10.2.0 to 10.3.3
When deploying an update to the ZCM Agent on various workstations from
10.2 (exact sub-version unknown, I can get it if necessary) to 10.3.3
with the requisite stopover at 10.3.0a, in many though not all cases the
update "hangs" waiting for CASA.MSI to be processed.
During the processing of CASA.MSI, it launches a sub-process of
'micasad.exe /install'. (In some cases it does this twice, the second
time with additional arguments for a REINSTALL scenario.)
micasad.exe itself then launches a sub-process of 'regsvr32 /s /n /i
lcredmgr.dll' (with full paths, ...
ZCM 10.2.2 upgrade to ZCM 10.3.0/10.3.1
Hi All, I want to check if want to upgrade from ZCM 10.2.2 to ZCM
10..3.0/10.3.1
What kind of things I need to prepare?
My server is under SLES 10 SP3
Hope you can provide me the solution and answer on that.
--
wcpon
------------------------------------------------------------------------
Click the following link for the 10.3.1 update readme:
'Update for ZENworks 10 Configuration Management SP3 (10.3.1)'
(http://www.novell.com/documentation/zcm10/readme/readme_zcm1031.html)
See the support matrix table for the different supported versions.
--
*DEV*...
ZCM 10.2.2 - 10.3 on a windows server 2008 R2 server
Hi there, I have ZCM 10.2.2 running on a windows 2008 R2 server, this
has been running some time in a test enviroment and is working fine with
client devices etc but the issue was the fact that the ZAA on the server
wouldnt register/recognise server etc, now that i'm trying to deploy the
10.3a update it wont update on the server as its the ZAA that performs
the update, what can i do to get this recognised by the system -
basically i want to have a 10.3 enviroment before it is rolled out live,
i would prefer not to have to start afresh as i have compiled lots of
bundles and confi...
10.3.0a top 10.3.3 help>>about satys 10.3.2
Greetings,
I have just upgraded to 10.3.3 from 10.3.0a
When i open nalwin and go to about >> help it says 10.3.2
The file versions all say 10.3.3
Is this merely cosmetic?
--
Don
------------------------------------------------------------------------
Donasutton,
> I have just upgraded to 10.3.3 from 10.3.0a
>
> When i open nalwin and go to about >> help it says 10.3.2
>
> The file versions all say 10.3.3
>
> Is this merely cosmetic?
You are correct. Never noticed it when I upgraded. NALWIN is merely a
"wra...
10.2.2->10.3 Works, just 10.3 install doesn't
I have a very odd issue. If i install 10.2.2 and then upgrade it to
10.3 through the system update deployment, everything works fine.
If i try to install 10.3 on a fresh machine without installing 10.2.2
first it starts failing on things like downloading DAU, downloading
group policy files, etc.
Any ideas? I have run the post-10.3 patch after installing it the day
it came out. I have rebuilt my preagent packages.....still not
working...
Primary Server 1 10.3 Win2k8
Primary Server 2 10.3 Linux VMware appliance
clients are all windows xp sp3
--
adisarro
---------...
Smoke [5.8.3] 22251 FAIL(m) (Windows98) windows 4.10 (Windows98) windowsAutomated smoke report for 5.8.3 patch 22251 on (Windows98) windows - 4.10 =
(x86)
(momotaro) using version=20
Report by Test::Smoke v1.18.10 (perl 5.8.2) [47 seconds]
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D test(s) failed under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
22251 Configuration (common) -DCCHOME=3DC:\m -DCCTYPE=3DGCC
-DIS_WIN95=3Ddefine -Dgcc_v3_2
---...
Update 10.3.2 to 10.3.3 on primary server (sles 10) fails?we tried to upgrade from 10.3.2 to 10.3.3 on the primary server first (Sles
10 SP3).
Although the deployment stage reported success - the server shows still
10.3.2 for ZCM, ZAM und ZPM.
we then tried to deploy 10.3.3 for one win7 sp1 workstation - with success.
so, what can be done to bring the primary server to 10.3.3 or is it just
showing the wrong version?
Thanks for any help
Andrej
Hi!
I've same here -- "Update for ZCM (10.3.3) - Update Completed", but
server (SLES 11) show via ZCC 10.2.2. All updated WS's show 10.3.3. But,
I have "slight"...
Uninstall 10.3.2 before loading 10.3.3
Is there a work around for installing 10.3.3 agent on top of 10.3.2?
Currently if I try to run the executable, it tells me that I have to
uninstall the old agent first before I can load the new one, seems to
take quite a bit of time.
I do not want to use ZENworks to roll it out due to inconsistancies of
how long the rollout takes.
Thoughts? Suggestions?
Woody Harper
Velcro USA Inc
--
wharper
------------------------------------------------------------------------
Use System Update?
On 7/13/2011 1:36 PM, wharper wrote:
>
> Is there a work around for i...
10.2.2 to 10.3.2 direct upgrade?
So we've been struggling with Zen 10 for a long time and we just
recently worked with Novell on going directly from 10.2.2 to 10.3.1 on
the clients without having to reboot multiple times... is there going to
be a 10.2.2 to 10.3.2 upgrade? Because it sounds like we're going to
have to reboot twice again??
Also out of curiosity I did a "Check for Updates" and my "Update for
ZCM 10.2.x to ZCM 10.3.1" was removed... yay. :-(
--
jcsmith1
------------------------------------------------------------------------
NOTE: We have not deployed 10.3....
10.2.2 to 10.3.2 upgrade pathHi,
What is the recommended way to upgrade 10.2.2 to 10.3.2?
1. Upgrade primaries and satelittes to 10.3.0a via SU, manually selecting
the servers
2. Upgrade primaries, satelittes and devices to 10.3.2 via SU and stages.
Do I need to upgrade all the devices with 10.3.0a before going to 10.3.2 or
will the 10.3.2 upgrade do this for me as long as the 10.3.0a update is
downloaded and available?
Can 10.2.2 communicate with 10.3.0a/10.3.2 backend?
Thank you
Kasper
Kasper,
have you checked the instructions in the readme? http://www.novell.com/documentation/zcm10/read...
ANN: kbmMW v.3.20.10 Beta 2 CodeGear Edition, Professional Edition and Enterprise Edition released!We are happy to announce the immediate availability of kbmMW v. 3.20.10 Beta
2
Enterprise, Professional and CodeGear Edition's.
The keywords for this release are:
Delphi 2010 support (All Editions)
Continous improved stability and resource optimization (All Editions)
Extensive use of interfaced classes (All Editions)
Improved WIB performance with message redirection (Ent Edition)
Updated UIB database adapter (Pro/Ent Edition)
Updated ODAC database adapter (Pro/Ent Edition)
Updated NexusDB transport (Pro/Ent Edition)
Advanced ActionScript object and array support (En...
ANN: kbmMW v.3.20.10 Beta 2 CodeGear Edition, Professional Edition and Enterprise Edition released!We are happy to announce the immediate availability of kbmMW v. 3.20.10 Beta
2
Enterprise, Professional and CodeGear Edition's.
The keywords for this release are:
Delphi 2010 support (All Editions)
Continous improved stability and resource optimization (All Editions)
Extensive use of interfaced classes (All Editions)
Improved WIB performance with message redirection (Ent Edition)
Updated UIB database adapter (Pro/Ent Edition)
Updated ODAC database adapter (Pro/Ent Edition)
Updated NexusDB transport (Pro/Ent Edition)
Advanced ActionScript object and array support (En...
Downgrade Zenworks 10.3.3 to Zenworks 10.3.2
Hi all..i got a request from customer to do downgrade Zenwork Agent from
10.3.3 to 10.3.2..
In before, we are using 10.3.2 and then, after download 10.3.3, the
mark item in "System Update" move to 10.3.3.. And the status of 10.3.2
has been "Superceded"..while the status for 10.3.3 is "downloaded".
Right now, all workstation and satellite server still using 10.3.2, and
use change their mind to use back 10.3.2...even i suggest to upgrade all
device with the latest version, but user still dont want it.. They ask
me to use 10.3.2 back.. If i delete 10.3.3 ve...
How to revert from 10.3 to 10.2.2
Windows 2003 + ZCM 10.3. Same problems as many others with SP3. We want
to revert to 10.2.2. Is there anyway to do this or is a complete restore
of the server the only possible solution?
We already tried a restore of the complete D:\Novell (this is our ZCM
installation path) but after ythat the "Novell Zenworks Embeded
Datastore" won't start anymore.
--
dali
------------------------------------------------------------------------
dali;1961615 Wrote:
> Windows 2003 + ZCM 10.3. Same problems as many others with SP3. We want
> to revert to 10.2.2. Is ...
[ANN] Security Advisory for Bugzilla 3.0.10, 3.2.5, 3.4.4, and 3.5.2-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Summary
=======
Bugzilla is a Web-based bug-tracking system, used by a large number of
software projects.
This advisory covers two security issues that have recently been
fixed in the Bugzilla code:
+ Some files stored on the web server are not correctly protected
against external access and can be viewed from a web browser.
+ Restricting a bug to a group while moving the bug to another product
has no effect if the group is not used by both products. The bug may
become public if no other group restriction applies.
All...