RE: [perl #31973] Re: "perl 5.8.2 (on Power PC) Can't locate lib .pm - ?" - who is responsible for Power PC perl 5.8.5 port ?

> perl-5.8.2 - came as pre-built binaries - from "free" 
> Arabella (partner of
> Motorola/Freescale) CD-ROM (came with the board) - without support and
> without any documentation (fadsroot). I copied it ("fadsroot 
> directory" from
> that CD-ROM onto the disk drive of my Linux Red Hat 9 Shrike 
> Intel PC (NFS
> server) and my board mounts it as root file system during the booting 
> (this is the intended use of "fadsroot").

ok. let us think those are valid binaries until proven otherwise.

> Apparently there were also some "remnants" of 5.8.0  ...

let use hope those do not mess with your binaries, unless.......

> >You can send binaries directly to me and I can try figuring this out
> 
> This is "scattered" across several directories - should I 
> tar/zip all those
> and send to you (how ? - may be more than 
> e-mail could handle). 

send them by archive to my home address vadim@vkonovalov.ru , and do NOT CC
to p5p list.
I hope that e-mail is reachable for you, lemme know otherwise.



> 
> So there is no "designated porter" dealing with perl on Power 
> PC arch ?

AFAIK people contribute their efforts as they do, no special designated
porters.

Personally, I have some little experience on running perl on PPC, but I
haven't got so far to rebuild recent perl for it.

Best regards,
Vadim.
0
vkonovalov
10/15/2004 2:19:02 PM
perl.perl5.porters 47902 articles. 1 followers. Follow

5 Replies
759 Views

Similar Articles

[PageSpeed] 45

>First, tell us how you get that perl-5.8.2
>You tried to build 5.8.5, but then switched to 582. Is it already-built
>binaries? 

perl-5.8.2 - came as pre-built binaries - from "free" Arabella (partner of
Motorola/Freescale) CD-ROM (came with the board) - without support and
without any documentation (fadsroot). I copied it ("fadsroot directory" from
that CD-ROM onto the disk drive of my Linux Red Hat 9 Shrike Intel PC (NFS
server) and my board mounts it as root file system during the booting 
(this is the intended use of "fadsroot").
Apparently there were also some "remnants" of 5.8.0  ...

I will look again into this CD-ROM to see if I broke any links during
copying (but I doubt that this is the case.

>Is it from some Linux distribution?

I have no idea and Arabella does not answer any questions on that free
CD-ROM.
(I wish I would now - may be from Debian ?).

Then I "ftp"ed 5.8.5 source into "fadsroot directory"  - considering
building it "natively" (after first trying to crosscompile - without
success)  - but am having problems at that.

>You can send binaries directly to me and I can try figuring this out

This is "scattered" across several directories - should I tar/zip all those
and send to you (how ? - may be more than 
e-mail could handle). 

So there is no "designated porter" dealing with perl on Power PC arch ?

Thanks,
Alex

-----Original Message-----
From: Konovalov, Vadim [mailto:vkonovalov@spb.lucent.com]
Sent: Friday, October 15, 2004 3:07 AM
To: Povolotsky, Alexander; 'perl5-porters@perl.org'
Cc: 'vkonovalov@peterstar.ru'
Subject: RE: [perl #31973] Re: "perl 5.8.2 (on Power PC) Can't locate
lib .pm - ?" - who is responsible for Power PC perl 5.8.5 port ?


> So I have ONLY two alternatives:
> 
> 1) Somehow "fix" installed power pc perl 5.8.2 - by adding 
> "missing" or "misplaced" 5.8.2 perl module files
>  (such as lib.pm, Config.pm, etc. ) 

Although generally you need to make proper installation, in this particular
case you could just get things working.

First, tell us how you get that perl-5.8.2
You tried to build 5.8.5, but then switched to 582. Is it already-built
binaries?
Is it from some Linux distribution?

If this is the case, usually it's not hard to make it just work.
Mostly you place your files properly, edit Config.pm, and all should be
working.

You can send binaries directly to me and I can try figuring this out.

> 2) build 5.8.5 natively - who is responsible for Power PC 
> perl  5.8.5 port ?

I don't see binaries at binaries/ports page for PowerPC at
http://www.cpan.org/ports/
This page is somehow outdated however.
0
Alexander
10/15/2004 2:03:50 PM
On Fri 15 Oct 2004 16:19, "Konovalov, Vadim" <vkonovalov@spb.lucent.com> wrote:
> > So there is no "designated porter" dealing with perl on Power 
> > PC arch ?

No, not yet :)

> AFAIK people contribute their efforts as they do, no special designated
> porters.
> 
> Personally, I have some little experience on running perl on PPC, but I
> haven't got so far to rebuild recent perl for it.

I run all perls on PPC with AIX (4.3.3.0 and 5.2.0.0)
No special actions required.

I was not able to build gcc-3.4.1 and/or gcc-3.4.2 on AIX 5.2
I now run gcc-4.0.0 prerelease on AIX 5.2 and have no problems
with bleadperl. (I solved the 64bit issues with gcc on AIX last
week)

-- 
H.Merijn Brand        Amsterdam Perl Mongers (http://amsterdam.pm.org/)
using perl-5.6.1, 5.8.3, & 5.9.x, and 809 on  HP-UX 10.20 & 11.00, 11i,
   AIX 4.3, SuSE 9.0, and Win2k.           http://www.cmve.net/~merijn/
http://archives.develooper.com/daily-build@perl.org/   perl-qa@perl.org
send smoke reports to: smokers-reports@perl.org, QA: http://qa.perl.org


0
h
10/15/2004 2:41:53 PM
I think I've managed to fix some part of it ...

root@192:/bin# perl -V
Summary of my perl5 (revision 5.0 version 8 subversion 2) configuration:
  Platform:
    osname=linux, osvers=2.4.22-xfs, archname=powerpc-linux-thread-multi
    uname='linux vir 2.4.22-xfs #1 sun sep 14 20:26:05 est 2003 ppc gnulinux
'
    config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN
-Dcccdlflags=-f
PIC -Darchname=powerpc-linux -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8.2
-Darc
hlib=/usr/lib/perl/5.8.2 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5
-Dvend
orarch=/usr/lib/perl5 -Dsiteprefix=/usr/local
-Dsitelib=/usr/local/share/perl/5.
8.2 -Dsitearch=/usr/local/lib/perl/5.8.2 -Dman1dir=/usr/share/man/man1
-Dman3dir
=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1
-Dsiteman3dir=/usr/local/
man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs
-Ud_c
sh -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.2 -Dd_dosuid
-des'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBIAN -
fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
    optimize='-O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN
-fno-stric
t-aliasing -I/usr/local/include'
    ccversion='', gccversion='3.3.2 (Debian)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt
    perllibs=-ldl -lm -lpthread -lc -lcrypt
    libc=/lib/libc-2.3.2.so, so=so, useshrplib=true,
libperl=libperl.so.5.8.2
    gnulibc_version='2.3.2'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
    cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'


Characteristics of this binary (from libperl):
  Compile-time options: MULTIPLICITY USE_ITHREADS USE_LARGE_FILES
PERL_IMPLICIT_
CONTEXT
  Built under linux
  Compiled at Nov 15 2003 18:33:54
  @INC:
    /etc/perl
    /usr/local/lib/perl/5.8.2
    /usr/local/share/perl/5.8.2
    /usr/lib/perl5
    /usr/share/perl5
    /usr/lib/perl/5.8.2
    /usr/share/perl/5.8.2
    /usr/local/lib/site_perl
    .
root@192:/bin#
root@192:/bin# perl -v

This is perl, v5.8.2 built for powerpc-linux-thread-multi

Copyright 1987-2003, Larry Wall

Perl may be copied only under the terms of either the Artistic License or
the
GNU General Public License, which may be found in the Perl 5 source kit.

Complete documentation for Perl, including FAQ lists, should be found on
this system using `man perl' or `perldoc perl'.  If you have access to the
Internet, point your browser at http://www.perl.com/, the Perl Home Page.

but 

root@192:/bin# perl -e 'use lib;'

produces no output 

-----Original Message-----
From: Konovalov, Vadim [mailto:vkonovalov@spb.lucent.com]
Sent: Friday, October 15, 2004 10:19 AM
To: Povolotsky, Alexander; 'perl5-porters@perl.org'
Cc: 'vkonovalov@peterstar.ru'; Konovalov, Vadim
Subject: RE: [perl #31973] Re: "perl 5.8.2 (on Power PC) Can't locate
lib .pm - ?" - who is responsible for Power PC perl 5.8.5 port ?


> perl-5.8.2 - came as pre-built binaries - from "free" 
> Arabella (partner of Motorola/Freescale) CD-ROM (came with the board) -
without support and
> without any documentation (fadsroot). I copied it ("fadsroot 
> directory" from that CD-ROM onto the disk drive of my Linux Red Hat 9
Shrike 
> Intel PC (NFS server) and my board mounts it as root file system during
the booting 
> (this is the intended use of "fadsroot").

ok. let us think those are valid binaries until proven otherwise.

> Apparently there were also some "remnants" of 5.8.0  ...

let use hope those do not mess with your binaries, unless.......

> >You can send binaries directly to me and I can try figuring this out
> 
> This is "scattered" across several directories - should I 
> tar/zip all those  and send to you (how ? - may be more than 
> e-mail could handle). 

send them by archive to my home address vadim@vkonovalov.ru , and do NOT CC
to p5p list.
I hope that e-mail is reachable for you, lemme know otherwise.

> 
> So there is no "designated porter" dealing with perl on Power 
> PC arch ?

AFAIK people contribute their efforts as they do, no special designated
porters.

Personally, I have some little experience on running perl on PPC, but I
haven't got so far to rebuild recent perl for it.

Best regards,
Vadim.
0
Alexander
10/15/2004 3:26:50 PM
> I think I've managed to fix some part of it ...
> 
> root@192:/bin# perl -V
> Summary of my perl5 (revision 5.0 version 8 subversion 2) 
> configuration:
>   Platform:
>     osname=linux, osvers=2.4.22-xfs, 
> archname=powerpc-linux-thread-multi
>     uname='linux vir 2.4.22-xfs #1 sun sep 14 20:26:05 est 
> 2003 ppc gnulinux

......

> but 
> 
> root@192:/bin# perl -e 'use lib;'
> 
> produces no output 

it should *not* produce any output.

Congratilations!
You did it mostly by editing Config.pm?

I beleive that adopting existing and working binaries currently easier than
cross-compiling...

Best regards,
Vadim.
0
vkonovalov
10/15/2004 3:45:41 PM
I just put the "correct" Config.pm in its "correct" place 
\
Not that:

> root@192:/bin# perl -V
> Summary of my perl5 (revision 5.0 version 8 subversion 2) 

This "my" above is obviously not me and I do not know who and how has built
it ... ;-)

Thanks to ALL for time to respond and willingness to help - it counts !

Thanks,
Best Regards,
Alex

-----Original Message-----
From: Konovalov, Vadim [mailto:vkonovalov@spb.lucent.com]
Sent: Friday, October 15, 2004 11:46 AM
To: Povolotsky, Alexander; 'perl5-porters@perl.org'
Cc: 'vkonovalov@peterstar.ru'; 'Andrew Dougherty'; Konovalov, Vadim
Subject: RE: [perl #31973] Re: "perl 5.8.2 (on Power PC) Can't locate
lib .pm - ?" - who is responsible for Power PC perl 5.8.5 port ?


> I think I've managed to fix some part of it ...
> 
> root@192:/bin# perl -V
> Summary of my perl5 (revision 5.0 version 8 subversion 2) 
> configuration:
>   Platform:
>     osname=linux, osvers=2.4.22-xfs, 
> archname=powerpc-linux-thread-multi
>     uname='linux vir 2.4.22-xfs #1 sun sep 14 20:26:05 est 
> 2003 ppc gnulinux

......

> but 
> 
> root@192:/bin# perl -e 'use lib;'
> 
> produces no output 

it should *not* produce any output.

Congratilations!
You did it mostly by editing Config.pm?

I beleive that adopting existing and working binaries currently easier than
cross-compiling...

Best regards,
Vadim.
0
Alexander
10/15/2004 4:09:19 PM
Reply:

Similar Artilces:

undef error
When Posting a new bug o got this error. I'm running on a FreeBSD server with apache2, Perl 5.8.6 but not MTA installed. I disable the sendmailnow. but still got the error: "undef error - Can't open sendmail at /usr/local/lib/perl5/5.8.6/CGI/Carp.pm line 314." Radukn, On Thu, 3 Mar 2005 19:25:31 +0200, Radukn <radukn@colibris.ro> wrote: > When Posting a new bug o got this error. > I'm running on a FreeBSD server with apache2, Perl 5.8.6 but not MTA > installed. I disable the sendmailnow. but still got the error: > "undef error - ...

Can't download pdf files: Firefox 3.5.2, MacOS 10.5.8
Name: Sandy Stone Email: sandy-kw-firefoxdot633e95atlaureldotmuqdotorg Product: Firefox Summary: Can't download pdf files: Firefox 3.5.2, MacOS 10.5.8 Comments: Clicking on a link to download any pdf from any website raises the following error box: "Downloading /Volumes/sandy/home/sandy/Documents/Downloads/DMGs and apps/tqzgbwJF.pdf.part /Volumes/sandy/home/sandy/Documents/Downloads/DMGs and apps/tqzgbwJF.pdf.part could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different...

SM2.5 crash
I got those traps when trying to 'Edit as new'(?) a previous sent mail and wanted to change the language via right click in subject line. Was reproduce able a few times but now it works. Maybe I tried to fast switching spell checker? ------------------------------------------------------------ 12-06-2011 21:37:47 SYS3171 PID 006e TID 0001 Slot 0077 P:\SEAMONKEY2\SEA!LRQ.EXE c0000005 14dd6ac8 P1=00000002 P2=0002fffc P3=XXXXXXXX P4=XXXXXXXX EAX=00030064 EBX=00030180 ECX=00030180 EDX=27a22940 ESI=24c5ee88 EDI=24c5ee88 DS=0053 DSACC=f0f3 DSLIM=ffffffff ES=0053...

Urgent problem
Hi, as the subject says, I have a file created by: -------- 8< -------- Summary of my perl5 (revision 5 version 8 subversion 4) configuration: Platform: osname=linux, osvers=2.4.26-ti1211, archname=i386-linux-thread-multi uname='linux kosh 2.4.26-ti1211 #1 sat apr 24 14:46:58 est 2004 i686 gnulinux ' config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=i386-linux -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib...

Smoke [5.8.9] maint-5.8-4-g7d6ecb1 FAIL(F) linux 2.6.32-5-686 [debian] (i686/2 cpu) #2
Automated smoke report for 5.8.9 patch 7d6ecb1f6c7eabec011b66526161fcf678919c99 maint-5.8-4-g7d6ecb1 gateway.bandsman.co.uk: AMD Athlon(tm) Dual Core Processor 4850e (AuthenticAMD 2565MHz) (i686/2 cpu) on linux - 2.6.32-5-686 [debian] using cc version 4.4.5 20100816 (prerelease) smoketime 4 hours 33 minutes (average 15 minutes 11 seconds) Summary: FAIL(F) O = OK F = Failure(s), extended report at the bottom X = Failure(s) under TEST but not under harness ? = still running or test results not (yet) available Build failures during: - = unknown or N/A c...

RE[2]: 5.8.2 and 5.9.0, basic test fails on OpenVMS/VAX 7.3
Craig, > >>t/io/openpid.........................FAILED at test 8 > >>lib/vmsish...........................FAILED at test 25 > > >>Failed 2 test scripts out of 742, 99.73% okay. > >This is remarkably good. The vmsish.t failure is also present on Alpha and probably reflects a real bug in timezone conversions when doing stat(). The openpid.t failure is a mystery; can you run it in verbose mode: > >$ @[.vms]test .exe "" -"v" [.io]openpid.t > >In any case you have an excellent working Perl. How do VAX folks >f...

List::MoreUtils-0.25_1 pass on 5.10.1RC0, 5.10.0, 5.8.9, 5.8.8
Following up on my report that List::MoreUtils-0.24 failed its tests on the "maint-5.10 snapshot (aka 'RC0')" that came out on July, and Tassilo later confirming the nature of the problem ... List::MoreUtils-0.25_1 was just released on CPAN, and I have tested it manually from a download of the tarball from search.cpan.org, and the problem appears to be fixed. A clean unpack/Makefile/make/make-test passes all tests on 4 versions of Perl on my same PPCG4/MacOSX10.5.7 machine: - 5.10.1RC0 built by me with defaults, custom install loc - 5.10.0 built by m...

Smoke [5.8.9] maint-5.8-4-g7d6ecb1 FAIL(m) netbsd 5.0.2 (i386/1 cpu) #2
Automated smoke report for 5.8.9 patch 7d6ecb1f6c7eabec011b66526161fcf678919c99 maint-5.8-4-g7d6ecb1 qemu386netbsd5-0-2.bandsman.co.uk: AMD 686-class (i386/1 cpu) on netbsd - 5.0.2 using cc version 4.1.3 20080704 prerelease (NetBSD nb2 20081120) smoketime 1 minute 11 seconds (average 1 minute 11 seconds) Summary: FAIL(m) O = OK F = Failure(s), extended report at the bottom X = Failure(s) under TEST but not under harness ? = still running or test results not (yet) available Build failures during: - = unknown or N/A c = Configure, m = make, M = make (a...

Smoke [5.8.9] maint-5.8-5-g03fe696 FAIL(mc) linux 3.2.0-3-amd64 [debian] (x86_64/8 cpu)
Automated smoke report for 5.8.9 patch 03fe696d61d94bd59d878a9f81b0af85465d7e1e maint-5.8-5-g03fe696 nigelhorne.force9.co.uk: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (GenuineIntel 1600MHz) (x86_64/8 cpu) on linux - 3.2.0-3-amd64 [debian] using cc version 4.7.1 smoketime 6 minutes 1 seconds (average 20.056 seconds) Summary: FAIL(mc) O = OK F = Failure(s), extended report at the bottom X = Failure(s) under TEST but not under harness ? = still running or test results not (yet) available Build failures during: - = unknown or N/A c = Configure, m = make, ...

5.5.00 can't read 5.5.03 db ?
Is a database that was used/updated with a 5.5.03 engine not readable by a 5.5.00 engine? I have a 5.5.00 server database which I copied to my local computer which is using PB with 5.5.03 engine. I've modified/pipelined new data into it and have copied it back to the server. The server engine cannot read the database now. I get an error saying "fatal error cannot read database" (or something like that). I cannot do a validate database from SQL Central on the server either. On the local computer, everything is fine. I thought all 5.5.xx database file formats were interchang...

Smoke [5.8.9] maint-5.8-4-g7d6ecb1 FAIL(F) linux 2.6.32-5-686 [debian] (i686/2 cpu)
Automated smoke report for 5.8.9 patch 7d6ecb1f6c7eabec011b66526161fcf67891= 9c99 maint-5.8-4-g7d6ecb1 gateway.bandsman.co.uk: AMD Athlon(tm) Dual Core Processor 4850e (Authentic= AMD 2564MHz) (i686/2 cpu) on linux - 2.6.32-5-686 [debian] using cc version 4.4.5 20100816 (prerelease) smoketime 4 hours 52 minutes (average 16 minutes 15 seconds) Summary: FAIL(F) O =3D OK F =3D Failure(s), extended report at the bottom X =3D Failure(s) under TEST but not under harness ? =3D still running or test results not (yet) available Build failures during: - =3D u...

RE: possible VMS v5.5 fix (was RE: 5.8.0 release candidate status )
------_=_NextPart_001_01C2131A.2A74F2A0 Content-Type: text/plain; charset="iso-8859-1" >t/io/fs..............................FAILED at test 31 i recall making a trivial/small chg to [.t.op]fs.t to work-around this. but I don't have the original version at hand, would have go unpack the orig tarball to compare, and get a real gnu-diff back. but the chg was roughly like so, wrapped in a if-VMS ... # check if rename() works on directories if ($^O eq 'VMS') { # must have delete access to rename a directory `set file tmp.dir/protectio...

RE: possible VMS v5.5 fix (was RE: 5.8.0 release candidate status)
>From: MX%"craigberry@mac.com" "Craig A. Berry" 12-JUN-2002 14:32:30.91 >To: MX%"syshaf@tesla.njit.edu" >CC: MX%"vmsperl@perl.org" >Subj: possible VMS v5.5 fix (was RE: 5.8.0 release candidate status) > >Henry, > >I think (hope) this will take care of the compilation problems you are >having. For the GNU-impaired, I supply the patch as the result of a >DIFFERENCES/SLP command. To apply, set default to the [.vms] directory, >create the file vms_c_patch.upd from what I've included below, and execute &g...

5.8.2 is built as 5.8.1
I've moved my maint perl tree to 5.8.2: rsync -acvz --delete --force rsync://ftp.linux.activestate.com/perl-5.8.x ../perl-5.8.2 gives me patch level 21395 but when I build it it reports 5.8.1, is that on purpose? __________________________________________________________________ Stas Bekman JAm_pH ------> Just Another mod_perl Hacker http://stason.org/ mod_perl Guide ---> http://perl.apache.org mailto:stas@stason.org http://use.perl.org http://apacheweek.com http://modperlbook.org http://apache.org http://ticketmaster.com On Wed, Oct 15, 2003 at...

IDM 3.5.1 doesn't run with eDirectory 8.8.5 patch 4
I applied eDir 8.8.5 patch 4 (20504.13) and IDM (3.5.12) doesn't load. ndstrace -c modules shows that vrdim is not loaded. Attemps to load (ndstrace -c load vrdim) are unsuccessful. No errors in ndsd.log or errors when trying to load vrdim via ndstrace. -- chris_lange ------------------------------------------------------------------------ chris lange wrote: > I applied eDir 8.8.5 patch 4 (20504.13) and IDM (3.5.12) doesn't load. > ndstrace -c modules shows that vrdim is not loaded. Attemps to load > (ndstrace -c load vrdim) are unsuccessful. No err...

Web resources about - RE: [perl #31973] Re: "perl 5.8.2 (on Power PC) Can't locate lib .pm - ?" - who is responsible for Power PC perl 5.8.5 port ? - perl.perl5.porters

Responsible Parenthood and Reproductive Health Act of 2012 - Wikipedia, the free encyclopedia
The Responsible Parenthood and Reproductive Health Act of 2012 (Republic Act No. 10354), informally known as the Reproductive Health Law or RH ...

Facebook Is Not Responsible For Your Stupidity
Social media gets the blame for a lot of things — cyber-bullying , the rise of the selfie , hashtag -shaped potato snacks (really, Birds Eye? ...

Montana’s responsible budgeting has... - Governor Steve Bullock - Facebook
Montana’s responsible budgeting has produced a healthy budget surplus. It has us prepared for floods, fires, zombies and the current federal ...

Infographic: Facebook responsible for 58 percent of social logins in Q3
More and more people are logging into sites and apps with Facebook. The latest report from Gigya shows that worldwide, 58 percent of social logins ...

‘And Steve Said, “Fuck You Guys, Do Whatever You Want. You’re Responsible.” And He Stormed Out of the ...
Chris Fralic: 10 years ago today, Apple did something extraordinary, but it didn’t seem like it at the time. Like the story of a butterfly flapping ...

Internet Safety and Responsible Use Conference 2011 - an album on Flickr
Images draw of the main discussion points from the Learning and Teaching Scotland / Scottish Government Internet Safety and Responsible Use Conference ...

YouTube - Judith Light as Judge Liz Donnelly (responsible)
You are using an outdated browser, which YouTube no longer supports. Since some features on YouTube may not work, you are viewing a lightweight ...

72% Believe Small Business Owners Primarily Responsible for Their Own Success - Rasmussen Reports™
Rasmussen Reports - The best place to look for polls that are spot on

'We are all responsible, above all me' says Barca's Luis Enrique after loss - The National
'I don't like to evaluate individual performances when we lose a game' said Luis Enrique after Barcelona were beaten 3-2 by Paris Saint-Germain ...

Israel responsible for Gaza attacks: UN
A series of attacks on UN schools in Gaza that left at least 44 Palestinians dead has been blamed on the Israeli military.

Resources last updated: 12/28/2015 9:24:06 PM