Installed 11.1, got 11.2

This is more an annoyance and wanting to learn from my mistake that a
"production problem" per se. 2 or 3 weeks ago I downloaded and burned
the openSuSE 11.1 32 bit x86 iso. Last night I installed it; a fresh
install on a machine that had formerly been running openSuSE 9.x or
10.x. During installation I cherry picked what apps & services I
wanted... the machine is to be a firewall with minimal services running.
I was surprised when the installation completed to see it's running
11.2, Milestone 4. 

I'm not a guru, but I've installed openSuSE on a number of machines
since v8.x or so, as well as Red Hat/Fedora and Ubuntu. So far the
configuration is going well other than "ifconfig" wouldn't rename one of
3 network adapters so I had to use "ip address...". I would rather have
been on a stable release, but it's my home network's firewall so I may
live with 11.2 if it's reliable. 

Has anybody run into this or have an idea where I may have told the
installation to update to 11.2?


-- 
pdoubek
------------------------------------------------------------------------



0
pdoubek
9/4/2009 4:16:02 PM
opensuse.org.help.install 14389 articles. 0 followers. Follow

2 Replies
534 Views

Similar Articles

[PageSpeed] 6

I think you mistakenly downloaded the M4 ISO. That's the Milestone
edition that would have been out at that time.

That's the only way that could have happened without adding the 11.2
repos to Yast, which you surely would have remembered doing.

Stick the disk in the drive and open it with dolphin. You should see
what version it is.


-- 
P5N-E SLI, Core2Duo E6850 @ 3GHZ, 2 GB DDR2 800MHZ
EVGA 8800GTS 320MB, 2x320GB 
Arctic Cooling Freezer 7 Pro
OpenSuse 11.1, KDE 4.2
------------------------------------------------------------------------
markcynt's Profile: http://forums.opensuse.org/member.php?userid=14528
View this thread: http://forums.opensuse.org/showthread.php?t=421250

0
markcynt
9/4/2009 5:16:01 PM
Sorry I'm so late on the response, but thanks for your answer. I
redownloaded the ISO, burned a new DVD, and 11.1 installed just as I
originally expected. I don't know how I downloaded the wrong ISO but
apparently I did.


-- 
pdoubek
------------------------------------------------------------------------
pdoubek's Profile: http://forums.opensuse.org/member.php?userid=30615
View this thread: http://forums.opensuse.org/showthread.php?t=421250

0
pdoubek
9/18/2009 6:56:01 PM
Reply:

Similar Artilces:

Inspiron 1000 install problem (11.1, 11.2, net install, dvd install)
Ok, I have a plain jane Inspiron 1000, 2ghz celeron, 256m ram, 40gig hd, dvd. I burned 11.2 to dvd, 11.1 to dvd, tried installing both. Both get the dreaded "cannot create repository" (i'm paraphrasing). No problem, I download and burn 11.1, 11.2 net install's, checksums check out ok. I go through the first part where it downloads stuff from download.opensuse.com (or something similiar), then it fails again, not able to install. I get no message on the net installs. Just fails real quick with a red box. I tried a text install, fails. What gives? --...

11.2 install failure but 11.1 to 11.2 upgrade (partial) success
Machine is basically an ASUS mother board with an AMD64 Athlon x2 processor and Nvidia hardware RAID discs mirroring each other. It has been used as a server for about four years under various incantations of openSUSE. After a major software corruption a couple of days ago, I decided to install 11.2 from an iso image downloaded, MD5 check-summed OK. The DVD was burnt on an iMac at the lowest speed (x8) and verified correctly. Installation proceeded as expected from partitioning to the installation of the GRUB loader - which failed - but only with a warning. Of course any attempt...

Can not compile xmms-1.2.11. Please, help me. (configure: error: *** GLIB >= 1.2.2 not installed
OpenSuse11.3 download src xmms-1.2.11 ./configure .... checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for glib-config... no checking for GLIB - version >= 1.2.2... no *** The glib-config script installed by GLIB could not be found *** If GLIB was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GLIB_CONFIG environment variable to the *** full path to glib-config. configure: error: *** GLIB >= 1.2.2 not installed - please install first *** Please, help me Serg -- skoltogyan ------------------------------------------------------------------------ skoltogyan;2225491 Wrote: > OpenSuse11.3 > download src xmms-1.2.11 > ./configure > .... > checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports > shared libraries... yes > checking dynamic linker characteristics... cat: > /etc/ld.so.conf.d/*.conf: No such file or directory > GNU/Linux ld.so > checking how to hardcode library paths into programs... immediate > appending configuration tag "F77" to libtool ...

Install 11.1RC1 messed up 11.0 install -- help
I loaded opensuse 11.1 RC1 live CD last night to see how it worked. I got stuck configuring the network card. It seemed that the network switch was off and wouldn't turn on so that even though the firmware was installed I couldn't get past that issue. So I decided to go ahead and install a second copy of opensuse on the machine, so that I would be about to reconfigure and reboot. I have a copy of opensuse 11.0. I configured 2 new partitions 3.75GB for the root, 256MB for /var. I configured it to use the existing 1GB swap, the existing 1GB /temp, and the existing 1GB ...

Is 11.1 Installation Guide Identical For 11.2 ?
openSUSE Forums > New User How To/FAQ (read only) is a treasure of information and external references. It tells us how to get ready to install and how to install openSUSE-11.1 Thanks from all of us slow learners to oldcpu for a job well done. Are there any significant changes to this material which we'll need to know to prepare to install openSUSE-11.2 ? -- 3bitsShortOfaByte ------------------------------------------------------------------------ 3bitsShortOfaByte;2062213 Wrote: > openSUSE Forums > New User How To/FAQ (read only)is a treasure of > ...

can i move all device files from one 11.0.2 installation to another 11.0.2 installation with their server.cfg files ?
are there any problems n doing this ? ...

Error "Make sure that CD number 1 is in your drive." when installing Open SUSE 11.2, 11.3 and 11.4.
Hi sir, I had download the iso of Open SUSE 11.2, 11.3 and 11.4 and confirmed with the MD5 code. Then, I burned them using the lowest speed which the system supported. But the error message "Make sure that CD number 1 is in your drive." is always displayed while installing OS. How can I do? Environment: CPU i7-2710QE. PCH: B1 stepping. Platform: Huron River based. RAM: 2Gx1 unbuffered none ECC RAM. Target OS: Open SUSE 11.2, 11.3 and 11.4 for 32bit. Hdd: WD 160G SATA HDD using IDE mode by setting setup. DVD: Pioneer DVR-217BK. USB keyboard/mouse. Onboard VGA por...

Help with Grub booting 11.1 after installing 11.4
AMD 64bit OpenSuse 11.4 My installation on 11.4 went onto its own partition (s) - one for root fs and another for /home. I have encountered intermittent lockups of OpenSuse 11.4 and wish to use my old system as a backup until I can sort this out. Grub is only offering to boot the new system and Failsafe. My other installation does not appear in the menu. Any ideas on how to diagnose this ? I have several hard drives on the system with older versions of OpenSuse. The 11.1 release works ok and I would like to boot back into it. -- cabernet ----------------------------...

Installing fresh or upgrading Open Suse 11.1 to 11.2
Hello All, My question to the community is should I preform a fresh install of OpenSuSe 11.2 or upgrade my current version of OpenSuSe 11.1? As of current I just use my system to surf the web check, email and Basic Business needs. The specs of my Laptop are: OS INFORMATION OS: Linux 2.6.25.20-0.4-default i686 Current user: jraglin@Jada System: openSUSE 11.1 (i586) KDE: 3.5.9 "release 49.1" CPU INFORMATION Processor (CPU): AMD Turion(tm) 64 X2 Mobile Technology TL-60 Speed: 2,000.00 MHz Cores: 2 MEMORY INFORMATION Total memory (RAM): 2.8 GB Free ...

11.1 to 11.2
Hi, I am wondering if I should install a new openSuse 11.2 or if I should make an Update-Installation from DVD ('see openSUSE 11.2 Installation Quick Start' (http://tinyurl.com/y9qphnl) Installation Mode: Select Mode - New Installation / Update / [...]) or an Update Installation via Yast. Now I am using openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition). Contra new installation?: - I have an Laptop (Samsung x20) with integrated intel 91...

Help
I first tried this with the version 11.0 and then again with 11.1 with no difference. I boot from the liveCD, everything looks good and then the entire screen goes blank and stays blank. I suspect this happens when it attempts to switch to the graphical video mode. The quick hardware specs are: * New blank SATA HDD is installed. * I'm booting from the LiveCD * Dell Dimension 8400 with 4-Gigs RAM * Video card is a NVidia 9500GT with dual DVI outputs. This setup works perfect with WinXP-Pro and with Ubuntu 8.04. But with OpenSuse (and Fedora 10.0) it gets to a certain poin...

Seamonkey install 1.1.11 help
After installing 1.1.11 and going to the SeaMonkey homepage I get the following greeting. "Thanks for visiting this SeaMonkey start page, even though it appears to us that you are not using SeaMonkey yet." Any ideas on how to cure this little problem???? Thanks in advance for any ideas. taz043 wrote: > After installing 1.1.11 and going to the SeaMonkey homepage I get the > following greeting. > > "Thanks for visiting this SeaMonkey start page, even though it > appears to us that you are not using SeaMonkey yet." >...

Help Please, how do I reinstall gnome/ati drivers from install dvd on an installed 11.2 sys?
Deleted my ati drivers accidently during a botched upgrade. Have been trying to fix the problem from things I read on here, made a thread but can't get online to execute it.Found my install dvd tried running repair and in the process deleted my windows partition(anyway to get that back?) and still no previous ati drivers or gnome installed. So my question is how do I install ati drivers from the dvd and how do I install gnome or kde from install dvd? -- Marslightyear ------------------------------------------------------------------------ Marslightyear;2166924 Wro...

Upgrade Install From 11 to 11.1
It hasn't been long since I'm on version 11 (because it took long to fix some major issues I had with) and now that version 11.1 is out, I really don't want to do a full install. Good thing I noticed there is an 'upgrade' option on the install DVD. I'm not sure what will happen though, so I had a few questions. If you know the answer to any number of these, please reply: 1 - What's being upgraded? 2 - Will all the packages I have installed be upgraded? 3 - Is it a side-by-side install, keep the old and get the new? 4 - What about the ones I did NOT in...

Install EA4.2.2 on HP-UX 11.11 fails
I am trying to install EAServer r 4.2.2 on HP-UX 11.11. Installation fails: after all choices are made in the GUI, the installer fails after just 1% with the much-saying error : null. > I am trying to install EAServer r 4.2.2 on HP-UX 11.11. > Installation fails: after all choices are made in the GUI, > the installer fails after just 1% with the much-saying > error : null. Additional info : I was able to perform a complete "Client Install" which also dies, but then after copying 100% of the software. This is a multi-part message in MIME format. ---=_fo...

No Mouse installing 11.1 in Full Virt 11.1 VM
I have no mouse function during install of openSUSE 11.1 in a fully virtualized openSUSE 11.1 VM. Mouse works on the 11.1 host, on both Win2k3 DC's in there respective full virt vm's, and in Win2kPro in it's Full Virt VM. Can't use ParaVirt as it hate's the local CD DVD drive. Thanks -- unyalli ------------------------------------------------------------------------ 19 views no replies interesting.... -- unyalli ------------------------------------------------------------------------ unyalli's Profile: http://forums.opensuse.org/...

Help: ASE 11.5 Install, srvbuildres and Solaris 2.5.1
I'm trying to install ASE 11.5 on a Solaris 2.5.1 box via telnet. Can't run sybsetup or srvbuild because I don't have X available. I have modified the sample resource files and when I try to run srvbuildres -r srvbuild.adaptive_server.rs I get a Segmentation fault (core dumped). Here is the resource file that I'm using: sybinit.release_directory: USE_DEFAULT sybinit.product: sqlsrv sqlsrv.server_name: SYBASE sqlsrv.new_config: yes sqlsrv.do_add_server: yes sqlsrv.network_protocol_list: tcp sqlsrv.network_hostname_list: sybase.domain.com sqlsrv.network_port_lis...

Help Install sybase-common-11.9.2-1.i386.rpm
when I use "rpm -hiv sybase-common-11.9.2-1.i386.rpm" to install sybase-11.9.2-1. I get the error: failed dependencies: ldconfig >= 1.9.5-8 is needed by sybase-common-11.9.2-1 what can I do ? >when I use "rpm -hiv sybase-common-11.9.2-1.i386.rpm" to install sybase-11.9.2-1. > I get the error: > >failed dependencies: > ldconfig >= 1.9.5-8 is needed by sybase-common-11.9.2-1 > >what can I do ? check the version of your ldconfig with ldconfig -v, the output may be long and the version is on top. if your version is h...

Problems Installing ASE 11.5.1 in SCO UNIXWARE 2.1.1
Hello, During the installation of Sybase Adaptive Server Enterprise 11.5.1, under SCO UNIXWARE 2.1.1, the program reports an error in the section where the systemprocs and master device are created, when the raw device is assigned in /dev/rdsk/c0b0t0s3 and /rdsk/c0b0t0s5, the following message is displayed: Unable to access /dev/rdsk/c0b0t0s7 and /dev/rdsk/c0b0t0s7. The same error occur when trying to assign links files to the two raw devices as follow: /dev/rdsk/c0b0t0s3 -> /dev/rdsk/master.dat /dev/rdsk/c0b0t0s5 -> /dev/rdsk/systemprocs.dat Then the message displayed is: ...

Problem in Installating Monitor Server 11.9.2 on ASE 11.9.2.
Hi, I was tryint to install SQL monitor server 11.9.2 on ASE 11.9.2 on HP-UX 11.0 9000/800. It gives the following error """""""""""""""""""""""" Nov 14 12:28:18 2000: DB-Library Version: Nov 14 12:28:18 2000: Sybase DB-Library/11.1.1/P-EBF8022/hp800/HP-UX 10.01/1/OPT/Fri Jun 26 15:04:39 1998 Nov 14 12:28:18 2000: Open Server Version: Nov 14 12:28:18 2000: Sybase Server-Library/11.1.1/P-EBF8022/hp800/HP-UX 10.01/1/OPT/Fri Jun 26 13:53:53 1998 Nov 14 12:2...

11.4 M6 Install-11.4 RC1 Install
I'm currently running 11.4 M6 on my Netbook and was wondering if I download the Release Candidate 1 DVD image and burn it to DVD will I need to do a clean Install of Release Candidate 1 or will I be able to upgrade M6 to RC1. This is the first time that I've used a pre-release version of OpenSuse? Roland -- Rolandh31 ------------------------------------------------------------------------ Rolandh31;2287497 Wrote: > I'm currently running 11.4 M6 on my Netbook and was wondering if I > download the Release Candidate 1 DVD image and burn it to DVD wil...

11.4 installed hal, though it was not installed on 11.3
I had removed hal on 11.3 but the upgrade reinstalled it, my understanding was it was replaced by udev. Was there a reason it was re-installed? Is there a reason to keep it? To not keep it? thanks, -- openSuse 11.4 x64, kde4.6, Opera 10.x developer build ------------------------------------------------------------------------ Strange I have just checked - on a clean install of 11.4 - and hal has been installed too. Suppose the easiest thing to do is un-install hal and see if you have any problems. -- dth2 ------------------------------------------------...

Difference between IQ 11.0,11.1,11.2 and 11.5
PowerDesignor WarehouseArchitect 6.0 does not support IQ 11.2 and 11.5. Can the .def file for 11.1 can be used as is with 11.2 and 11.5 ? Any modifications need to be made to the .def file?Is there any patch available for this? Thanks Shashi Kanth shashi@systemlogic.com ...

Difference between IQ 11.0,11.1,11.2 and 11.5
PowerDesignor WarehouseArchitect 6.0 does not support IQ 11.2 and 11.5. Can the .def file for 11.1 can be used as is with 11.2 and 11.5 ? Any modifications need to be made to the .def file?Is there any patch available for this? Thanks Shashi Kanth shashi@systemlogic.com I have never used PowerDesignor WA 6.0 so I'm not sure what a .def file is, but I hope the following answers your questions. The are a lot of differences between the various versions of IQ, but each new version of IQ supports a superset of the previous version's syntax. So all iq commands found in 11....

Web resources about - Installed 11.1, got 11.2 - opensuse.org.help.install

States of India by installed power capacity - Wikipedia, the free encyclopedia
^ "ALL INDIA REGIONWISE GENERATING INSTALLED CAPACITY OF POWER" (PDF) . Central Electricity Authority, Ministry of Power, Government of India. ...

Facebook, Messenger Pre-Installed on New Nokia 215, Nokia 215 Dual SIM Low-Cost Handsets
Facebook and Facebook Messenger are among the preinstalled applications on the new Nokia 215 and Nokia 215 Dual SIM entry-level phones from Microsoft ...

HTC reveals HTC First, an Android smartphone pre-installed with Facebook Home
HTC today revealed the HTC First, the first Android smartphone that comes with Facebook Home pre-installed on the device. With Facebook Home ...

Introducing installed app category targeting: a new way to target users and gain insights into mobile ...
We’re excited to introduce installed app category targeting: a new tool that enables app advertisers to reach users based on the categories of ...

Installed a new HDD - Flickr - Photo Sharing!
Seagate 100GB, 7200RPM in the 3 year old PowerBook.

FIRST EVER IPAD MINI INSTALLED INTO DASH OF A CAR - YouTube
Soundwaves of Tampa is the first to install a iPad Mini into a dash of a car. Please check us out and build pics at http://Facebook.com/soundwavesoftampa ...

Queensland's first Bitcoin ATM installed in South Brisbane
What is believed to be Queensland’s first Bitcoin ATM is up and running at a South Brisbane cafe, allowing customers to withdraw and sell ...

Cameras installed on hull of ISS (00:59)
RAW VIDEO: Russian cosmonauts perform a spacewalk to install photographic and scientific equipment on the hull of the International Space Station. ...

Where in the US is solar installed?
New data shows that Californians' penchant for photovoltaics has them leading in pipeline capacity by a factor of five, while Nevada's love of ...

New cycling separations to be installed on ACT roads
New separation measures will be installed and trialled on ACT roads in the next 12 months, as the government attempts to make cycling safer by ...

Resources last updated: 3/23/2016 3:58:53 PM