NetWare Remote Manager #2
I set up Netware Remote Manager on a NetWare 6.5 server and am wondering
if Netware 6.0 server health can be monitored within the portal? Is there
a NRM patch that can be applied to NW6.0 servers that will bring these
servers online in NW6.5 NRM?
Thanks in advance,
> I set up Netware Remote Manager on a NetWare 6.5 server and am wondering
> if Netware 6.0 server health can be monitored within the portal? Is there
> a NRM patch that can be applied to NW6.0 servers that will bring these
> servers online in NW6.5 NRM?
NRM is included with NetWare since 5...Netware Remote Manager #2
We are running Netware 6.5 sp2. iManager works perfectly. But when I try
to load Remote Manager I get the login screen but the graphics don't load
properly and once I log in (Have to use the administrator id) I then have to
hit the back button on my browser to get it to display properly. Any
Douglas Danco wrote:
> Good Morning,
> We are running Netware 6.5 sp2. iManager works perfectly. But when I try
> to load Remote Manager I get the login screen but the graphics don't load
> properly and once I ...Printer driver deleted immediately after printer driver installation by remote printer management #2
I have a Windows 2000 Pro SP4 with Novell Client 4.9 SP2. The printer
drivers installed after the user login, but it will be deleted
immediately after a meanwhile. The system event log show "Printer xxxx
is pending deleted". And finally no network printer is installed on
client side. I tried to add the printer driver manaually by access NDPS
Controlled Printer, Windows alerted that it cannot locate the printer
and cannot download the printer driver, but it can shows the printer
status is "Ready" at add printer dialog. I also tried to reinstall the
Novell Cli...access netware remote manager via border manager
I have netware6 with sp2 + BM3.7 on the same server. I have 2 lan
interface: one public interface and one private interface. Users
internet via proxy service. Netware remote manager listen request from
private interface. I want to acces netware remote manager from
using reverse proxy, but this not function.
How make this ??
Don't use reverse proxy. Use an HTTPBIND statement after the HTTPSTK
load command to have NRM listen on the public IP address. You also
need to have filter exceptions allowing the ports involved. Have a
look in the Knowledg...Cannot install iManager 2.0.2 on Netware 6
When I attempt to install iManager 2.0.2 on a Netware 6SP3 (eDir873)
server I get an error during the GUI install that says "Unable to
authenticate through secure LDAP". I ran through PKIDIAG option 4 then 0
and didn't find any errors, TCPCON shows port 636 listening, and I've also
tested SSL over LDAP using the following TID and found the test successful:
How to test LDAP over SSL - TID10066259
Is there anything else you might suggest to help me get iManager 2.0.2
installed? I'm trying to get iManager 2.0.2 installed so I can install
...unable to install netware-license with imanager 2.7.2
I try to install a new netware license with imanager 2.7.2. When I
choose License-Install new License I get a dialog that says that there
is no server with nlsadapt.nlm loaded or there is a problem with ncp.
My connections work fine. The servers are NetWare 6.5SP8 with edir
8.8.4. Time is in sync. nlsadapt.nlm and nlsadpt2.nlm are loaded on the
server with the master replica.
I have no idea. Does anybody else have one?
Thanks in advance and a good new year, Thomas
Can you try us...Ndps remote printer management error , Cannot remotely install printers
I have a netware 6 server sp4.
Ndps Broker, and manager installed.
Cannot Push a printer using "ndps Remote printer management"
"Refreshing group:\\tree\ (ou's the user is associated with)"
"this object does not have remote printer management installed/setup"
The above 2 x line keeps comming up with each OU group the user is
I have tried the 4.80sp2 client but the errors are not visable"
Thanks in advance
Could you please describe exactly how you configured remote printer
manag...Netware Remote Manager Netware 6.5 SP3 Overlay
Completed a new install of Netware 6.5 SP3 overlay. The log file before
the 1st reboot indicated zero errors.
However, Netware Remote Manager does not launch. Response is:
"ERROR The requested URL could not be retieved"
I have tried http://ip_address:8008 & https://ip_address:8009.
Other web based tools like iManager work fine.
Which files contains the settings that need to be fixed?
> Which files contains the settings that need to be fixed?
Verify on the server that HTTPSTK and PORTAL are loading - if they're
not, look in the logger s...DNN 2.1.2: Remote server install problems
I am finally migrating my personal web site from DNN 1 to DNN 2.1.2 I decided to do a clean install rather than an upgrade.
Everything is in place as it should be: database with a DBO account, connection string in the web.config, SqlDataProvider as default data provider, all files copied over.... Everything but the file system security is configured exactly as it should be. My host will not configure the file system security as instructed. Instead, they instructed me to put "<identity impersonate="true" />" in the web.config file. Fine, that should work. It work...iManager 2.0.2 not install with Netware 6.5 SP3
I have three server netware 6.5 with SP2 and I have installed one new server
with Netware 6.5 with SP3 (I used the CD NW6.5 with SP3 ). I chose the
traditional installation of netware with imanager 2.0.2 but I have one error
during the installation:
FATAL error "server_name.dominio" convert in LDAP
From workstaion is not possible to connect to this page web:
is possible connect only to
Is there a solution to the problem ?
Gianluigi Cortinovis...Installing one Netware 4.2 in a Netware 5.1 enviroment
We have to install a Netware 4.2 server in a Netware 5.1 SP6
with NDS Version 85.30 (Twenty 5.1 Servers). We also so have three
Netware 6 servers with eDir 8.6.2
Can we do this?
If so what patches and problems should we expect?
Yes, you can do this. Apply SP9 after installing 4.2, then the latest
DS update, v6.21. You can get them here:
Look for other patches you might want/need here:
http://support.novell.com/filef...Can iManager 2.0.2 installed into Netware 6.0.
Can iManager 2.0.2 installed into Netware 6.0 + sp4 box with Apache 2.0
From document, iManager 2.0.2 need Web services -- HTTP server, whichis
apache 1.3, and Apache 2.0 doesn't support
But if we want Identity Manager 2.0 there is another requirement
iManager 2.0.2 and Apache 2.0.48
Yes, I got iManager 2.0.2 installed onto my NW 6 SP4 running at home.
All I needed to do, was to apply JVM 1.4.2 before installing iManager.
I don't remember what Apache server version I have. But it should be
the one shippig with NW6/SP4.
...Manually install imanager 2.0.2 on Netware 6.0
Hi there, I was wondering if it was possible to manually install iManager
2.0.2 on a Netware 6 server. I have found the TID on how to perform this on
a Netware 6.5 server but not for Netware 6.0. If it is possible, could
anyone point me to the right documentation?
Thanks for your help!
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at h...Yast2 Software Manager crashes after installing KDE 4.2.2
I installed KDE 4.2.2 (factory) recently. Everything went fine and I'm
loving it. However, I noticed one problem: when I try an update through
Yast2 software manager, in Package > All packages > Update if newer
version available, the software manager freezes. I have to do a force
quit and then kill y2base in system monitor to get it working again.
Has anyone else experienced this and found out what causes it? Thanks.
You should be using this repo now really