upgrading from 10.1 to 10.1.1 does not finish

upgrading out ZCM server from 10.1 to 10.1.1 via ZCM - Configuration -
System Updates dies not finish; Status shows >In Process< Pending >0<,
Successful >17<, Failed >0<, so Update should change to Baselined and Agent
Packages should be new generated on 10.1.1 level, but nothing in this way
happens.
What can I do to finish the upgrade? As long as such problems occurs I
cannot deploy ZCM on our campus and have to stay on Zen 7 level; Some people
at our university in the meantime prefer to cancel ZCM and switch to other
managing solutions. 

There are some other issues with ZCM I have posted in the corresponding
newsgroups, for example a issue with remote control posted on October 13 and
one posted on August 26, for the October 13 post only automatic reply is
given, for the August posting I cannot see a reason why certificates are not
generated for the remote operator if I use external CAs).



-- 

Werner Seifert
 
Informations Management  der
Johannes Kepler Universität Linz /
Information Management of the Johannes Kepler University Linz
 
Altenberger Straße 69
A-4040 Linz / Austria
Tel. +43 (0)732 2468 1591
 

0
Werner
10/20/2008 5:43:36 AM
novell.zenworks.10.install 2954 articles. 0 followers. Follow

1 Replies
643 Views

Similar Articles

[PageSpeed] 7

Werner,

It appears that in the past few days you have not received a response to your 
posting.  That concerns us, and has triggered this automated reply.

Has your problem been resolved? If not, you might try one of the following options:
 
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the 
correct newsgroup. (http://forums.novell.com)

Be sure to read the forum FAQ about what to expect in the way of responses:  
http://support.novell.com/forums/faq_general.html

If this is a reply to a duplicate posting, please ignore and accept our apologies 
and rest assured we will issue a stern reprimand to our posting bot.

Good luck!

Your Novell Product Support Forums Team
http://support.novell.com/forums/

0
Automatic
10/24/2008 8:33:40 PM
Reply:

Similar Artilces:

10.1.1 update before 10.1 is finished
Can I deploy the 10.1.1 update while I still have devices pending for 10.1? The 10.1 deployement went about as smooth as 20 grit, so I still have a lot of devices that won't update themselves to 10.1 (or aren't registering the update correctly). What kind of complications could I see by telling 10.1.1 to deploy before 10.1 is baselined? -- Someone reported to me that the 10.1.1.0 upgrade would not run until he baselined 10.1.0 -- Craig Wilson - MCNE, MCSE, CCNA Novell Support Forums Volunteer Sysop Novell does not officially monitor these forums. Suggesti...

Problem upgrading from 10.1 to 10.1.1
Hi, I've got a little situation with a ZCM 10.1 installation (installed from CD, not upgraded) - I seem to have gotten the 10.1.1 upgrade to baselined without it actually having applied to the sole Primary server. I don't have the logs handy to show the errors, but I'm basically looking for a way to un-set that server as being successful so that I can re-run the upgrade on it. This probably includes un-setting 10.1.1 from being baselined. Thanks for any help, Andy Deckowitz -- AndyDeck ------------------------------------------------------------------------ ...

10.1.1 to 10.1.2
I have a ZCM server that is at 10.1 version. I didn't already installed 10.1.1 update. When 10.1.2 will be released, will it be possible to update from 10.1 to 10.1.2 or should I do 10.1.1 to update to 10.1.2 ? Thanks. My guess is that 10.1.1 will need to be deployed to workstations prior to 10.1.2 -- Craig Wilson - MCNE, MCSE, CCNA Novell Support Forums Volunteer Sysop Novell does not officially monitor these forums. Suggestions/Opinions/Statements made by me are solely my own. These thoughts may not be shared by either Novell or any rational human. "Nor...

Smoke [5.10.1] perl-5.10.1-1-gca8de22 FAIL(M) Solaris 2.10 (i386/1 cpu)
Automated smoke report for 5.10.1 patch ca8de220718ba91d5a5fdd9779497cd5b0250258 perl-5.10.1-1-gca8de22 unknown: i86pc (2300MHz) (i386/1 cpu) on Solaris - 2.10 using /opt/SUNWspro/bin/cc version Sun C 5.9 SunOS_i386 2007/05/03 smoketime 9 minutes 24 seconds (average 9 minutes 24 seconds) Summary: FAIL(M) O = OK F = Failure(s), extended report at the bottom X = Failure(s) under TEST but not under harness ? = still running or test results not (yet) available Build failures during: - = unknown or N/A c = Configure, m = make, M = make (after miniperl), t...

ZCM 10.1.0 to 10.1.1 Fails
I have given up using other people's threads and have started my own. I am trying to update from 10.1.0 to 10.1.1 on a win2003sp2R2 server. This server started out as 10.0. I have only ever used system update over the years to bring it all the way up to 10.1.0. Yes, the schema update has been applied. System update downloads the 10.1.0 update just fine and allows me to deploy it. I deploy it only to my primary server, I refresh the server and the update goes from pending to failed. The failure is immediate (within about 30 seconds). It is almost like it is not even tryin...

Server will not update 10.1 to 10.1.1
Trying to update the ZCM from 10.0 to 10.1.1. I do not understand why this product is so painful every step of the way. Trying to update from 10.0.3 to 10.1 was the same kind of hassle. The 10.0.3 problem is documented in these forums but I have seen nothing that is helping me get this upgrade to function. The system update just does not work, I try to download the updates and it shows downloading for a minuet then just goes back to available, no error on the screen and I can not find anything in a log file. So I try to go the manual route, I run the ZCM -sui and it returns &qu...

10.1.1 won't baseline so I can't upgrade to 10.1.2
I have assigned 10.1.1 to all of the devices in the zone and ignored the remaining devices in the pending column, but 10.1.1 says "In Process" and will not Baseline. Can anyone help or has anyone experienced this? I can't upgrade to 10.1.2 until this happens. Thanks, Adam -- avedra ------------------------------------------------------------------------ avedra;1704604 Wrote: > I have assigned 10.1.1 to all of the devices in the zone and ignored the > remaining devices in the pending column, but 10.1.1 says "In Process" > and will ...

Update to 10.1.1
Hi all, I have recently updated to 10.1.1 and the system has been baselined - however I think something went wrong along the way: all my windows desktops were reporting "error" (that's all...nothing more interesting in the ZCC) and to look on the devices system-update.log file - which didn't exist. However in C:\Program Files\Novell\Zenworks\logs\system-update there was an empty folder (long name with letters and numbers) - if I deleted that folder and reset the status to redeploy the update suddenly the update became successful for that machine - but the ...

ZCm 10.1.3 update, when client only has 10.1.1
hi... we have 10 or 20 clients, which doesn't get the 10.1.2 update ( were managed by another zcm zone) and now i want to update to 10.1.3... -- zcm10 ------------------------------------------------------------------------ Zcm10, so are you asking if you can do this? Take a look at the TID for 10.1.3 - http://www.novell.com/support/search.do?cmd=displayKC&docType=kc&externalId=7002526&sliceId=1&docTypeID=DT_TID_1_1&dialogID=34945057&stateId=0%200%2034943059 it says "In order to upgrade the agent on your workstations, they must be run...

Smoke [5.10.1] perl-5.10.1-1-gca8de22 FAIL(c) freebsd 8.1-RELEASE (i386/1 cpu)
Automated smoke report for 5.10.1 patch ca8de220718ba91d5a5fdd9779497cd5b0250258 perl-5.10.1-1-gca8de22 qemu386freebsd8-1.bandsman.co.uk: QEMU Virtual CPU version 0.13.50 (i386/1 cpu) on freebsd - 8.1-RELEASE using ? unknown cc version smoketime 2 hours 33 minutes (average 1 hour 16 minutes) Summary: FAIL(c) O = OK F = Failure(s), extended report at the bottom X = Failure(s) under TEST but not under harness ? = still running or test results not (yet) available Build failures during: - = unknown or N/A c = Configure, m = make, M = make (after miniper...

ZCM 10.1.0 to 10.1.1 not working on primary server
Hi, Our primary server is not udating correctly from ZCM 10.1.0 to 10.1.1. OS is SLES 10 SP1. It sits there at status "Pending" and says it will install when the server is refreshed. When the server is refreshed it immediately changes to "Failed" due to error. Clicking on "Error" says to look at the system-update.log. I looked in /var/opt/novell/log/zenworks/system-update and there is a directory for that patch guid but it is empty. Any ideas? same here on win2k3 sp2. fails due to unknown error and system-update logs do not exist. -- :co...

User associations break after update from 10.1.1 to 10.1.2
We have begun rolling out the 10.1.2a update. Everything applied to the server correctly. We have deployed the update to several workstations that had the 10.1.1 agent and a workstation that had the Zen 7 agent. All of the workstations now will not show any user associated bundles. Properties on the Zen icon in the taskbar show the bundles as being associated and effective but they do not show up in the NAL window. Workstations that still have the 10.1.1 agent are showing all of their user associated icons. Any ideas? Thanks, Jay -- jwilkins -------------------------...

Smoke [5.10.1] perl-5.10.1-RC1-1-gbadf489 FAIL(F) netbsd 5.0.1 (i386/1 cpu)
Automated smoke report for 5.10.1 patch badf48949ef0f6be41c06a682330f4aa37c4f4ff perl-5.10.1-RC1-1-gbadf489 p5netbsd: Intel 686-class (i386/1 cpu) on netbsd - 5.0.1 using cc version 4.1.3 20080704 prerelease (NetBSD nb2 20081120) smoketime 9 hours 14 minutes (average 1 hour 9 minutes) Summary: FAIL(F) O = OK F = Failure(s), extended report at the bottom X = Failure(s) under TEST but not under harness ? = still running or test results not (yet) available Build failures during: - = unknown or N/A c = Configure, m = make, M = make (after miniperl), t = ...

Possibillity to upgrade 10.1 beta to 10.1 released version
Anybody tried to update v10.1Beta to the released version ? I have done lot of testing which is stored in a (fresh created) MSSQL database with version 10.1Beta. Is it possible to do a fresh 10.1 server install keeping(/updating?) the 10.1Beta database without errors ? Any experiences are welcome. This is not supported and the installer checks the current version and aborts if its is not a supported version. I don't know if it is keying off the version registry entry or what. You could try fooling it by tweaking something like that. However, this is definitely not sup...

Web resources about - upgrading from 10.1 to 10.1.1 does not finish - novell.zenworks.10.install

Facebook Starts Upgrading Profiles To Timeline
A couple of readers told us that timeline previews have kicked in on their profiles without their having initiated the change themselves. A welcome ...

Facebook Upgrading “Insights” Metrics Dashboard for Page Managers Tonight
Facebook has just begun pushing an upgrade to its “Insights” metrics dashboard for Facebook Pages that gives administrators more visibility into ...

Flickr: Help: Free Accounts, Upgrading and Gifts
Flickr is almost certainly the best online photo management and sharing application in the world. Show off your favorite photos and videos to ...

Mac Spoofed: Upgrading [Low Quality]
PC teaches Mac about the benefits of upgradability.

Coalition's NBN will need ongoing, costly upgrading, experts warn
The Coalition's planned broadband infrastructure will "freeze" broadband speeds, and need ongoing and expensive upgrading to resemble the system ...

Beware of unintended and costly consequences when upgrading houses
Meeting the Building Code measures on energy efficiency is a potentially tricky business, even if you are upgrading or extending only one part ...

Nuclear states still upgrading stocks
Nuclear armed states continue to upgrade their stockpiles despite s trend towards global disarmament.

Looks like Labor's upgrading from Tarago to minibus
The people of Stafford have done the rest of Queensland a favour by electing Dr Anthony Lynham.

Promise check: $16m towards upgrading Hobart's Cadbury factory
Keep track of the Coalition's promise to spend $16 million on upgrading Hobart's Cadbury chocolate factory.

Upgrading IOIO to Bluetooth - YouTube
An instructional video showing how to upgrade IOIO's firmware in order to make it Bluetooth capable. Downloads are at: https://github.com/yt ...

Resources last updated: 12/26/2015 2:16:15 AM