll like sup...Re: [wxperl-users] Ubuntu wxPerl 0.65 with wxWidgets 2.8.0
> I managed to get wxPerl 0.65 to build against the new wxWidgets 2.8.0.
> I used the Ubuntu wxWidgets binaries for 2.8.0
> (http://www.wxwidgets.org/downloads/), but had a few problems with
> mike@mbs:~/downloads/Alien-wxWidgets-0.25$ perl Build
> 'animate' library not found at inc/My/Build/Any_wx_config.pm line 141.
> 'deprecated' library not found at inc/My/Build/Any_wx_config.pm line 14=
> So I added this line to inc/My/Build/Any_wx_config.pm:
> next if $k =3D~ m/^animate|deprecated...Re: [wxperl-users] wxPerl 0.25 released
[ sorry for the formatting ]
> Sorry to be the first to po=
st a downer, but I'm still having trouble
> building my application usin=
g perlapp if I use any 2.6 version of Wx :(
Which Windows version is=
> I've narrowed it down to Wx::Html. If I do a 'use Wx::Html' it=
> build and I get the error dialog shown at
Another user (with an older wxPerl v=
a crash on exit on Win95 with PerlApp. No idea if this=0D
Matti...[wxperl-users] problem building wxperl 0.20
I am trying to build WxPerl 0.20 and having a problem. I have Arch Linux
installed with WxWidgets (WxGTK) 2.4.2 and Perl 5.8.5. Running "perl
Makefile.PL" works fine. Here's the output from running "make". Any help
you can provide would be much appreciated.
sweisman@lexicon Wx-0.20]$ make
/usr/bin/perl script/copy_files.pl files.lst
cp cpp/overload.h blib/lib/Wx/cpp/overload.h
cp cpp/wxapi.h blib/lib/Wx/cpp/wxapi.h
cp cpp/constants.h blib/lib/Wx/cpp/constants.h
cp cpp/helpers.h blib/lib/Wx/cpp/helpers.h
cp cpp/setup.h...[wxperl-users] Problem for installing last wxPerl on Windows
for the moment, I've used the Windows compiled version of wxPerl
But the vers=
ion available is only 0.26.
I need to install the last 0.67 version. U=
nfortunately, this version is
only available with sources. I need to com=
pil them by myself.
I've downloaded and installed on d:\perl
I've downloaded and compiled at ever=
y possible modes wxWidget 2.8.0 on
d:\wxWidgets-2.8.0 with Microsoft Vis=
ual C++ 6.0
I've downloaded and unziped Wx-0.67 on ...RE: [wxperl-users] Plans for wxPerl 0.23, wxWidgets 2.6.0 #2
> I tried to compile wxPerl CVS against 2.6.0 and I got the =
errors as below.
> I am compiling on WinXP using MSVC6. Should this =
work? Have others
> successfully compiled?
Yes, but with MSVC 5 and=
GCC (various versions), not MSVC 6.
Are you up to date with MSVC servic=
> C:\Perl\bin\perl.exe C:\Perl\lib\ExtUtils/xsubpp =
> Grid.c(390) : warning C4189: 'CLAS=
S' : local variable is initialized but not
> Grid.c(464) :=
fatal error C1001: INTERNA...