10.0.3 agent updating to 10.0.1 instead of 10.0.3.2
MY ZCM10 server is windows 2003 SP2 R2 updated to zcm 10.0.3.2
When I deploy the ZCM agent to a workstation the workstation installs
the 10.0.3 agent. After the reboot, the workstation then downloads and
installs the 10.0.1 msi files. The ZAA still lists the agent as
Any idea why the 10.0.1 files are being downloaded to the workstation
after 10.0.3 is installed on the workstation?
Any idea how I can get 10.0.3.2 to install on the workstation?
moffatt said on 7/23/2008,
...10.0.3 agent update to 10.0.3.2
On some devices, when the update try to install, they are going in Error
state and the error message is:
"One or more pre-requisite updates failed to install to this device. Ensure
all pre-requisite updates have been applied successfully and try again."
What is that/those pre-requisite ?
I don't know if all I did help to resolve my problem but I:
- reboot my ZCM server
- unregister devices
- re-register devices
- refresh devices
Now, update is applied.
Refered to TID 7000785
"Normand" <email@example.com> a �crit dans le message...Issues updating to 10.0.3.2 from 10.0.3.0
Can anyone confirm that they have update to 10.0.3.2 and whether or not
there were any issues or if the clients noticed anything?
ZCM 10.1.0 is now available.
It is recommended to update to this and not 10.0.3.2
ZCM 10.1.0 is only available via download.novell.com
Please be sure to backup your DB prior to the upgrade.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational hum...10.0.3 to 10.0.3.2 Agent
This may have been briefly discussed but I figured that I'd throw my 2
cents worth in.
Okay, I've had a number of my machines get the update to 10.0.3.2 and
it's been running much better for me except for a couple of minor
issues. One thing that I noticed though that the most recent of my
installs weren't getting the patch. These are the machines that were
originally installed with 10.0.3. I started looking into the problem
and did a clean 10.0.3 install on a VM. To my dismay, the ZENupdater
module was completely missing. No .dll, no .exe, nothing. So, I ...Update 10.0.3 to 10.0.3.2
After a few attempts we got our Server to Version 10.0.3.2
Our clients won't Update to 10.0.3.2 also new Agent installations will
only starts with Agent Version 10.0.3.
Any solutions ??
Thx so far
in the past, did you ever follow the process to manually update your
agents on the server?
yes we did it at the Update from 10.0.1 to 10.0.2.
--------------------------------------------------...10.0.3 agent imaged with 10.0.3.2
I have many devices with 10.0.3 agent on which I need to push a new image.
Those devices are pending to receive the new 10.0.3.2 agent version.
The new image contains the 10.0.3.2 agent.
Is this image process could cause any damage ?
Normand said on 7/22/2008,
>I have many devices with 10.0.3 agent on which I need to push a new image.
>Those devices are pending to receive the new 10.0.3.2 agent version.
>The new image contains the 10.0.3.2 agent.
>Is this image process could cause any damage ?
I don't think so, other than the nor...Updating Agent from 10.0.1 to 10.0.3.2 no shortcuts
yup, the angry kid again.
so after following TIDS 701131 & 7001305
We have managed to get some Zenagents updating to 10.0.3.2
now we have a few that after the upgrade, no longer publish shortcuts
on the start menu or the desktop.
We are receiving messagers in the device summary:
The handler EnvironmentValueHandler threw an exception.
System.TypeLoadException: Could not load type
'Novell.Zenworks.Zmd.Common.EnvironmentUtil' from assembly 'zmd,
Version=10.0.3.0, Culture=neutral, PublicKeyToken=null'. at
Novell.Z...A Mess, 10.0.3 to 10.0.3.2
I did the update over the weekend and we are in a slight mess.
what has happened.
previously we did the 10.0.3 update but didn't deploy the updated agent
to machines due to the win32 collector issue (it only went to some
workstations in a staging group).
over the weekend, we updated our 2 zcm servers to 10.0.3, deployed the
agents to 2 staging groups, one of which was all 10.0.3 agents, the
other a mixed bag of 10.0.3 and 10.0.1.
the 10.0.3 agents all updated and rebooted. the 10.0.1 is reporting
that the update is assigned but the agents are not updating, they a...Update to 10.0.3 from 10.0.2
I am trying to update from 10.0.2 to 10.0.3 using the system updates.
The problem I have is that I cannot approve the 10.0.3 update because
it get's stuck at : Update for ZCM (10.0.3) May 15, 2008 Syncing (99%).
I tried manually, as describe in novell tid (I forgot the number), but
no success. I tried manually as I know how to do it (copy the rpm files
then rpm -Uhvf *.rpm) and it updated the files on the primary server.
But now everytime I go to system updates, I get a pop-up saying that the
10.0.3 is not successfully applied, and I have to use the older system
update pag...ZCM 10.2.2 upgrade to ZCM 10.3.0/10.3.1
Hi All, I want to check if want to upgrade from ZCM 10.2.2 to ZCM
What kind of things I need to prepare?
My server is under SLES 10 SP3
Hope you can provide me the solution and answer on that.
Click the following link for the 10.3.1 update readme:
'Update for ZENworks 10 Configuration Management SP3 (10.3.1)'
See the support matrix table for the different supported versions.
*DEV*...10.2.0 to 10.3.3
When deploying an update to the ZCM Agent on various workstations from
10.2 (exact sub-version unknown, I can get it if necessary) to 10.3.3
with the requisite stopover at 10.3.0a, in many though not all cases the
update "hangs" waiting for CASA.MSI to be processed.
During the processing of CASA.MSI, it launches a sub-process of
'micasad.exe /install'. (In some cases it does this twice, the second
time with additional arguments for a REINSTALL scenario.)
micasad.exe itself then launches a sub-process of 'regsvr32 /s /n /i
lcredmgr.dll' (with full paths, ...Stuck manual update from 10.0.2 to 10.0.3
As many others i�m having trouble updating from 10.0.2 to 10.0.3 on my
First I tried to do the systems update like it supposed to work, thru
But after getting suck at 47% syncing 3 times (left the server for more
than 24h two of the times) I downloaded the manual update files.
Before applying the manual update i cleared the previous update
Changed the hoste file, copied the files and rebooted the server.
Fired up the ZCC. �But no update to download?..
If i choose Action -> Download Update I get "The current update has
begun downloading", ...10.0.2 installed, still asks to install 10.0.2 update
I installed the 10.0.2 update about ten days ago and it is verified on
the About page.
However, I get numerous daily reminders to install the 10.0.2 update.
So I checked "never check for updates" but that apparently isn't working
either because I'm getting all of the reminders.
So what's my only option: uninstall and then reinstall?
I'm a bit leery of doing that: everything else seems to be functioning
properly. However, when I previously installed the 10.0.1 update,
numerous things were broken on my Win7 system and I had to revert to a
restore poi...Agent Update 10.0.3 to 10.2.1
I'll be shortly performing the upgrade from 10.0.3 to 10.2. But as
10.2.1 is released we may jump to the lastest version. We've tried the
upgrade several times for updating the server and clients to 10.2 and
it's worked 100% but i have a question relating to the agent and 10.2.1.
If i'm reading the agent updates notes correctly.
Firstly the server will be going through the following steps
10.0.3 - 10.1 (Via Disk)
10.1 - 10.2 (Manual Import File)
10.2 - 10.2.1 (Manual Import File)
The readme file from 10.2.1 seems to imply that the clients need agent