RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources #3

Dear Mattia,
Forgot to say that I did a=20

nmake realclean

before the=20
perl makefile.pl
nmake

in order to clean things up from the 2.2.7 build.

James


> -----Original Message-----
> From: Mattia Barbon [mailto:mbarbon@dsi.unive.it]
> Sent: 05 November 2001 22:19
> To: James Lavery
> Cc: wxperl-users@lists.sourceforge.net
> Subject: RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and
> usingXML resources
>=20
>=20
> > Dear Mattia,
> > Thanks for the information - it all makes sense. =20
> >=20
> > However, I tried downloading the latest snapshot from
> > http://wxperl.sourceforge.net/snapshot/wxPerl.zip, and I=20
> get the same
> > "'SetString' : is not a member of 'wxRadioBox'" error.  Am=20
> I getting=20
> the
> > correct snapshot?  Wx.pm in the snapshot has a version of 0.08.
> My fault ( you'll notice I keep saying this quite often... )
> There were other changes I forgot to check.
> The current CVS/snapshot should compile OOTB
>=20
> ( BTW, don't forget to
>=20
>   cd $WXWIN\contrib\src\xrc
>   nmake -f makefile.vc
>=20
>   before building wxPerl, to build xrc )
>=20
> Hope this helps
> Mattia
>=20
>=20

0
james (30)
1/23/2014 1:01:01 AM
perl.wxperl.users 3070 articles. 0 followers. Follow

0 Replies
371 Views

Similar Articles

[PageSpeed] 11

Reply:

Similar Artilces:

RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources #2
Dear Mattia, Thanks for the info - I'm getting further! I've built xrc using: nmake -f makefile.vx FINAL=3D1 to create wxxrc.lib (rather than wxxrcd.lib), and this worked fine. However, when I try building wxPerl, using: nmake=20 perl Makefile.PL nmake=20 I get the following errors (I've snipped sections out to give the gist, as it goes on quite a bit): link -out:..\..\blib\arch\auto\Wx\XRC\XRC.dll -dll -nologo -nodefaultlib -release -libpath:"c:\perl\5.6.1\lib\MSWin32-x86-multi-thread\CORE" -machine:x86 XRC.obj ..\..\blib\arch\auto\Wx\Wx.lib C:\p...

RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources
Dear Mattia, Thanks for the information - it all makes sense. =20 However, I tried downloading the latest snapshot from http://wxperl.sourceforge.net/snapshot/wxPerl.zip, and I get the same "'SetString' : is not a member of 'wxRadioBox'" error. Am I getting the correct snapshot? Wx.pm in the snapshot has a version of 0.08. Thanks, James > Dear Mattia, > Thanks for the information - it all makes sense. > > However, I tried downloading the latest snapshot from > http://wxperl.sourceforge.net/snapshot/wxPerl.zip, and I get the sam...

RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources #4
Dear Mattia, Excellent! I've got things built, now I just have to get to grips with resources... Thanks a lot, James > -----Original Message----- > From: Mattia Barbon [mailto:mbarbon@dsi.unive.it] > Sent: 06 November 2001 15:34 > To: James Lavery > Cc: wxperl-users@lists.sourceforge.net > Subject: RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and > usingXML resources >=20 >=20 > > Dear Mattia, > > Thanks for the info - I'm getting further! > >=20 > > I've built xrc using: > > nmake -f makef...

[wxperl-users] Building wxPerl with wxWindows 2.3.1, and using XML resources
Hi All, I'm new to wxPerl and wxWindows, (but not to Perl...), and am a bit confused about a couple of things... I want to use XML resource files with wxPerl, and understand that this is only available with the 'unstable' 2.3.1 version of wxWindows. I've downloaded and built this with no problems, into c:\wx2.3.1\wx23_1.dll. Three questions: 1. How do I rebuild wxPerl to use this version of wxWindows? =20 I've tried editing build\nmake.mak to change WXWIN to c:\wx2.3.1, and rebuilding the makefile for wxPerl and remaking, but I get the errors: Controls....

Re: [wxperl-users] wxPerl binary for wxWindows 2.3.x?
>Of course, I 'm probalby caught between a rock and a hard place slightly - >if I want the extra functionality/fixes in wxWindows 2.3.3, I'll have to >take the potential hit on new bugs! I've been using 0.11b6 for some weeks and it's stable on my machine. I'm going to send my next preview version to a few people for testing in the day or two as well. Mattia, let me know before you release 0.11-stable, so I send you the latest STC stuff. I'm updating the sample/demo script at the moment. Marcus ...

Re: [wxperl-users] wxPerl-0.20 Source Build on OSX.3.5/wxPython 2.5.2.7
> MakeMaker 6.21. Sorry. Below I meant to write: "If 6.21, downgrad= e to 6.17 or use the snapshot at makemaker.org." ^^^^ Regards=0D = Mattia > On Aug 18, 2004, at 11:56 PM, mattia.barbon@libero.it wrote:=0D = > ''' > >> Next, Makemaker is building the root Makefile with both blibd= irs: and > > > > Which MakeMaker version? If 6.22, downgrade to 6.17 = or > > use the snapshot at makemaker.org. > > > ... > > Thanks! > > = Mattia > > > > > > > > > &g...

Re:[wxperl-users] wxPerl-0.20 Source Build on OSX.3.5/wxPython 2.5.2.7
> I've just built wxPerl 0.20 as indicated in the subject, and I had a =0D = > few issues: > > First, the syntax for wx-config used in > Any_wx_c= onfig.pm::get_core_libs_25 seems to have changed: Instead of > "--libs=3D= list" it's now "--libs list". yes, it was changes in wxWidgets CVS l= ast week. > Next, Makemaker is building the root Makefile with both b= libdirs: and Which MakeMaker version? If 6.22, downgrade to 6.17 or= use the snapshot at makemaker.org. > blibdirs::. That produces an = error. Cha...

[wxperl-users] wxPerl 0.11 *beta* + wxWindows 2.3.3 *snapshot* available
This is a Win32-only binary snapshot. Use only if you know you need it. http://wwwstud.dsi.unive.it/~mbarbon/wx/ Regards mattia ...

[wxperl-users] wxPerl-0.20 Source Build on OSX.3.5/wxPython 2.5.2.7
I've just built wxPerl 0.20 as indicated in the subject, and I had a few issues: First, the syntax for wx-config used in Any_wx_config.pm::get_core_libs_25 seems to have changed: Instead of "--libs=list" it's now "--libs list". Next, Makemaker is building the root Makefile with both blibdirs: and blibdirs::. That produces an error. Changing the single colon to a double colon fixes the problem, but it has to be done every time one runs Makefile.PL. I couldn't figure out where to fix it in the MakeMaker files. Last, could you take out the...

[wxperl-users] `make test` fails, wxperl CVS w/ wxGTK-2.3.3
`make test` doesn't work using wxGTK-2.3.3 on Linux: t/08_ovl_func.........Bareword "Wx::Pen::newBitmap" not allowed while "strict subs" in use at t/08_ovl_func.t line 485. Execution of t/08_ovl_func.t aborted due to compilation errors. # No tests run! I found in XS/Pen.xs that the xsub for `newBitmap' is conditionally compiled: #if defined( __WXMSW__ ) || defined( __WXPERL_FORCE__ ). (I guess __WXPERL_FORCE__ is an undocumented debugging thing, and I use Linux, so `newBitmap' didn't get wrapped.) In t/08_ovl_func.t, there is...

RE: [wxperl-users] Re: wxValidator available via wxPerl #3
> wxTextValidator is OK for Perl, while wxGenericValidator does > 1 - use overloading > wxGV construtor takes one of a int/bool/string/integer array > (C++) pointer ( think Perl references ), but in Perl > int/string/bool map to scalar. Yes, I think a Perl-implemented GenericValidator can just take the address of the variable to/from which to deposit/get data, and can handle it appropriately internally by checking the reference type. > 2 - there is no NumericValidator ( or whatever you want to call it ) > one that does a text->number conversio...

Re: [wxperl-users] Compile problems for wxPerl 0.10 on OS X 10.1.3
I just downloaded the latest CVS snapshot, and it compiles. However, it doesn't work. I sent Mattia a log of output from `make test`, so maybe some workaround can be done... Matt --- Jouke Visser <jouke@pvoice.org> wrote: >On Tue, Mar 12, 2002 at 08:56:18PM +0100, Mattia Barbon wrote: >> > Hello all. As I said before, I compiled and installed wxMac 2.3.2 without problems. The samples look nice :). However, I had problems compiling wxPerl 0.08. Mattia sent me a workout, and that didn't work. 0.10 came around, and I tried that. Still doesn't work, but the wx...

[wxperl-users] Make Test failures on wxPerl 0.21 & wxPython 2.5.3.1 GTK
I've installed 0.21 on my laptop (Mandrake 10.0) and built it against a custom build of wxWidgets 2.5.3 from the wxPython 2.5.3.1 distro. Seems to work OK, except that tests 1 and 2 hang after completing the last test and test 8 segfaults at test 121. Oh, and the NotebookSizer thing kills the demo program... Regards, John Ralls ...

RE: Re[4]: [wxperl-users] [OT, or maybe not?] wxPerl T-Shirt? #3
OK, so combining Jouke's idea with mine, I come up with: The ASCII art camel at the top should be created by carefully laying out = obfuscated Wx Perl code that, when run, creates an outline of a = graphical camel in a window. The below graphics are the camel as it = displays on the various OS flavors . . . --Toby Ovod-Everett -----Original Message----- From: Ovod-Everett, Toby=20 Sent: Tuesday, July 29, 2003 8:41 AM To: wxperl-users@lists.sourceforge.net Subject: RE: Re[4]: [wxperl-users] [OT, or maybe not?] wxPerl T-Shirt? Extending this idea, we could hav...

Web resources about - RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources #3 - perl.wxperl.users

O'Reilly Open Source Convention 2007 • July 23-27, 2007 • Portland, Oregon
O'Reilly Open Source Convention 2007 - July 23-27, 2007 - Portland, Oregon

Resources last updated: 1/28/2016 3:08:27 PM