"MSI log returned non-zero error code 1603" error when installing Web Services

Background: 

  • I installed MPS on a VPC and I use it as MPS Engine, MPS SQL Server and AD server.
  • In order to do that, I used the Provisioning Deployment Tool as indicated in the Build Service Provisioning instructions.
  • I didn't complete the "DWSPV.28: To move MPSSQL01 into the SQL OU" procedure because I'm using just one VPC and I put it into the Provisioning back-end servers OU (as told in DWSPV.29 procedure).

The issue: 

  • When I follow procedure DWSPV.40, to install the Web Services and MPF Client component on PROV01 (which is the same as MPS01, MPSSQL01, etc in my case); I get the following error:

Exception: Microsoft.Provisioning.DeploymentTool.Engine.DeploymentExceptionDeploymentFailed
HResult: -2146233088
Message: Deployment interrupted because of a failure. See inner exception.

Stack Trace:
   at Microsoft.Provisioning.DeploymentTool.Engine.Deployment.DoDeploymentWork()
   at Microsoft.Provisioning.DeploymentTool.MainForm.ExecuteDeploymentSlice()

--------------------

Inner Exception (1): System.Exception
HResult: -2146233088
Message: MSI log returned non-zero error code 1603

Stack Trace:
   at Microsoft.Provisioning.DeploymentTool.Engine.MsiDeploymentAction.CheckForFinished()
   at Microsoft.Provisioning.DeploymentTool.Engine.DeploymentAction.Update()

Any clue? Thanks in advance

0
ariel
4/11/2007 10:56:53 PM
asp.net.mps 1200 articles. 0 followers. Follow

8 Replies
838 Views

Similar Articles

[PageSpeed] 49

Since this is a consolidated install then you should not do: DWSPV.29 procedure or move any svrs into any svr roles in AD.

Also, the error msg is a little vague. Does event log show anything?

Steve

0
Steve
4/12/2007 9:12:46 AM

1. HMC 3.5 MUST be installed on SQL Server 2000 SP3. Than you can upgrade it to SP4, or even try to upgrade to SQL Server 2005. Pure MPS can be installed on SQL Server 2005.

2. SQL Server can't run properly on domain controllers.


Regards,

Dmitri Gaikovoi

P.S. Checks, mark post as answered, or simple "Thank you" will be really appreciated. Geeked


http://services.mail2web.com
http://myhosting.com
0
DmitriG
4/12/2007 1:36:03 PM

Thanks Steve and Dmitri.

Steve:

  • I undid the DWSPV.29 procedure.
  • Event Viewer traces:
    • Application
      • Error: MpsRemoteExecSvc
        • "Service cannot be started. The handle is invalid."
    • System
      • Warning: W3SVC
        • "The identity of application pool, 'MPFClientAcctPool' is invalid.  If it remains invalid when the first request for the application pool is processed, the application pool will be disabled.  The data field contains the error number."

Dmitri:

  • I followed instructions on "Prepare the MPS Database", that includes "Procedure DWSPV.18: To install SQL Server 2005" so I guess I'm doing a "pure" MPS installation.
  • "SQL Server can't run properly on domain controllers.": I know it can downgrade the performance, but right now I'm evaluating MPS so I guess that if it just works its ok.

The MPFClientAcctPool was stopped after getting the error so I started but then I get the same error.

Thanks again!

Ariel Schapiro

 

0
ariel
4/12/2007 3:39:26 PM

What is the identity of MPFClientAcctPool? Is the password correect for this identity account?

Steve

0
Steve
4/12/2007 4:19:03 PM

:-)

I got it. You are deploying "The Microsoft Solution for Windows-based Hosting for Applications version 1.5".

Pure MPS installation happens when you run MPF.msi and walk through setup wizard without any Deployment tools.

Find Windows Installer log file and check it 1603 error.


Regards,

Dmitri Gaikovoi

P.S. Checks, mark post as answered, or simple "Thank you" will be really appreciated. Geeked


http://services.mail2web.com
http://myhosting.com
0
DmitriG
4/12/2007 4:26:55 PM

:)

I checked the .log file and I found the same error as posted here (no answers :( ):

------- Entering SetAppPoolSecurity
------- Entering GetNetBiosComputerName
------- Leaving GetNetBiosComputerName
------- Entering FindWeb
-------  SetAppPoolSecurity: Successfully bound to file:CreateConsumer.asmx
-------  SetAppPoolSecurity: Successfully updated properties for file:CreateConsumer.asmx
-------  Error setting new DACL for: C:\WINDOWS\Temp
Action ended 15:53:18: InstallFinalize. Return value 3.

By checking the IIS I see that the MPSWS virtuaI dir was created but the folder that it points to does not exists: C:\Program Files\Microsoft Hosting\Provisioning\MPSWS\

Thanks!

Ariel Schapiro

0
ariel
4/12/2007 7:03:12 PM

MPFClientAcctPool identity is "WBHLAB\IMPS_MPS01" (WBHLAB is the domain name).

I resetted the password for that user and then changed the one in MPFClientAcctPool so they match but after running the deployment (and getting the error) I find that the MPFClientAcctPool password was changed again.

By reading a little the log file I guess that the deployment updates the user password and uses that password to update the app pool:

------- Entering SetAppPoolAccountPW
------- Entering MakePassword
------- Leaving MakePassword
MSI (s) (A4!D4) [16:04:11:248]: PROPERTY CHANGE: Adding USERPW property. Its value is 'd2X^6:1vevy8PpU9XNCBW'.
------- Leaving SetAppPoolAccountPW
Action ended 16:04:11: SetAppPoolAccountPW. Return value 0.
MSI (s) (A4:D4) [16:04:11:268]: Doing action: SetupCreateVDir
Action start 16:04:11: SetupCreateVDir.
MSI (s) (A4:D4) [16:04:11:288]: PROPERTY CHANGE: Adding CreateVDir property. Its value is '1|MPSWS|C:\Program Files\Microsoft Hosting\Provisioning\MPSWS\|WSVDIR|MD_AUTH_BASIC|MPFClientAcctPool'.
Action ended 16:04:11: SetupCreateVDir. Return value 1.
MSI (s) (A4:D4) [16:04:11:298]: Doing action: SetupDeleteVDir
Action start 16:04:11: SetupDeleteVDir.
MSI (s) (A4:D4) [16:04:11:308]: PROPERTY CHANGE: Adding DeleteVDir property. Its value is 'WSVDIR|MPFClientAcctPool|IMPS_MPS01|IIS_WPG'.
Action ended 16:04:11: SetupDeleteVDir. Return value 1.
MSI (s) (A4:D4) [16:04:11:318]: Doing action: SetupWebServicePoolData
Action start 16:04:11: SetupWebServicePoolData.
MSI (s) (A4:D4) [16:04:11:328]: PROPERTY CHANGE: Adding SetupWebServicePool property. Its value is 'MPFClientAccts|IMPS_MPS01|d2X^6:1vevy8PpU9XNCBW|IIS_WPG|MPFClientAcctPool'.
Action ended 16:04:11: SetupWebServicePoolData. Return value 1.

Thanks!

Ariel Schapiro

0
ariel
4/12/2007 7:23:51 PM
Take a look at my blog post for a workaround at: http://www.vinodunny.com/blog/post/Fix-for-MSI-Error-1603-in-WbH-MPS-Deployment-on-Single-Server.aspx.

Hope this helps.
0
vinodunny
7/14/2008 5:37:37 AM
Reply:

Similar Artilces:

Message: MSI log returned non-zero error code 1603 (installation of Web Service fails)
I'm almost finished with the installation of the MPS Web Services but I get this error: Message: MSI log returned non-zero error code 1603 (installation of Web Service fails) The installation of the ConsumerWeb Service and Resource Manager Web Client goes allright, what can be the problem? On the DC, the following error is reported: "The identity of application pool, 'MPFClientAcctPool' is invalid.  If it remains invalid when the first request for the application pool is processed, the application pool will be disabled.  The data field contains the error number.". D...

MSI log returned non-zero error code 1603
hi!following problem occurs when i try to install the plans database:Exception: System.ExceptionMessage: MSI log returned non-zero error code 1603    Stack Trace:       at Microsoft.Provisioning.DeploymentTool.Engine.MsiDeploymentAction.CheckForFinished()       at Microsoft.Provisioning.DeploymentTool.Engine.DeploymentAction.Update()install details:=== Verbose logging started: 06.07.2005  15:40:41  Build type: SHIP UNICODE 3.01.4000.2435  Calling process: C:\WINDOWS\system32\msiexec.exe ===MSI (c) (2C:0...

"Error Group: WINSOCK" "Error Code:11004"
Hi Just setup iPrint on the server and tried to install the printer to the laptop and got the following message: Error code:11004 Error message: Winsock 11004 - The DNS name has been found in the database, but its associated data is not correct. Error group: WINSOCK Error code:11004 Anyone know what associated data it is referring to? Thanks in advance -- iangh2 A quick Google found this on http://www.sockets.com/err_lst1.htm WSANO_DATA (11004) Valid name, no data record of requested type Berkeley description: The requested name is valid, but does not hav...

v3.5 DWSPV.36 MSI log returned non-zero error code 1603
Hi,I am having problem with Installing the MPS Web Services on  MPSSQL01. I am doing Consolidated Moldel.  Error installing MPF Client component on MPSSQL01 Error return is ...  Exception: System.Exception Message: MSI log returned non-zero error code 1603 Stack Trace: at Microsoft.Provisioning.DeploymentTool.Engine.MsiDeploymentAction.CheckForFinished() at Microsoft.Provisioning.DeploymentTool.Engine.DeploymentAction.Update()commandline detail: msiexec /i "\\SFMPSSQL01\MSIShare\MPF.msi" /qn /L*v! "\\SFMPSSQL01\ConfigShare\Log\Mpf Clie...

I couldn't install Visual Studio.Net 2003, while installing an error message "Internal Error is comming"
[DMW: deleted due to the length of the log, and what follows is what's important][09/29/05,14:28:23] Visual Studio .NET Enterprise Architect 2003 - English: ***ERRORLOG EVENT*** : ACTION FAILURE: Action ended 14:28:23: CADpc.D0DF3458_A845_11D3_8D0A_0050046416B9. Return value 3. See MSI log for details.[09/29/05,14:28:23] Visual Studio .NET Enterprise Architect 2003 - English: ***ERRORLOG EVENT*** : ACTION FAILURE: Action ended 14:28:23: INSTALL. Return value 3. See MSI log for details.[09/29/05,14:28:30] Visual Studio .NET Enterprise Architect 2003 - English: MsiInstallProduct return cod...

The DataWindow "Retrieve" method is returning "Select Error: ORA-00942: table or view does not exist" error.
Hi, I am getting "Select Error: ORA-00942: table or view does not exist" error when I try to RETRIEVE from datawindow. my code is "this.retrieve(wo_no)". Please some one can help me on this. Thanks, Ravi. Please don't crosspost - already answered you in the datawindow forum. -- Evita Chapa Senior Systems Analyst Command Technologies, Inc. <Ravi> wrote in message news:425fa64e.6317.1681692777@sybase.com... > Hi, > > > I am getting "Select Error: ORA-00942: table or view does > not exist" error when I t...

The DataWindow "Retrieve" method is returning "Select Error: ORA-00942: table or view does not exist" error.
Hi I am getting "Select Error: ORA-00942: table or view does not exist" error when I try to retrieve data through Datawindow. The code I am using is "THIS.RETRIEVE(wo_no)". This code is returning "Select Error: ORA-00942: table or view does not exist" error. Please some one can help on this. Thanks, Ravi. I've usually seen this error when I don't have permission to select on a table. -- Evita Chapa Senior Systems Analyst Command Technologies, Inc. <Ravi> wrote in message news:425fa7c0.6322.1681692777@sybase.com... &...

ZLib's "inflate" returns code -5, "buffer error". Now what?
I have used the ZLIb routines extensively in a project, and it they have worked fine ... until now. Even though it compresses and decompresses just fine for thousands of instances, in one particular case a call to ZDecompressStream throws an exception. Tracing into ZDecompressStream (source shown below), we get as far as the last line shown here, when "inflate" returns a value of -5. ZCompressCheck receives that, and so it does a "raise EZCompressionError.Create" with the message "buffer error". That doesn't tell me much of anything about what the prob...

Getting the error while installing MPS Web Service on PROV01 (DW.85). Error 1603.
Hello, Getting the error while "installing MPS Web Service on PROV01 (DW.85)". It does Install WEb Service, consumer webservice and resource manager web client but fails on MPF Client with the error shown below. I already checked that IMPS_ServerName is part of MPFClientAccts group. I deleted MPFClientAccts and reran the deployment procedure but still got same error. Any help will be appreciated. Thank you, --- Jinesh. ================ Exception: Microsoft.Provisioning.DeploymentTool.Engine.DeploymentExceptionMessage: Could not perform any further deployment actions because: Deploymen...

Web Methodst that returns DataTable gives me exception error " "circular reference was detected while serializing an object of type""
Hello, I am getting this error "circular reference was detected while serializing an object of type". The Method GetRecords() is a function that returns DataTable type.. It happens the same thing when i return DataSet as well. Any help? Thanks    function GetStatusRecord() {   // Invoke the Echo method on the server.PageMethods.GetRecords('1', onComplete);  debugger; // Callback function.function onComplete(result) { // Display the echoed string. alert(result); }   return false }   The latest version of Asp.net Ajax no lo...

SliderExtender causes client-side error when "decimals" property is non-zero "multiple controls were found with the same id."
Hi, I am getting a client-side error like this: "Multiple controls were found with the same ID. FindControl requires that controls have unique ids". Ok, that's fine, and normally very easy to fix. But I am getting the error to occur under very strict circumstances. 1. The user controls are inside an update panel 2. There are at least two ajax sliderextenders with their "decimals" property set to a non-zero value. Setting the "decimals" property to zero fixes the problem, though I of course want to have decimals! Is there anything I c...

Error: "TSA error code: fffcffc5"
we use NW 6.5 and SBCON The backup always works properly the restore i try from time to time works properly too. A view weeks ago we applied SP6 The backup works properly too. now i am trying to restore something. i allways get the error Error: "TSA error code: fffcffc5" Is there a list which describes the errorcodes. Is this a tape-reading error or is this a problem with SP6 I have allready tried the suggestions in TID10065613 ( Unload SMDR and QMAN on the server console. In the container where the server resides, delete the SMS SMDR Group object, the <server...

Web Service Strange Error "Service Description altering attributes cannot be specified on service implementation. "
G'day folks;I built a web service based on a given XLM request message and XML response message following the guidelines provided by Yasser Shohoud in his article "Place XML Message Design Ahead of Schema Planning to Improve Web Service Interoperability"  I used given response and request documents provided by a user manual for an Air Force web service that returns weather imagery.  The web service built correctly.  There was some confusion at first because Yasser used C# and I used vbNet.  The wsdl.exe created a stub file with an interface called IWeatherSe...

VS.NET 2005 is ignoring in web.config strict="true". I get no error when I try this: Dim x As Integer = "string"
Hello,I have this in my VS.NET 2005 web.config <compilation debug="true" strict="true" explicit="true">When I do this in my vb code:Dim x As Integer = "string"I get no error. When I hit compilation I also get no error. What am I doing wrong?Thanks for helping!Regards,J. Bauer It's a bug of some sort See this response by Scott Guthriehttp://lab.msdn.microsoft.com/productfeedback/viewfeedback.aspx?feedbackid=3c1c9898-8076-4f69-a5e2-e99573d03c6e Unfortunately we don’t have a GUI based way to configure this. L It is something we will make sure gets added back in, though, with the next...

Web resources about - "MSI log returned non-zero error code 1603" error when installing Web Services - asp.net.mps

Resources last updated: 12/25/2015 10:31:09 PM