Windows XP & Netware 4.2 Network Printer Captures

Printer capture settings drop off (disappear as though an End Cap was 
issued) after the first print job on our Windows XP computers.  Is this 
a Windows XP or Client 32 problem?  Is there a workaround or fix?  This 
didn't happen on Windows 98se.

Server: Netware 4.2 SFT3
Workstation: Windows XP Professional sp 1
Client32: 4.83sp3

Thanks,
Larry

0
Larry
2/27/2004 6:15:38 PM
novell.netware.winnt-2x-xp 10573 articles. 1 followers. Follow

4 Replies
754 Views

Similar Articles

[PageSpeed] 12

These DOS print jobs?
-- 
Dave Lunn
NSC SysOp
http://support-forums.novell.com


0
Dave
2/27/2004 7:36:06 PM
Yes, they are DOS print jobs.
S/
Larry



Dave Lunn wrote:
> These DOS print jobs?

0
Larry
2/27/2004 8:14:53 PM
Geeze this is getting old.

XP really doesn't do DOS well.  You might try pairing a capture and end cap
from a DOS startup.  XP and DOS windows just don't seem to work predictably.
-- 
Dave Lunn
NSC SysOp
http://support-forums.novell.com


0
Dave
2/27/2004 10:03:16 PM
Thanks.  Hopefully our DOS won't be around much longer.

Sincerely,
Larry


Dave Lunn wrote:

> Geeze this is getting old.
> 
> XP really doesn't do DOS well.  You might try pairing a capture and end cap
> from a DOS startup.  XP and DOS windows just don't seem to work predictably.

0
Larry
2/28/2004 10:10:46 PM
Reply:

Similar Artilces:

NetWare 4.2 to Windows XP
I have a NetWare 4.2 server and a Widows XP Professional Service Pack 2 server and I am trying to figure out a way to get these two servers to communicate with eachother without installing NetWare on the Windows XP server. I found the NetWare 4.2 manual in the documentation archive on Novell's website and I've looked through it a bit and haven't found anything. I searched other postings on this group and one other and didn't have much luck there either. I'm trying to do this because I want to move files from the NetWare machine to the Windows XP machine. If anyon...

Windows XP Netware Client and Netware 4.11 server
I am having some odd problems with this combination. Most of our client machines are W98 and the login script seems to work just fine. The new Windows XP Pro computer I am trying to add to the network doesn't seem to behave the same as my W2K Pro computers using the same Novell Client. Login times and NetWare rescource access times were very long so I removed the IP support from the Novell Client, specified the 802.3 frame used by the 4.11 server and specified its actual network number in the NWLink protocol settings. That helped one login user: everything worked nicely, l...

Netware 4.1 windows xp or xp professional and which client
I have Netware 4.1 running on dos with dataflex and windows 98 machines. I am getting a Windows xp or xp professional machine. Any one know which one would work best for a dos based database system and would work with novell 4.1 and which client to use. We also have word and excel documents on the fileserver that are shared by the windows 98 workstations. We would like the xp or professional to run the dos stuff and also share the word and excel files. Thank You, Seth XP Professional is the one designed for networking environment. Although, I've seen reports that XP Home wor...

Netware Client 4.83SP1 & 4.90SP1 Causes Blue Screens In Windows XP
We have a number of HP Compaq d530 desktop systems running Windows XP SP1 Professional. With virtually any image I can find or make for these models, I get a blue screen of death after installing the Netware client (both 4.83SP1 & 4.90SP1). In either case, the client is installed (including the remote control utility for Zenworks) and the machine reboots after the installation has completed. When the machine comes back up everything seems fine...until you log in. At that point, the machine will give a blue screen of death. All of these systems have Intel Extreme grap...

49sp1, NetWare 4.2 and Windows Xp Pro
Hi, I installed 49sp1 client on Windows Xp Pro laptop my netware version is 4.2. Not able to log in, "tree and server not found". If I install de MS Cliente for netware, I am able to explore the server. I wonder if I am missing somethig. Need help, Thanks Luis, Make sure when you install the client you do it as a custom install, IPX only. If you're still having connection problems, make sure the laptop IPX frame type is set to match that of the server. -- Hamish Speirs Novell Support Forums Volunteer Sysop. http://haitch.net (Pleas...

Configuring an Windows XP client with a Netware 4.2 server
I am somewhat new to Novell. I have to set up an employee's new computer and configure it to have access to our Novell server. The new computer is running Win XP Pro. The only client version we have is for win 95/98. I need to know how to set everything up. Any help would be greatly appreciated. Thank you. Download the Novell Client for XP from http://download.novell.com -- Edison Ortiz Novell Product Support Forum SysOp (No Email Support, Thanks !) Since you are working with a 4.x server -- I'd go with the 4.83 client: > Where can I download full 4.83SP...

Zen 4 & windows xp using netware 5.1
is restricting users desktops and settings work well with windows xp pc's and Zen. (similiar to windows group policies) have just bought in 100 xp pc's and want the workstations rectricted centrally. thankyou PM > windows group policies Group Policies are what ZfD4 uses to restrict a Win2k and XP PC. -- Timothy Leerhoff Principal Consultant Independant Experts Novell Support Forums Sysop paul.matchett@hotmail.com, > is restricting users desktops and settings work well with windows xp pc's > and Zen. (similiar to windows group policies) Just a...

Netware 4.10 & Win XP Sp2
Hi folks Configuration: Novell 4.10 server (fully patched), WinXP Prof SP2 workstation using Novell Client 4.83 SP3. When we go to "My Network Places" and try & navigate, Novell Connections, then double click on the server icon, we get "main" & "sys" shown, if we then try & click on either of these icons we get a warning message as below: " \\server\MAIN is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions." Followe...

netware 4.11 - windows XP
We have been running 4.11 with various workstations.(dos, windows of many flavors up to and including XP Homeand XP Professsional) Most workstations use client 4.83 with no problem. Our primary use is a dos based program using a btrieve engine. Every machine is fundamentally working fine. I just bought a brand new workstation and downloaded client 4.9. I coudn't connect to the server. I ugraded to XP Pro and after much effort, I connected to the server. The problem is when I run the program with the btreive engine, it always freezes up after a few minutes. Any advise? Help ...

Netware & Windows XP...
Windows XP Pro SP 2 Novell Client 4.90 SP2 Is there a way I can ENABLE my Windows XP firewall and still be able to connect to my Netware tree? Whenever I enable my firewall...even with exceptions...all my Netware traffic comes to a screaching halt. Thanx. You may want to give this a go: http://support.novell.com/cgi-bin/search/searchtid.cgi?10095407.htm Otherwise, I'd suggest getting a real firewall instead of the MS toy. stmasi@hotmail.com wrote: > Windows XP Pro SP 2 > Novell Client 4.90 SP2 > > Is there a way I can ENABLE my Windows XP firewall ...

Capturing Netware Printers under XP
Is it possible to capture a Netware SB4.2 printer as a DOS printer with Windows XP Pro? I can add a Netware printer OK in XP, but I don't see where it lets you assign an LPT port to it. I need to still print from a DOS legacy application, and the only thing that it understands is LTP1-3, not a UNC naming convention. >Try the following command: net use lpt1 \\servername\printqueue Is it possible to capture a Netware SB4.2 printer as a DOS printer with > Windows XP Pro? I can add a Netware printer OK in XP, but I don't see > where it lets you assign an LPT p...

Re: Netware 4.10 & Win XP Sp2
Hi folks Configuration: Novell 4.10 server (fully patched), WinXP Prof SP2 workstation using Novell Client 4.83 SP3. When we go to "My Network Places" and try & navigate, Novell Connections, then double click on the server icon, we get "main" & "sys" shown, if we then try & click on either of these icons we get a warning message as below: " \\server\MAIN is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions." Followed by ...

XP Prof & Eudora 5.2 & netware Client
Can someone confirm why it takes longer to open Eudora in XP then in WIN98.... Users mail are kept on the Netware servers... and a possible fix which will speed the startup procedure Old setup Win98 with Netware 3.40 client New setup XP Prof with Netware 4.83 Sp2 or 4.9 with Pack A Any ideas greatly appreciated. many thanks Faiz Faiz, There is a lot of over-head in XP. Have you tried doing any clean-up, disabling services, applying tweaks as posted thoroughout this forum, etc.? OEM image of XP or your own? IP, IPX or both? -- Tony Pedretti TransUni...

Client 4.83 Sp3 & Win XP Prof to Netware 4.10 Server
Hi Guys First time of posting, can anyone help me? We have a Netware 4.10 server (patched to latest) working fine with Win98 Pc's using Novell Client. All runs so fine you wouldn't believe it. Now trying to add some new workstation PC's, which have Win XP Professional SP2 on them. I'm using Novell Client 4.83 SP3 (seen that this is best to use from reading some of the posts for this type of configuration). We can get the machines to see the server fine, but we seem to have a couple of problems which I'd appreciate help/comments on. Periodically when logging...

Web resources about - Windows XP & Netware 4.2 Network Printer Captures - novell.netware.winnt-2x-xp

Capture - Wikipedia, the free encyclopedia
Text is available under the Creative Commons Attribution-ShareAlike License ;additional terms may apply. By using this site, you agree to the ...

Report: Facebook Search Engine Would Immediately Capture 25 Percent Of Market
If Facebook were to launch its own search engine right now, it would immediately attract nearly one-quarter of that sector and become the second-most-used ...

Early Look: RootMusic Adds Like-Gating, Email Capture and More to BandPage
RootMusic’s BandPage, the most popular musician profile Facebook Page tab application, has just announced an update with new features for both ...

TimeShutter - Capture changes in aligned snaps everyday! on the App Store on iTunes
Get TimeShutter - Capture changes in aligned snaps everyday! on the App Store. See screenshots and ratings, and read customer reviews.

Google Street View captures dead body on Melbourne street
... fleet of Street View cars have become the 21st century's roving historians, freezing strips of suburbia in time. Their lenses have captured ...

UK scraps carbon capture scheme - The Courier-Mail Search Search
BRITAIN has scrapped plans to spend up to STG1 billion ($A2.08 billion) to help commercialise the technology for capturing carbon dioxide emissions ...

Dash cam captures driver's terrifying near-hit of a girl in Waikiki
A motorist has captured the terrifying moment he nearly mowed down a young girl on a main road in Perth as she crossed the road, seemingly oblivious ...

Paul Fletcher's plan to 'capture' property values to pay for infrastructure
The Turnbull government is looking at tapping the value generated via rising property values to pay for new infrastructure.

Two Brothers Capture a Glorious Selfie With a Bald Eagle They Rescued From a Trap
Michael and Neil Fletcher were hunting in Ontario's Windy Lake when they spotted a bald eagle caught in a claw trap. However, freeing the bird ...

Apple Acquired Faceshift, The Company Behind The Motion Capture In Star Wars
... technology. Apple just made an unexpected purchase: The tech giant has acquired Faceshift , the startup responsible for the motion capture ...

Resources last updated: 12/7/2015 2:04:25 PM