RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources

Dear Mattia,
Thanks for the information - it all makes sense. =20

However, I tried downloading the latest snapshot from
http://wxperl.sourceforge.net/snapshot/wxPerl.zip, and I get the same
"'SetString' : is not a member of 'wxRadioBox'" error.  Am I getting the
correct snapshot?  Wx.pm in the snapshot has a version of 0.08.

Thanks,

James

0
james (30)
1/23/2014 1:01:01 AM
perl.wxperl.users 3070 articles. 0 followers. Follow

1 Replies
488 Views

Similar Articles

[PageSpeed] 6

> Dear Mattia,
> Thanks for the information - it all makes sense.  
> 
> However, I tried downloading the latest snapshot from
> http://wxperl.sourceforge.net/snapshot/wxPerl.zip, and I get the same
> "'SetString' : is not a member of 'wxRadioBox'" error.  Am I getting 
the
> correct snapshot?  Wx.pm in the snapshot has a version of 0.08.
My fault ( you'll notice I keep saying this quite often... )
There were other changes I forgot to check.
The current CVS/snapshot should compile OOTB

( BTW, don't forget to

  cd $WXWIN\contrib\src\xrc
  nmake -f makefile.vc

  before building wxPerl, to build xrc )

Hope this helps
Mattia


0
mbarbon
1/23/2014 1:01:01 AM
Reply:

Similar Artilces:

RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources #2
Dear Mattia, Thanks for the info - I'm getting further! I've built xrc using: nmake -f makefile.vx FINAL=3D1 to create wxxrc.lib (rather than wxxrcd.lib), and this worked fine. However, when I try building wxPerl, using: nmake=20 perl Makefile.PL nmake=20 I get the following errors (I've snipped sections out to give the gist, as it goes on quite a bit): link -out:..\..\blib\arch\auto\Wx\XRC\XRC.dll -dll -nologo -nodefaultlib -release -libpath:"c:\perl\5.6.1\lib\MSWin32-x86-multi-thread\CORE" -machine:x86 XRC.obj ..\..\blib\arch\auto\Wx\Wx.lib C:\p...

RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources #3
Dear Mattia, Forgot to say that I did a=20 nmake realclean before the=20 perl makefile.pl nmake in order to clean things up from the 2.2.7 build. James > -----Original Message----- > From: Mattia Barbon [mailto:mbarbon@dsi.unive.it] > Sent: 05 November 2001 22:19 > To: James Lavery > Cc: wxperl-users@lists.sourceforge.net > Subject: RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and > usingXML resources >=20 >=20 > > Dear Mattia, > > Thanks for the information - it all makes sense. =20 > >=20 > > Howev...

RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources #4
Dear Mattia, Excellent! I've got things built, now I just have to get to grips with resources... Thanks a lot, James > -----Original Message----- > From: Mattia Barbon [mailto:mbarbon@dsi.unive.it] > Sent: 06 November 2001 15:34 > To: James Lavery > Cc: wxperl-users@lists.sourceforge.net > Subject: RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and > usingXML resources >=20 >=20 > > Dear Mattia, > > Thanks for the info - I'm getting further! > >=20 > > I've built xrc using: > > nmake -f makef...

[wxperl-users] Building wxPerl with wxWindows 2.3.1, and using XML resources
Hi All, I'm new to wxPerl and wxWindows, (but not to Perl...), and am a bit confused about a couple of things... I want to use XML resource files with wxPerl, and understand that this is only available with the 'unstable' 2.3.1 version of wxWindows. I've downloaded and built this with no problems, into c:\wx2.3.1\wx23_1.dll. Three questions: 1. How do I rebuild wxPerl to use this version of wxWindows? =20 I've tried editing build\nmake.mak to change WXWIN to c:\wx2.3.1, and rebuilding the makefile for wxPerl and remaking, but I get the errors: Controls....

Re: [wxperl-users] wxPerl binary for wxWindows 2.3.x?
>Of course, I 'm probalby caught between a rock and a hard place slightly - >if I want the extra functionality/fixes in wxWindows 2.3.3, I'll have to >take the potential hit on new bugs! I've been using 0.11b6 for some weeks and it's stable on my machine. I'm going to send my next preview version to a few people for testing in the day or two as well. Mattia, let me know before you release 0.11-stable, so I send you the latest STC stuff. I'm updating the sample/demo script at the moment. Marcus ...

Re:[wxperl-users] wxPerl-0.20 Source Build on OSX.3.5/wxPython 2.5.2.7
> I've just built wxPerl 0.20 as indicated in the subject, and I had a =0D = > few issues: > > First, the syntax for wx-config used in > Any_wx_c= onfig.pm::get_core_libs_25 seems to have changed: Instead of > "--libs=3D= list" it's now "--libs list". yes, it was changes in wxWidgets CVS l= ast week. > Next, Makemaker is building the root Makefile with both b= libdirs: and Which MakeMaker version? If 6.22, downgrade to 6.17 or= use the snapshot at makemaker.org. > blibdirs::. That produces an = error. Cha...

Re: [wxperl-users] wxPerl-0.20 Source Build on OSX.3.5/wxPython 2.5.2.7
> MakeMaker 6.21. Sorry. Below I meant to write: "If 6.21, downgrad= e to 6.17 or use the snapshot at makemaker.org." ^^^^ Regards=0D = Mattia > On Aug 18, 2004, at 11:56 PM, mattia.barbon@libero.it wrote:=0D = > ''' > >> Next, Makemaker is building the root Makefile with both blibd= irs: and > > > > Which MakeMaker version? If 6.22, downgrade to 6.17 = or > > use the snapshot at makemaker.org. > > > ... > > Thanks! > > = Mattia > > > > > > > > > &g...

[wxperl-users] wxPerl 0.11 *beta* + wxWindows 2.3.3 *snapshot* available
This is a Win32-only binary snapshot. Use only if you know you need it. http://wwwstud.dsi.unive.it/~mbarbon/wx/ Regards mattia ...

[wxperl-users] wxPerl-0.20 Source Build on OSX.3.5/wxPython 2.5.2.7
I've just built wxPerl 0.20 as indicated in the subject, and I had a few issues: First, the syntax for wx-config used in Any_wx_config.pm::get_core_libs_25 seems to have changed: Instead of "--libs=list" it's now "--libs list". Next, Makemaker is building the root Makefile with both blibdirs: and blibdirs::. That produces an error. Changing the single colon to a double colon fixes the problem, but it has to be done every time one runs Makefile.PL. I couldn't figure out where to fix it in the MakeMaker files. Last, could you take out the...

Re: [wxperl-users] Re: wxperl
yes !! its really time to help more mattia. things i could offer are beside bug reports is to help to buil a better brwosable doku, this is one of my long time wish so are so. herbert "Graciliano M. P." <gmpowers@terra.com.br> schrieb am 11.12.04 03:29:27: > > > hey all, > > > > I just tried downloading the cvs snapshot, Wx-0.20, Wx-0.19, and Wx-0.18 > > and trying to install them on solaris (without luck). I tried both > wxAll-2.4.2 > > and wxWidgets-2.5.3. > > > > Furthermore, I went to the wikis for more in...

RE: [wxperl-users] Re: wxValidator available via wxPerl #2
Dear Mattia, Thanks - this works a treat! I was so close... Anyway, now I'm up and running. I had noticed the 'Attempt to free unreferenced...' error - will await a fix. Now that I've got things working, what do you suggest/would you like? I feel that validators are the way to go when it comes to transferring data to/from controls (rather than explicit GetValue/SetValue calls all over the place) - I have had to implement a similar concept (though not as elegant) in a very large Perl/Tk application which we have developed. I see that you think we should create...

RE: [wxperl-users] Re: wxValidator available via wxPerl #3
> wxTextValidator is OK for Perl, while wxGenericValidator does > 1 - use overloading > wxGV construtor takes one of a int/bool/string/integer array > (C++) pointer ( think Perl references ), but in Perl > int/string/bool map to scalar. Yes, I think a Perl-implemented GenericValidator can just take the address of the variable to/from which to deposit/get data, and can handle it appropriately internally by checking the reference type. > 2 - there is no NumericValidator ( or whatever you want to call it ) > one that does a text->number conversio...

Re:[wxperl-users] Static wxPerl build
> For distributing a wxPerl application on windows, I would like to > create a static build of the Perl DLL including all of the wxPerl > dlls. Has someone tried this before; is it even possible? Possible: maybe, I do not know. I did never attempt it. Do you need to link wxWidgets DLLs statically, too? It once was possible to link All of Wx::* and wxWidgets in a single Wx.dll, but I removed the support a long time ago. Regards Mattia Monday, February 13, 2006, 9:19:20 PM, you wrote: >> For distributing a wxPerl application on windows, I would like to >...

Re: [wxperl-users] wxPerl on wxX11 ? #2
> --- John Ralls <jralls@ceridwen.fremont.ca.us> wrote: > > > > > On Jul 11, 2006, at 5:31 PM, Sergei Steshenko wrote: > > > > > Hello All, > > > > > > is it possible to compile wxPerl on wxX11 rather than on wxGTK ? > > > > > > If yes, will it be functional ? > > > > > > Thanks, > > > Sergei. > > > > If wxX11 works (which is to say, if you can build it and run some of = > > the samples), then wxPerl will work fine with it. wxPerl doesn't care= ...

Web resources about - RE: [wxperl-users] Building wxPerl with wxWindows 2.3.1, and usingXML resources - perl.wxperl.users

O'Reilly Open Source Convention 2007 • July 23-27, 2007 • Portland, Oregon
O'Reilly Open Source Convention 2007 - July 23-27, 2007 - Portland, Oregon

Resources last updated: 1/15/2016 11:10:14 AM